hello everyone,
In the link below there is a video documentation of a brand new performance with the new MANO Controller called Silent Construction 2 in a new webpage... lots of new things... For those who were in Sao Paulo for the PdCon you may have heard Silent Construction 1 (for Silent Drum). As in that case everything is done in Pd/GEM and a few new externals...
hope you like it...:
http://www.jaimeoliver.pe/workobra/silent-construction-series/sc2
best,
J
I like the expressivity in the gestures that you've managed to harness
.hc
On Apr 13, 2010, at 10:11 PM, Jaime Oliver wrote:
hello everyone,
In the link below there is a video documentation of a brand new
performance with the new MANO Controller called Silent Construction
2 in a new webpage... lots of new things... For those who were in Sao Paulo for the PdCon you may have heard
Silent Construction 1 (for Silent Drum). As in that case everything
is done in Pd/GEM and a few new externals...hope you like it...:
http://www.jaimeoliver.pe/workobra/silent-construction-series/sc2
best,
J
-- Jaime E Oliver LR
www.jaimeoliver.pe
858 750 0924 (cel) 858 202 1522 (home) 9168 Regents Rd. Apt. G La Jolla, CA 92037 USA _______________________________________________ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list
The arc of history bends towards justice. - Dr. Martin Luther
King, Jr.
thanks! j
On Wed, Apr 14, 2010 at 12:58 PM, Hans-Christoph Steiner hans@at.or.atwrote:
I like the expressivity in the gestures that you've managed to harness
.hc
On Apr 13, 2010, at 10:11 PM, Jaime Oliver wrote:
hello everyone,
In the link below there is a video documentation of a brand new performance with the new MANO Controller called Silent Construction 2 in a new webpage... lots of new things... For those who were in Sao Paulo for the PdCon you may have heard Silent Construction 1 (for Silent Drum). As in that case everything is done in Pd/GEM and a few new externals...
hope you like it...:
http://www.jaimeoliver.pe/workobra/silent-construction-series/sc2
best,
J
-- Jaime E Oliver LR
www.jaimeoliver.pe
858 750 0924 (cel) 858 202 1522 (home) 9168 Regents Rd. Apt. G La Jolla, CA 92037 USA _______________________________________________ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list
The arc of history bends towards justice. - Dr. Martin Luther King, Jr.
once again, Jamie. Seriously impressed with this interface. Is there any video explaining this, as there was with the silent drum? Date: Wed, 14 Apr 2010 13:47:34 -0700 From: jaime.oliver2@gmail.com To: hans@at.or.at CC: pd-list@iem.at Subject: Re: [PD] second instrument/piece in the silent percussion project...
thanks! j
On Wed, Apr 14, 2010 at 12:58 PM, Hans-Christoph Steiner hans@at.or.at wrote:
I like the expressivity in the gestures that you've managed to harness .hc On Apr 13, 2010, at 10:11 PM, Jaime Oliver wrote:
hello everyone, In the link below there is a video documentation of a brand new performance with the new MANO Controller called Silent Construction 2 in a new webpage... lots of new things... For those who were in Sao Paulo for the PdCon you may have heard Silent Construction 1 (for Silent Drum). As in that case everything is done in Pd/GEM and a few new externals... hope you like it...:
http://www.jaimeoliver.pe/workobra/silent-construction-series/sc2 best,
J
_________________________________________________________________ http://clk.atdmt.com/UKM/go/197222280/direct/01/ Do you have a story that started on Hotmail? Tell us now
thx again.
no video explaining yet... not enough time, but i'll get to that soon, probably in one or two months and post it to the list. I'll probably get chunks of this video, post the original samples and explain their manipulations as their might not be enough time to shoot video again...
J
On Wed, Apr 14, 2010 at 3:03 PM, Andrew Faraday jbturgid@hotmail.comwrote:
once again, Jamie. Seriously impressed with this interface.
Is there any video explaining this, as there was with the silent drum?
Date: Wed, 14 Apr 2010 13:47:34 -0700 From: jaime.oliver2@gmail.com To: hans@at.or.at CC: pd-list@iem.at Subject: Re: [PD] second instrument/piece in the silent percussion project...
thanks! j
On Wed, Apr 14, 2010 at 12:58 PM, Hans-Christoph Steiner hans@at.or.atwrote:
I like the expressivity in the gestures that you've managed to harness
.hc
On Apr 13, 2010, at 10:11 PM, Jaime Oliver wrote:
hello everyone,
In the link below there is a video documentation of a brand new performance with the new MANO Controller called Silent Construction 2 in a new webpage... lots of new things... For those who were in Sao Paulo for the PdCon you may have heard Silent Construction 1 (for Silent Drum). As in that case everything is done in Pd/GEM and a few new externals...
hope you like it...:
http://www.jaimeoliver.pe/workobra/silent-construction-series/sc2
best,
J
-- Jaime E Oliver LR
www.jaimeoliver.pe
858 750 0924 (cel) 858 202 1522 (home) 9168 Regents Rd. Apt. G La Jolla, CA 92037 USA _______________________________________________ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list
The arc of history bends towards justice. - Dr. Martin Luther King, Jr.
