Pd-list September 2006

pd-list@lists.iem.at

139 participants
230 discussions

Pd to Arkaos
by David Kirkpatrick 23 Sep '06

23 Sep '06

Hi, I was wondering if anyone knew of a way to send the GEM window to Arkaos, both on the same computer. I'm using windows XP. One way of doing it would be to send the GEM window to a video out on my graphics card and then stream it to Arkaos with a video capture card, but i'm hoping there is a slightly less clunky way. Could there be a way to get Pd detected as a capture device? Is there an external or 3rd party piece of software that may help? Thanks for the assistance, David Kirkpatrick _________________________________________________________________ Nothing but cars & over 100,000 of them at carsales.com.au http://a.ninemsn.com.au/b.aspx?URL=http%3A%2F%2Fsecure%2Dau%2Eimrworldwide%…

1 0

force arrays to save settings
by hard off 23 Sep '06

23 Sep '06

i want to compile some old drum machine kits in arrays and save those kits as patches. the problem i have is that when i send -resize flags to the arrays, i get the following message: warning: array 2-tabb-L: clearing save-in-patch flag is there any way to disable that so that i can keep the save-in-patch flags? cheers

1 1

[PD-announce] Tonight, Berlin
by cyrille henry 23 Sep '06

23 Sep '06

chdh : a pd/Gem performance. tonight in Berlin free entrance. Glogauer 21 - 21h/00h infos : http://www.basseslumieres.org/projets.php?id=24 ch _______________________________________________ PD-announce mailing list PD-announce(a)iem.at http://lists.puredata.info/listinfo/pd-announce

3 2

Pduino output mode and I/O numbering differences
by David Merrill 22 Sep '06

22 Sep '06

Hello all, I'm playing around with the latest arduino object for pd, and it seems that there is a disconnect between the numbering for port I/O data-direction, and setting the value of a pin. I'm using the arduino-test.pd patch, as well as the [pd DIGITAL-OUTPUT] behavior pulled from the arduino help patch. For instance, I set up a LED on the digital pin numbered 6 that I could turn on and off, just to test it out, and found the following mappings. data direction: checkbox 6 assert a value: checkbox 13 Why does 6 (data direction) correspond to 13 (assert a voltage)? (please see attached image for more clarity about what I mean) thanks, -David Merrill p.s. also, clicking the "pulse all outputs" box in arduino-test.pd crashes PD after a few seconds - I suspect due to a comport problem.. can anyone else replicate this? -- MIT Media Lab dmerrill(a)media.mit.edu

3 4

Miller's pd 0.40 OSX loader
by chris clepper 22 Sep '06

22 Sep '06

Is dlopen() now the only loading code on OSX as of 0.40?

6 11

Successfully compiled Mac OS X Intel externals
by Stefano Papetti 22 Sep '06

22 Sep '06

Hi all, it seems that some people still have doubts about building externals for Mac OS X... so, last week I successfully compiled a few externals for Mac OS X Intel and PPC. Here are the important parts from one of my makefiles (Intel Mac): MACOSXCFLAGS = -DMACOSX -DPD OPTIM = -O2 PARANOID = -Wall -W -Wstrict-prototypes \ -Wno-unused -Wno-parentheses -Wno-switch MACOSXSOUNDINCLUDE = -I$(RESOS)/modal_object -I$(RESOS)/waveguide_object -I$(RESOS)/inertial_object \ -I$(INTERS)/impact_interactor -I$(INTERS)/linpact_interactor -I$(INTERS)/friction_interactor CFLAGS = $(MACOSXCFLAGS) $(MACOSXINCLUDE) $(MACOSXSOUNDINCLUDE) $(OPTIM) $(PARANOID) TARGET = friction_2modalb~ OBJ = friction_interactor.o modal_obj_b.o matrix_calc.o all: $(TARGET).pd_darwin install $(TARGET).pd_darwin: $(TARGET).o $(OBJ) cd $(OBJDIR) ; \ $(CC) -arch i386 -bundle -undefined suppress -flat_namespace \ -o $(TARGET).pd_darwin $(TARGET).o $(OBJ) -lm $(TARGET).o: $(TARGET).c \ pd_modules.h \ friction_interactor.h \ modal_obj_b.h \ matrix_calc.h install: -strip -x $(OBJDIR)/$(TARGET).pd_darwin -mv $(OBJDIR)/$(TARGET).pd_darwin $(MACOSXBINDIR) %.o: %.c \ pd_modules.h [ -d $(TOP)/obj_macosx ] || mkdir $(TOP)/obj_macosx $(CC) -g $(CFLAGS) -c -o $(OBJDIR)/$@ $< and to compile on a G4 I just changed -arch i386 to -arch ppc. They work great! Hope this helps. Greetings, Stefano