-- Jaime E Oliver LR
www.jaimeoliver.pe
858 750 0924 (cel) 858 202 1522 (home) 9168 Regents Rd. Apt. G La Jolla, CA 92037 USA
Get a new e-mail account with Hotmail - Free. Sign-up now.http://clk.atdmt.com/UKM/go/197222280/direct/01/
Pd-list@iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list
Hello Jaime,
I would like to use your Mano Controller, but encounter some problems. I compile GEM with pix_hand and can create the [pix_hand] object. However, when i try to open main.pd (from /hand/track), i get in Pd console :
/home/jack/Bureau/hand/track/../externals/best_match.pd_linux: /home/jack/Bureau/hand/track/../externals/best_match.pd_linux: wrong ELF class: ELFCLASS64 best_match ... couldn't create /home/jack/Bureau/hand/track/../externals/fill0s.pd_linux: /home/jack/Bureau/hand/track/../externals/fill0s.pd_linux: wrong ELF class: ELFCLASS64 fill0s 8
So i decided to compile them with 'make' and got : echo make pd_linux, pd_nt, pd_irix5, or pd_irix6 make pd_linux, pd_nt, pd_irix5, or pd_irix6
Then i try make pd_linux (?) and got :
make: *** No rule to make target obj1.pd_linux', needed bypd_linux'.
Stop.
I am sure to miss something but what ? Thanx for help. ++
Jack
Le mardi 13 avril 2010 à 19:11 -0700, Jaime Oliver a écrit :
hello everyone,
In the link below there is a video documentation of a brand new performance with the new MANO Controller called Silent Construction 2 in a new webpage... lots of new things... For those who were in Sao Paulo for the PdCon you may have heard Silent Construction 1 (for Silent Drum). As in that case everything is done in Pd/GEM and a few new externals...
hope you like it...:
http://www.jaimeoliver.pe/workobra/silent-construction-series/sc2
best,
J
-- Jaime E Oliver LR
www.jaimeoliver.pe
858 750 0924 (cel) 858 202 1522 (home) 9168 Regents Rd. Apt. G La Jolla, CA 92037 USA
Pd-list@iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list
Hey Jack,
You need to put pix_hand.cpp and pix_hand.h (from the 07-apr-10-current folder) in the Pixes folder in Gem, and compile it like you regularly do.
about best_match, you should have a best_match.pd_linux and you can put it in the extra folder or make a path to ../externals/best_match/ Otherwise, you can get best_match.c and compile it yourself. What I do is to move the folder called best_match in extra, cd into that folder and write make best_match.pd_linux
I'm you glad you're undertaking the project and any help i can give, I'll give. However, you must be aware that it is an ongoing project and it is surely not bug free!
let me know if these recommendations work...
by the way, the big file you downloaded contains the sc2 piece, so you can see how i'm mapping things.
Also, I am using the ps3eye camera in linux (just 40$) at 320x240 with the driver by kaswy (there are a couple threads in the archives about it).
best,
J
On Fri, Apr 16, 2010 at 9:46 AM, Jack jack@rybn.org wrote:
Hello Jaime,
I would like to use your Mano Controller, but encounter some problems. I compile GEM with pix_hand and can create the [pix_hand] object. However, when i try to open main.pd (from /hand/track), i get in Pd console :
/home/jack/Bureau/hand/track/../externals/best_match.pd_linux: /home/jack/Bureau/hand/track/../externals/best_match.pd_linux: wrong ELF class: ELFCLASS64 best_match ... couldn't create /home/jack/Bureau/hand/track/../externals/fill0s.pd_linux: /home/jack/Bureau/hand/track/../externals/fill0s.pd_linux: wrong ELF class: ELFCLASS64 fill0s 8
So i decided to compile them with 'make' and got : echo make pd_linux, pd_nt, pd_irix5, or pd_irix6 make pd_linux, pd_nt, pd_irix5, or pd_irix6
Then i try make pd_linux (?) and got : make: *** No rule to make target
obj1.pd_linux', needed bypd_linux'. Stop.I am sure to miss something but what ? Thanx for help. ++
Jack
Le mardi 13 avril 2010 à 19:11 -0700, Jaime Oliver a écrit :
hello everyone,
In the link below there is a video documentation of a brand new performance with the new MANO Controller called Silent Construction 2 in a new webpage... lots of new things... For those who were in Sao Paulo for the PdCon you may have heard Silent Construction 1 (for Silent Drum). As in that case everything is done in Pd/GEM and a few new externals...
hope you like it...:
http://www.jaimeoliver.pe/workobra/silent-construction-series/sc2
best,
J
-- Jaime E Oliver LR
www.jaimeoliver.pe
858 750 0924 (cel) 858 202 1522 (home) 9168 Regents Rd. Apt. G La Jolla, CA 92037 USA
Pd-list@iem.at mailing list UNSUBSCRIBE and account-management ->
Le vendredi 16 avril 2010 à 10:18 -0700, Jaime Oliver a écrit :
Hey Jack,
You need to put pix_hand.cpp and pix_hand.h (from the 07-apr-10-current folder) in the Pixes folder in Gem, and compile it like you regularly do.
Yes, it is what i did before. So i can create the [pix_hand] (with GEM 0.92-3).
about best_match, you should have a best_match.pd_linux and you can put it in the extra folder or make a path to ../externals/best_match/ Otherwise, you can get best_match.c and compile it yourself. What I do is to move the folder called best_match in extra, cd into that folder and write make best_match.pd_linux
Here was my error, i have forgotten to put a name before .pd_linux :) Now best_match.pd_linux and fill0s.pd_linux compile fine. I have created an 'externals' folder in the pd 'extra' folder and add a path : /usr/lib/pd/extra/externals in Pd. I put the both best_match.pd_linux and fill0s.pd_linux in it. So I can create objects [best_match] and [fill0s] without problem ;)
I'm you glad you're undertaking the project and any help i can give, I'll give. However, you must be aware that it is an ongoing project and it is surely not bug free!
let me know if these recommendations work...
No, i still have a problem. When i open main.pd (from /hand/track), now pd crash (i guess the crash come from the auto create GEM window at startup). Here is what i get from terminal :
pd: malloc.c:3074: sYSMALLOc: Assertion `(old_top == (((mbinptr) (((char *) &((av)->bins[((1) - 1) * 2])) - __builtin_offsetof (struct malloc_chunk, fd)))) && old_size == 0) || ((unsigned long) (old_size) >= (unsigned long)((((__builtin_offsetof (struct malloc_chunk, fd_nextsize))+((2 * (sizeof(size_t))) - 1)) & ~((2 * (sizeof(size_t))) - 1))) && ((old_top)->size & 0x1) && ((unsigned long)old_end & pagemask) == 0)' failed. pd_gui: pd process exited
I give you a simple patch wich crash Pd when i create the GEM window.
by the way, the big file you downloaded contains the sc2 piece, so you can see how i'm mapping things.
Also, I am using the ps3eye camera in linux (just 40$) at 320x240 with the driver by kaswy (there are a couple threads in the archives about it).
Yes, i also use this camera and i have to re-install the kaswy's driver because there is not a full support with the driver brings by ubuntu 9.10. Thanx for your Help. ++
Jack
best,
J
On Fri, Apr 16, 2010 at 9:46 AM, Jack jack@rybn.org wrote: Hello Jaime,
I would like to use your Mano Controller, but encounter some problems. I compile GEM with pix_hand and can create the [pix_hand] object. However, when i try to open main.pd (from /hand/track), i get in Pd console : /home/jack/Bureau/hand/track/../externals/best_match.pd_linux: /home/jack/Bureau/hand/track/../externals/best_match.pd_linux: wrong ELF class: ELFCLASS64 best_match ... couldn't create /home/jack/Bureau/hand/track/../externals/fill0s.pd_linux: /home/jack/Bureau/hand/track/../externals/fill0s.pd_linux: wrong ELF class: ELFCLASS64 fill0s 8 So i decided to compile them with 'make' and got : echo make pd_linux, pd_nt, pd_irix5, or pd_irix6 make pd_linux, pd_nt, pd_irix5, or pd_irix6 Then i try make pd_linux (?) and got : make: *** No rule to make target `obj1.pd_linux', needed by `pd_linux'. Stop. I am sure to miss something but what ? Thanx for help. ++ Jack Le mardi 13 avril 2010 à 19:11 -0700, Jaime Oliver a écrit : > hello everyone, > > > In the link below there is a video documentation of a brand new > performance with the new MANO Controller called Silent Construction 2 > in a new webpage... lots of new things... > For those who were in Sao Paulo for the PdCon you may have heard > Silent Construction 1 (for Silent Drum). As in that case everything is > done in Pd/GEM and a few new externals... > > > hope you like it...: > > > http://www.jaimeoliver.pe/workobra/silent-construction-series/sc2 > > > best, > > > J > > > > -- > Jaime E Oliver LR > > www.jaimeoliver.pe > > 858 750 0924 (cel) > 858 202 1522 (home) > 9168 Regents Rd. Apt. G > La Jolla, CA 92037 > USA > > _______________________________________________ > Pd-list@iem.at mailing list > UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list-- Jaime E Oliver LR
www.jaimeoliver.pe
858 750 0924 (cel) 858 202 1522 (home) 9168 Regents Rd. Apt. G La Jolla, CA 92037 USA
mmh,
I've never gotten that. are you in 64 bit?
the other possibility is that you have the camera driver in 640x480 and it is just too much.
what happens if you open a blank patch and create a pix_hand object?
J
On Fri, Apr 16, 2010 at 11:22 AM, Jack jack@rybn.org wrote:
Le vendredi 16 avril 2010 à 10:18 -0700, Jaime Oliver a écrit :
Hey Jack,
You need to put pix_hand.cpp and pix_hand.h (from the 07-apr-10-current folder) in the Pixes folder in Gem, and compile it like you regularly do.
Yes, it is what i did before. So i can create the [pix_hand] (with GEM 0.92-3).
about best_match, you should have a best_match.pd_linux and you can put it in the extra folder or make a path to ../externals/best_match/ Otherwise, you can get best_match.c and compile it yourself. What I do is to move the folder called best_match in extra, cd into that folder and write make best_match.pd_linux
Here was my error, i have forgotten to put a name before .pd_linux :) Now best_match.pd_linux and fill0s.pd_linux compile fine. I have created an 'externals' folder in the pd 'extra' folder and add a path : /usr/lib/pd/extra/externals in Pd. I put the both best_match.pd_linux and fill0s.pd_linux in it. So I can create objects [best_match] and [fill0s] without problem ;)
I'm you glad you're undertaking the project and any help i can give, I'll give. However, you must be aware that it is an ongoing project and it is surely not bug free!
let me know if these recommendations work...
No, i still have a problem. When i open main.pd (from /hand/track), now pd crash (i guess the crash come from the auto create GEM window at startup). Here is what i get from terminal :
pd: malloc.c:3074: sYSMALLOc: Assertion `(old_top == (((mbinptr) (((char *) &((av)->bins[((1) - 1) * 2])) - __builtin_offsetof (struct malloc_chunk, fd)))) && old_size == 0) || ((unsigned long) (old_size) >= (unsigned long)((((__builtin_offsetof (struct malloc_chunk, fd_nextsize))+((2 * (sizeof(size_t))) - 1)) & ~((2 * (sizeof(size_t))) - 1))) && ((old_top)->size & 0x1) && ((unsigned long)old_end & pagemask) == 0)' failed. pd_gui: pd process exited
I give you a simple patch wich crash Pd when i create the GEM window.
by the way, the big file you downloaded contains the sc2 piece, so you can see how i'm mapping things.