5 11

[PD-announce] Pd 0.40-0 test 08 released
by Miller Puckette 22 Sep '06

22 Sep '06

Hi all, Pd 0.40-0 test 08 is available from http://www-crca.ucsd.edu/~msp/software.html I hope I've fixed the problem of Pd crashing on startup on certain Windows boxes. A few other small bug fixes too. cheers Miller _______________________________________________ PD-announce mailing list PD-announce(a)iem.at http://lists.puredata.info/listinfo/pd-announce

5 4

[Gem]: "Failed to map depth buffer"
by Roman Haefeli 21 Sep '06

21 Sep '06

hi all since some time, i don't recall since when exactly - a few weeks or so, i cannot use gem anymore. as soon as i send [create( to [gemwin], i get in the stderr: 'fglrx: Failed to map depth buffer!' and the pd-window says: 'Direct Rendering enabled! GEM: Start rendering' the gem-window does pop-up, but instead of the black background it just shows the desktop from behind (framebuffer not cleared?). i think it started to happen after an 'xorg-driver-fglrx'-update, but i am not sure. recompiling gem didn't help. the system: -always up-to-date ubuntu dapper -pd_40test3-test5 -Gem 0.91-cvs (checked out last week) i don't know too much about this stuff, so i am not sure if this really is related to gem or to fglrx (or something else). the only i can tell: 3dp (the opengl-part of pdp) seems to work fine. also fgl_glxgears or glxgears works. also the glx-output of pdp [pdp_glx] works, but for some reason i can only create one window. a second [pdp_glx]-window stays white and i get the same error on stderr ('fglrx: Failed to map depth buffer!') and when creating a third one, pd crashes. otoh, i can create as many windows i want with mplayer using '-vo gl'. this all is quite confusing me and i don't know where to start right now. googling the error-message didn't help me a lot. any suggestions are very appreciated. ciao roman just in case this could be important info, the 'device'-section of my xorg.conf: <paste> # === ATI device section === Section "Device" Identifier "ATI Graphics Adapter connector 0" Driver "fglrx" # ### generic DRI settings ### # === disable PnP Monitor === #Option "NoDDC" # === disable/enable XAA/DRI === Option "no_accel" "no" Option "no_dri" "no" # === misc DRI settings === Option "mtrr" "off" # disable DRI mtrr mapper, driver has its own code for mtrr # ### FireGL DDX driver module specific settings ### # === Screen Management === Option "DesktopSetup" "(null)" Option "ScreenOverlap" "0" Option "GammaCorrectionI" "0x06419064" Option "GammaCorrectionII" "0x06419064" # === OpenGL specific profiles/settings === Option "Capabilities" "0x00000000" Option "CapabilitiesEx" "0x00000000" # === Video Overlay for the Xv extension === Option "VideoOverlay" "on" # === OpenGL Overlay === # Note: When OpenGL Overlay is enabled, Video Overlay # will be disabled automatically Option "OpenGLOverlay" "off" # === Center Mode (Laptops only) === Option "CenterMode" "off" # === Pseudo Color Visuals (8-bit visuals) === Option "PseudoColorVisuals" "off" # === QBS Management === Option "Stereo" "off" Option "StereoSyncEnable" "1" # === FSAA Management === Option "FSAAEnable" "no" Option "FSAAScale" "1" Option "FSAADisableGamma" "no" Option "FSAACustomizeMSPos" "no" Option "FSAAMSPosX0" "0.000000" Option "FSAAMSPosY0" "0.000000" Option "FSAAMSPosX1" "0.000000" Option "FSAAMSPosY1" "0.000000" Option "FSAAMSPosX2" "0.000000" Option "FSAAMSPosY2" "0.000000" Option "FSAAMSPosX3" "0.000000" Option "FSAAMSPosY3" "0.000000" Option "FSAAMSPosX4" "0.000000" Option "FSAAMSPosY4" "0.000000" Option "FSAAMSPosX5" "0.000000" Option "FSAAMSPosY5" "0.000000" # === Misc Options === Option "UseFastTLS" "0" Option "BlockSignalsOnLock" "on" Option "UseInternalAGPGART" "yes" Option "ForceGenericCPU" "no" BusID "PCI:1:0:0" # vendor=1002, device=4e50 Screen 0 EndSection </paste> ___________________________________________________________ Der frühe Vogel fängt den Wurm. Hier gelangen Sie zum neuen Yahoo! Mail: http://mail.yahoo.de

1 1

Pd 0.40-0 test 08
by martin.peach＠sympatico.ca 21 Sep '06

21 Sep '06

On WinXP the MIDI settings dialog now appears, but the settings are offset by one. My menu has 6 output devices: none Microsoft MIDI mapper Out-A USB MidiSport 2X2 Out-B USB MidiSport 2X2 MPU-401 Microsoft GS Wavetable SW Synth but if I select Out-A I get the Midi mapper, and Out-B goves me Out-A instead. Martin