Also, I am using the ps3eye camera in linux (just 40$) at 320x240 with the driver by kaswy (there are a couple threads in the archives about it).
Yes, i also use this camera and i have to re-install the kaswy's driver because there is not a full support with the driver brings by ubuntu 9.10. Thanx for your Help. ++
Jack
best,
J
On Fri, Apr 16, 2010 at 9:46 AM, Jack jack@rybn.org wrote: Hello Jaime,
I would like to use your Mano Controller, but encounter some problems. I compile GEM with pix_hand and can create the [pix_hand] object. However, when i try to open main.pd (from /hand/track), i get in Pd console : /home/jack/Bureau/hand/track/../externals/best_match.pd_linux:/home/jack/Bureau/hand/track/../externals/best_match.pd_linux: wrong ELF class: ELFCLASS64
best_match ... couldn't create /home/jack/Bureau/hand/track/../externals/fill0s.pd_linux:/home/jack/Bureau/hand/track/../externals/fill0s.pd_linux: wrong ELF class: ELFCLASS64
fill0s 8 So i decided to compile them with 'make' and got : echo make pd_linux, pd_nt, pd_irix5, or pd_irix6 make pd_linux, pd_nt, pd_irix5, or pd_irix6 Then i try make pd_linux (?) and got : make: *** No rule to make target `obj1.pd_linux', needed by `pd_linux'. Stop. I am sure to miss something but what ? Thanx for help. ++ Jack Le mardi 13 avril 2010 à 19:11 -0700, Jaime Oliver a écrit : > hello everyone, > > > In the link below there is a video documentation of a brand new > performance with the new MANO Controller called Silent Construction 2 > in a new webpage... lots of new things... > For those who were in Sao Paulo for the PdCon you may have heard > Silent Construction 1 (for Silent Drum). As in that case everything is > done in Pd/GEM and a few new externals... > > > hope you like it...: > > >http://www.jaimeoliver.pe/workobra/silent-construction-series/sc2
> > > best, > > > J > > > > -- > Jaime E Oliver LR > > www.jaimeoliver.pe > > 858 750 0924 (cel) > 858 202 1522 (home) > 9168 Regents Rd. Apt. G > La Jolla, CA 92037 > USA > > _______________________________________________ > Pd-list@iem.at mailing list > UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list-- Jaime E Oliver LR
www.jaimeoliver.pe
858 750 0924 (cel) 858 202 1522 (home) 9168 Regents Rd. Apt. G La Jolla, CA 92037 USA
I just opened the patch you sent me and have no problems...
On Fri, Apr 16, 2010 at 11:43 AM, Jaime Oliver jaime.oliver2@gmail.comwrote:
mmh,
I've never gotten that. are you in 64 bit?
the other possibility is that you have the camera driver in 640x480 and it is just too much.
what happens if you open a blank patch and create a pix_hand object?
J
On Fri, Apr 16, 2010 at 11:22 AM, Jack jack@rybn.org wrote:
Le vendredi 16 avril 2010 à 10:18 -0700, Jaime Oliver a écrit :
Hey Jack,
You need to put pix_hand.cpp and pix_hand.h (from the 07-apr-10-current folder) in the Pixes folder in Gem, and compile it like you regularly do.
Yes, it is what i did before. So i can create the [pix_hand] (with GEM 0.92-3).
about best_match, you should have a best_match.pd_linux and you can put it in the extra folder or make a path to ../externals/best_match/ Otherwise, you can get best_match.c and compile it yourself. What I do is to move the folder called best_match in extra, cd into that folder and write make best_match.pd_linux
Here was my error, i have forgotten to put a name before .pd_linux :) Now best_match.pd_linux and fill0s.pd_linux compile fine. I have created an 'externals' folder in the pd 'extra' folder and add a path : /usr/lib/pd/extra/externals in Pd. I put the both best_match.pd_linux and fill0s.pd_linux in it. So I can create objects [best_match] and [fill0s] without problem ;)
I'm you glad you're undertaking the project and any help i can give, I'll give. However, you must be aware that it is an ongoing project and it is surely not bug free!
let me know if these recommendations work...
No, i still have a problem. When i open main.pd (from /hand/track), now pd crash (i guess the crash come from the auto create GEM window at startup). Here is what i get from terminal :
pd: malloc.c:3074: sYSMALLOc: Assertion `(old_top == (((mbinptr) (((char *) &((av)->bins[((1) - 1) * 2])) - __builtin_offsetof (struct malloc_chunk, fd)))) && old_size == 0) || ((unsigned long) (old_size) >= (unsigned long)((((__builtin_offsetof (struct malloc_chunk, fd_nextsize))+((2 * (sizeof(size_t))) - 1)) & ~((2 * (sizeof(size_t))) - 1))) && ((old_top)->size & 0x1) && ((unsigned long)old_end & pagemask) == 0)' failed. pd_gui: pd process exited
I give you a simple patch wich crash Pd when i create the GEM window.
by the way, the big file you downloaded contains the sc2 piece, so you can see how i'm mapping things.
Also, I am using the ps3eye camera in linux (just 40$) at 320x240 with the driver by kaswy (there are a couple threads in the archives about it).
Yes, i also use this camera and i have to re-install the kaswy's driver because there is not a full support with the driver brings by ubuntu 9.10. Thanx for your Help. ++
Jack
best,
J
On Fri, Apr 16, 2010 at 9:46 AM, Jack jack@rybn.org wrote: Hello Jaime,
I would like to use your Mano Controller, but encounter some problems. I compile GEM with pix_hand and can create the [pix_hand] object. However, when i try to open main.pd (from /hand/track), i get in Pd console : /home/jack/Bureau/hand/track/../externals/best_match.pd_linux:/home/jack/Bureau/hand/track/../externals/best_match.pd_linux: wrong ELF class: ELFCLASS64
best_match ... couldn't create /home/jack/Bureau/hand/track/../externals/fill0s.pd_linux:/home/jack/Bureau/hand/track/../externals/fill0s.pd_linux: wrong ELF class: ELFCLASS64
fill0s 8 So i decided to compile them with 'make' and got : echo make pd_linux, pd_nt, pd_irix5, or pd_irix6 make pd_linux, pd_nt, pd_irix5, or pd_irix6 Then i try make pd_linux (?) and got : make: *** No rule to make target `obj1.pd_linux', needed by `pd_linux'. Stop. I am sure to miss something but what ? Thanx for help. ++ Jack Le mardi 13 avril 2010 à 19:11 -0700, Jaime Oliver a écrit : > hello everyone, > > > In the link below there is a video documentation of a brand new > performance with the new MANO Controller called Silent Construction 2 > in a new webpage... lots of new things... > For those who were in Sao Paulo for the PdCon you may have heard > Silent Construction 1 (for Silent Drum). As in that case everything is > done in Pd/GEM and a few new externals... > > > hope you like it...: > > >http://www.jaimeoliver.pe/workobra/silent-construction-series/sc2
> > > best, > > > J > > > > -- > Jaime E Oliver LR > > www.jaimeoliver.pe > > 858 750 0924 (cel) > 858 202 1522 (home) > 9168 Regents Rd. Apt. G > La Jolla, CA 92037 > USA > > _______________________________________________ > Pd-list@iem.at mailing list > UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list-- Jaime E Oliver LR
www.jaimeoliver.pe
858 750 0924 (cel) 858 202 1522 (home) 9168 Regents Rd. Apt. G La Jolla, CA 92037 USA
-- Jaime E Oliver LR
www.jaimeoliver.pe
858 750 0924 (cel) 858 202 1522 (home) 9168 Regents Rd. Apt. G La Jolla, CA 92037 USA
Le vendredi 16 avril 2010 à 11:43 -0700, Jaime Oliver a écrit :
mmh,
I've never gotten that. are you in 64 bit?
No 32. Ubuntu 9.10, pd-extended 0.41.4 and GEM 0.92-3.
the other possibility is that you have the camera driver in 640x480 and it is just too much.
But i don't use any camera with the patch i sent in my previous mail, just a [gemhead] and a [pix_hand].
what happens if you open a blank patch and create a pix_hand object?
Nothing. The object is created. ++
Jack
J
On Fri, Apr 16, 2010 at 11:22 AM, Jack jack@rybn.org wrote: Le vendredi 16 avril 2010 à 10:18 -0700, Jaime Oliver a écrit : > Hey Jack, > > > You need to put pix_hand.cpp and pix_hand.h (from the > 07-apr-10-current folder) in the Pixes folder in Gem, and compile it > like you regularly do.
Yes, it is what i did before. So i can create the [pix_hand] (with GEM 0.92-3). > > > about best_match, you should have a best_match.pd_linux and you can > put it in the extra folder or make a path to ../externals/best_match/ > Otherwise, you can get best_match.c and compile it yourself. > What I do is to move the folder called best_match in extra, cd into > that folder and write make best_match.pd_linux Here was my error, i have forgotten to put a name before .pd_linux :) Now best_match.pd_linux and fill0s.pd_linux compile fine. I have created an 'externals' folder in the pd 'extra' folder and add a path : /usr/lib/pd/extra/externals in Pd. I put the both best_match.pd_linux and fill0s.pd_linux in it. So I can create objects [best_match] and [fill0s] without problem ;) > > > I'm you glad you're undertaking the project and any help i can give, > I'll give. > However, you must be aware that it is an ongoing project and it is > surely not bug free! > > > let me know if these recommendations work... No, i still have a problem. When i open main.pd (from /hand/track), now pd crash (i guess the crash come from the auto create GEM window at startup). Here is what i get from terminal : pd: malloc.c:3074: sYSMALLOc: Assertion `(old_top == (((mbinptr) (((char *) &((av)->bins[((1) - 1) * 