3 2

Re: [PD] py/pyext missing in pd-extended
by Carlos Pita 21 Sep '06

21 Sep '06

Oh, I think I finally worked out it. It had to do with the optimization flags in buildsys/config-lnx-pd-gcc.txt. After commenting out: # UFLAGS=-msse -mfpmath=sse -ffast-math # OFLAGS+=-march=pentium4 and rebuilding it, the py external seems to work out just fine now. Perhaps the defaults should be established to more generic values, don't you think? Best regards, Carlos --- Carlos Pita <carlosjosepita(a)yahoo.com.ar> escribiÃ³: > Mh, I'm not sure but the following warning could be > related to the problem (it's not shown for single py > builds). > Regards, > Carlos > > In file included from > /usr/include/python2.4/Python.h:8, > from source/pyprefix.h:24, > from source/main.h:14, > from source/pybase.h:14, > from source/main.cpp:11: > /usr/include/python2.4/pyconfig.h:838:1: warning: > "_POSIX_C_SOURCE" redefined > In file included from /usr/include/pthread.h:18, > from > /site/install/flext-cvs/include/flext/flext.h:41, > from source/pyprefix.h:15, > from source/main.h:14, > from source/pybase.h:14, > from source/main.cpp:11: > /usr/include/features.h:150:1: warning: this is the > location of the previous definition > > > -- Carlos Pita <carlosjosepita(a)yahoo.com.ar> > escribiÃ³: > > > Hi all! > > > > I'm not able to build a functional py external > from > > the sources. I have tried (almost all) the > > combinations obtained along these 4 axes: > > > > pd) cvs / 0.39-2 > > > > flext+py) cvs / 0.5.0+0.2.0 > > > > py build kind) build-release-single / > > build-release-multi > > > > python) 2.3.? (can't remember) / 2.4.4 > > > > multi builds simply kill off pd during startup. > The > > single ones let pd start but then many actions > from > > the py sample patches abort pd execution (while > > others > > seem to work fine, I can't detect any pattern > here). > > > > Any ideas? I've spent almost an entire day trying > to > > add python support to pd, it's getting very > > frustrating. > > > > Thank you in advace. > > Regards, > > Carlos > > > > > > > > --- Thomas Grill <gr(a)grrrr.org> escribiÃ³: > > > > > > > > > > > Hans-Christoph Steiner schrieb: > > > > > > > > On Sep 20, 2006, at 6:39 PM, Thomas Grill > wrote: > > > > > > > >> Hi all, > > > >>> of course you could also try to support > > thomas's > > > build system ... > > > >>> but it > > > >>> seems, there's no one, who's interested in > > doing > > > the work... > > > >>> > > > >> compiling flext and flext-based externals is > > > pretty straightforward. > > > >> One could just ignore the flext build system, > > > building flext as a > > > >> shared or static library (with the first > option > > > preferred), and based > > > >> on that compile the externals. For > preprocessor > > > definitions just > > > >> FLEXT_SYS=2 and FLEXT_SHARED (in the case of > a > > > shared library) have > > > >> to be defined, although some more are > optional. > > > > > > > > I assume this would be using g++. Are flext > > files > > > all .cc and .cpp? > > > yes, .cpp only. > > > > > > greetings, Thomas > > > > > > -- > > > Thomas Grill > > > http://grrrr.org > > > > > > > > > > > > _______________________________________________ > > > PD-list(a)iem.at mailing list > > > UNSUBSCRIBE and account-management -> > > > http://lists.puredata.info/listinfo/pd-list > > > > > > > > > > > > > > > > > __________________________________________________ > > PreguntÃ¡. RespondÃ©. DescubrÃ. > > Todo lo que querÃas saber, y lo que ni imaginabas, > > estÃ¡ en Yahoo! Respuestas (Beta). > > Â¡Probalo ya! > > http://www.yahoo.com.ar/respuestas > > > > > > _______________________________________________ > > PD-list(a)iem.at mailing list > > UNSUBSCRIBE and account-management -> > > http://lists.puredata.info/listinfo/pd-list > > > > > > > > > __________________________________________________ > PreguntÃ¡. RespondÃ©. DescubrÃ. > Todo lo que querÃas saber, y lo que ni imaginabas, > estÃ¡ en Yahoo! Respuestas (Beta). > Â¡Probalo ya! > http://www.yahoo.com.ar/respuestas > > __________________________________________________ PreguntÃ¡. RespondÃ©. DescubrÃ. Todo lo que querÃas saber, y lo que ni imaginabas, estÃ¡ en Yahoo! Respuestas (Beta). Â¡Probalo ya! http://www.yahoo.com.ar/respuestas

1 0

← Newer
1
...
5
6
7
8
9
10
11
...
23
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

Pd-list September 2006