2])) - __builtin_offsetof (struct malloc_chunk, fd)))) && old_size == 0) || ((unsigned long) (old_size) >= (unsigned long)((((__builtin_offsetof (struct malloc_chunk, fd_nextsize))+((2 * (sizeof(size_t))) - 1)) & ~((2 * (sizeof(size_t))) - 1))) && ((old_top)->size & 0x1) && ((unsigned long)old_end & pagemask) == 0)' failed. pd_gui: pd process exited I give you a simple patch wich crash Pd when i create the GEM window. > > > by the way, the big file you downloaded contains the sc2 piece, so you > can see how i'm mapping things. > > > Also, I am using the ps3eye camera in linux (just 40$) at 320x240 with > the driver by kaswy (there are a couple threads in the archives about > it). Yes, i also use this camera and i have to re-install the kaswy's driver because there is not a full support with the driver brings by ubuntu 9.10. Thanx for your Help. ++ Jack > > > best, > > > J > > On Fri, Apr 16, 2010 at 9:46 AM, Jack <jack@rybn.org> wrote: > Hello Jaime, > > I would like to use your Mano Controller, but encounter some > problems. > I compile GEM with pix_hand and can create the [pix_hand] > object. > However, when i try to open main.pd (from /hand/track), i get > in Pd > console : > > /home/jack/Bureau/hand/track/../externals/best_match.pd_linux: /home/jack/Bureau/hand/track/../externals/best_match.pd_linux: wrong ELF class: ELFCLASS64 > best_match > ... couldn't create > /home/jack/Bureau/hand/track/../externals/fill0s.pd_linux: /home/jack/Bureau/hand/track/../externals/fill0s.pd_linux: wrong ELF class: ELFCLASS64 > fill0s 8 > > So i decided to compile them with 'make' and got : > echo make pd_linux, pd_nt, pd_irix5, or pd_irix6 > make pd_linux, pd_nt, pd_irix5, or pd_irix6 > > Then i try make pd_linux (?) and got : > make: *** No rule to make target `obj1.pd_linux', needed by > `pd_linux'. > Stop. > > I am sure to miss something but what ? > Thanx for help. > ++ > > Jack > > > > Le mardi 13 avril 2010 à 19:11 -0700, Jaime Oliver a écrit : > > > hello everyone, > > > > > > In the link below there is a video documentation of a brand > new > > performance with the new MANO Controller called Silent > Construction 2 > > in a new webpage... lots of new things... > > For those who were in Sao Paulo for the PdCon you may have > heard > > Silent Construction 1 (for Silent Drum). As in that case > everything is > > done in Pd/GEM and a few new externals... > > > > > > hope you like it...: > > > > > > > http://www.jaimeoliver.pe/workobra/silent-construction-series/sc2 > > > > > > best, > > > > > > J > > > > > > > > -- > > Jaime E Oliver LR > > > > www.jaimeoliver.pe > > > > 858 750 0924 (cel) > > 858 202 1522 (home) > > 9168 Regents Rd. Apt. G > > La Jolla, CA 92037 > > USA > > > > > > _______________________________________________ > > Pd-list@iem.at mailing list > > UNSUBSCRIBE and account-management -> > http://lists.puredata.info/listinfo/pd-list > > > > > > > -- > Jaime E Oliver LR > > www.jaimeoliver.pe > > 858 750 0924 (cel) > 858 202 1522 (home) > 9168 Regents Rd. Apt. G > La Jolla, CA 92037 > USA >-- Jaime E Oliver LR
www.jaimeoliver.pe
858 750 0924 (cel) 858 202 1522 (home) 9168 Regents Rd. Apt. G La Jolla, CA 92037 USA
I have to leave right now.
I'll be connected later to tell you what gem version I am using. Are you using pd extended or vanilla? I use vanilla and gem from svn, but can't remember what version i have in my linux box.
I also know i am using 64 bit, but that shouldn't be a problem if you're compiling your own pix_hand...
J
On Fri, Apr 16, 2010 at 11:50 AM, Jack jack@rybn.org wrote:
Le vendredi 16 avril 2010 à 11:43 -0700, Jaime Oliver a écrit :
mmh,
I've never gotten that. are you in 64 bit?
No 32. Ubuntu 9.10, pd-extended 0.41.4 and GEM 0.92-3.
the other possibility is that you have the camera driver in 640x480 and it is just too much.
But i don't use any camera with the patch i sent in my previous mail, just a [gemhead] and a [pix_hand].
what happens if you open a blank patch and create a pix_hand object?
Nothing. The object is created. ++
Jack
J
On Fri, Apr 16, 2010 at 11:22 AM, Jack jack@rybn.org wrote: Le vendredi 16 avril 2010 à 10:18 -0700, Jaime Oliver a écrit : > Hey Jack, > > > You need to put pix_hand.cpp and pix_hand.h (from the > 07-apr-10-current folder) in the Pixes folder in Gem, and compile it > like you regularly do.
Yes, it is what i did before. So i can create the [pix_hand] (with GEM 0.92-3). > > > about best_match, you should have a best_match.pd_linux and you can > put it in the extra folder or make a path to ../externals/best_match/ > Otherwise, you can get best_match.c and compile it yourself. > What I do is to move the folder called best_match in extra, cd into > that folder and write make best_match.pd_linux Here was my error, i have forgotten to put a name before .pd_linux :) Now best_match.pd_linux and fill0s.pd_linux compile fine. I have created an 'externals' folder in the pd 'extra' folder and add a path : /usr/lib/pd/extra/externals in Pd. I put the both best_match.pd_linux and fill0s.pd_linux in it. So I can create objects [best_match] and [fill0s] without problem ;) > > > I'm you glad you're undertaking the project and any help i can give, > I'll give. > However, you must be aware that it is an ongoing project and it is > surely not bug free! > > > let me know if these recommendations work... No, i still have a problem. When i open main.pd (from /hand/track), now pd crash (i guess the crash come from the auto create GEM window at startup). Here is what i get from terminal : pd: malloc.c:3074: sYSMALLOc: Assertion `(old_top == (((mbinptr) (((char *) &((av)->bins[((1) - 1) * 2])) - __builtin_offsetof (struct malloc_chunk, fd)))) && old_size == 0) || ((unsigned long) (old_size) >= (unsigned long)((((__builtin_offsetof (struct malloc_chunk, fd_nextsize))+((2 * (sizeof(size_t))) - 1)) & ~((2 * (sizeof(size_t))) - 1))) && ((old_top)->size & 0x1) && ((unsigned long)old_end & pagemask) == 0)' failed. pd_gui: pd process exited I give you a simple patch wich crash Pd when i create the GEM window. > > > by the way, the big file you downloaded contains the sc2 piece, so you > can see how i'm mapping things. > > > Also, I am using the ps3eye camera in linux (just 40$) at 320x240 with > the driver by kaswy (there are a couple threads in the archives about > it). Yes, i also use this camera and i have to re-install the kaswy's driver because there is not a full support with the driver brings by ubuntu 9.10. Thanx for your Help. ++ Jack > > > best, > > > J > > On Fri, Apr 16, 2010 at 9:46 AM, Jack <jack@rybn.org> wrote: > Hello Jaime, > > I would like to use your Mano Controller, but encounter some > problems. > I compile GEM with pix_hand and can create the [pix_hand] > object. > However, when i try to open main.pd (from /hand/track), i get > in Pd > console : > > /home/jack/Bureau/hand/track/../externals/best_match.pd_linux:/home/jack/Bureau/hand/track/../externals/best_match.pd_linux: wrong ELF class: ELFCLASS64
> best_match > ... couldn't create > /home/jack/Bureau/hand/track/../externals/fill0s.pd_linux:/home/jack/Bureau/hand/track/../externals/fill0s.pd_linux: wrong ELF class: ELFCLASS64
> fill0s 8 > > So i decided to compile them with 'make' and got : > echo make pd_linux, pd_nt, pd_irix5, or pd_irix6 > make pd_linux, pd_nt, pd_irix5, or pd_irix6 > > Then i try make pd_linux (?) and got : > make: *** No rule to make target `obj1.pd_linux', needed by > `pd_linux'. > Stop. > > I am sure to miss something but what ? > Thanx for help. > ++ > > Jack > > > > Le mardi 13 avril 2010 à 19:11 -0700, Jaime Oliver a écrit : > > > hello everyone, > > > > > > In the link below there is a video documentation of a brand > new > > performance with the new MANO Controller called Silent > Construction 2 > > in a new webpage... lots of new things... > > For those who were in Sao Paulo for the PdCon you may have > heard > > Silent Construction 1 (for Silent Drum). As in that case > everything is > > done in Pd/GEM and a few new externals... > > > > > > hope you like it...: > > > > > > >http://www.jaimeoliver.pe/workobra/silent-construction-series/sc2
> > > > > > best, > > > > > > J > > > > > > > > -- > > Jaime E Oliver LR > > > > www.jaimeoliver.pe > > > > 858 750 0924 (cel) > > 858 202 1522 (home) > > 9168 Regents Rd. Apt. G > > La Jolla, CA 92037 > > USA > > > > > > _______________________________________________ > > Pd-list@iem.at mailing list > > UNSUBSCRIBE and account-management -> > http://lists.puredata.info/listinfo/pd-list > > > > > > > -- > Jaime E Oliver LR > > www.jaimeoliver.pe > > 858 750 0924 (cel) > 858 202 1522 (home) > 9168 Regents Rd. Apt. G > La Jolla, CA 92037 > USA >-- Jaime E Oliver LR
www.jaimeoliver.pe
858 750 0924 (cel) 858 202 1522 (home) 9168 Regents Rd. Apt. G La Jolla, CA 92037 USA
Le vendredi 16 avril 2010 à 11:59 -0700, Jaime Oliver a écrit :
I have to leave right now.
OK.
I'll be connected later to tell you what gem version I am using. Are you using pd extended or vanilla? I use vanilla and gem from svn, but can't remember what version i have in my linux box.
Pd-extended 0.41.4 and GEM 0.92-3.
I also know i am using 64 bit, but that shouldn't be a problem if you're compiling your own pix_hand...
I have re-compiled and always the same crash with my previous patch (after the creation of the GEM window). Anyway, thanx for your help. ++
Jack
J
On Fri, Apr 16, 2010 at 11:50 AM, Jack jack@rybn.org wrote: Le vendredi 16 avril 2010 à 11:43 -0700, Jaime Oliver a écrit : > mmh, > > > I've never gotten that. > are you in 64 bit?
No 32. Ubuntu 9.10, pd-extended 0.41.4 and GEM 0.92-3. > > > the other possibility is that you have the camera driver in 640x480 > and it is just too much. But i don't use any camera with the patch i sent in my previous mail, just a [gemhead] and a [pix_hand]. > > > what happens if you open a blank patch and create a pix_hand object? Nothing. The object is created. ++ Jack > > > J > > On Fri, Apr 16, 2010 at 11:22 AM, Jack <jack@rybn.org> wrote: > Le vendredi 16 avril 2010 à 10:18 -0700, Jaime Oliver a > écrit : > > Hey Jack, > > > > > > You need to put pix_hand.cpp and pix_hand.h (from the > > 07-apr-10-current folder) in the Pixes folder in Gem, and > compile it > > like you regularly do. > > Yes, it is what i did before. So i can create the [pix_hand] > (with GEM > 0.92-3). > > > > > > about best_match, you should have a best_match.pd_linux and > you can > > put it in the extra folder or make a path > to ../externals/best_match/ > > Otherwise, you can get best_match.c and compile it yourself. > > What I do is to move the folder called best_match in extra, > cd into > > that folder and write make best_match.pd_linux > > Here was my error, i have forgotten to put a name > before .pd_linux :) > Now best_match.pd_linux and fill0s.pd_linux compile fine. > I have created an 'externals' folder in the pd 'extra' folder > and add a > path : /usr/lib/pd/extra/externals in Pd. > I put the both best_match.pd_linux and fill0s.pd_linux in it. > So I can create objects [best_match] and [fill0s] without > problem ;) > > > > > > I'm you glad you're undertaking the project and any help i > can give, > > I'll give. > > However, you must be aware that it is an ongoing project and > it is > > surely not bug free! > > > > > > let me know if these recommendations work... > > No, i still have a problem. > When i open main.pd (from /hand/track), now pd crash (i guess > the crash > come from the auto create GEM window at startup). > Here is what i get from terminal : > > pd: malloc.c:3074: sYSMALLOc: Assertion `(old_top == > (((mbinptr) (((char > *) &((av)->bins[((1) - 1) * 2])) - __builtin_offsetof (struct > malloc_chunk, fd)))) && old_size == 0) || ((unsigned long) > (old_size) >= > (unsigned long)((((__builtin_offsetof (struct malloc_chunk, > fd_nextsize))+((2 * (sizeof(size_t))) - 1)) & ~((2 * > (sizeof(size_t))) - > 1))) && ((old_top)->size & 0x1) && ((unsigned long)old_end & > pagemask) > == 0)' failed. > pd_gui: pd process exited > > I give you a simple patch wich crash Pd when i create the GEM > window. > > > > > > > by the way, the big file you downloaded contains the sc2 > piece, so you > > can see how i'm mapping things. > > > > > > Also, I am using the ps3eye camera in linux (just 40$) at > 320x240 with > > the driver by kaswy (there are a couple threads in the > archives about > > it). > > Yes, i also use this camera and i have to re-install the > kaswy's driver > because there is not a full support with the driver brings by > ubuntu > 9.10. > Thanx for your Help. > ++ > > Jack > > > > > > > > > best, > > > > > > J > > > > On Fri, Apr 16, 2010 at 9:46 AM, Jack <jack@rybn.org> wrote: > > Hello Jaime, > > > > I would like to use your Mano Controller, but > encounter some > > problems. > > I compile GEM with pix_hand and can create the > [pix_hand] > > object. > > However, when i try to open main.pd > (from /hand/track), i get > > in Pd > > console : > > > > > /home/jack/Bureau/hand/track/../externals/best_match.pd_linux: /home/jack/Bureau/hand/track/../externals/best_match.pd_linux: wrong ELF class: ELFCLASS64 > > best_match > > ... couldn't create > > > /home/jack/Bureau/hand/track/../externals/fill0s.pd_linux: /home/jack/Bureau/hand/track/../externals/fill0s.pd_linux: wrong ELF class: ELFCLASS64 > > fill0s 8 > > > > So i decided to compile them with 'make' and got : > > echo make pd_linux, pd_nt, pd_irix5, or pd_irix6 > > make pd_linux, pd_nt, pd_irix5, or pd_irix6 > > > > Then i try make pd_linux (?) and got : > > make: *** No rule to make target `obj1.pd_linux', > needed by > > `pd_linux'. > > Stop. > > > > I am sure to miss something but what ? > > Thanx for help. > > ++ > > > > Jack > > > > > > > > Le mardi 13 avril 2010 à 19:11 -0700, Jaime Oliver a > écrit : > > > > > hello everyone, > > > > > > > > > In the link below there is a video documentation > of a brand > > new > > > performance with the new MANO Controller called > Silent > > Construction 2 > > > in a new webpage... lots of new things... > > > For those who were in Sao Paulo for the PdCon you > may have > > heard > > > Silent Construction 1 (for Silent Drum). As in > that case > > everything is > > > done in Pd/GEM and a few new externals... > > > > > > > > > hope you like it...: > > > > > > > > > > > > http://www.jaimeoliver.pe/workobra/silent-construction-series/sc2 > > > > > > > > > best, > > > > > > > > > J > > > > > > > > > > > > -- > > > Jaime E Oliver LR > > > > > > www.jaimeoliver.pe > > > > > > 858 750 0924 (cel) > > > 858 202 1522 (home) > > > 9168 Regents Rd. Apt. G > > > La Jolla, CA 92037 > > > USA > > > > > > > > > > _______________________________________________ > > > Pd-list@iem.at mailing list > > > UNSUBSCRIBE and account-management -> > > http://lists.puredata.info/listinfo/pd-list > > > > > > > > > > > > > > -- > > Jaime E Oliver LR > > > > www.jaimeoliver.pe > > > > 858 750 0924 (cel) > > 858 202 1522 (home) > > 9168 Regents Rd. Apt. G > > La Jolla, CA 92037 > > USA > > > > > > > > -- > Jaime E Oliver LR > > www.jaimeoliver.pe > > 858 750 0924 (cel) > 858 202 1522 (home) > 9168 Regents Rd. Apt. G > La Jolla, CA 92037 > USA >-- Jaime E Oliver LR
www.jaimeoliver.pe
858 750 0924 (cel) 858 202 1522 (home) 9168 Regents Rd. Apt. G La Jolla, CA 92037 USA
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
Jack wrote:
Le vendredi 16 avril 2010 à 10:18 -0700, Jaime Oliver a écrit :
Hey Jack,
You need to put pix_hand.cpp and pix_hand.h (from the 07-apr-10-current folder) in the Pixes folder in Gem, and compile it like you regularly do.
Yes, it is what i did before. So i can create the [pix_hand] (with GEM 0.92-3).
i assume that Gem does not crash (without [pix_hand])
gmasdr IOhannes
-
Andrew Faraday -
Hans-Christoph Steiner -
IOhannes m zmölnig -
Jack -
Jaime Oliver