Hi all,
[comport] has just been enhanced with a few features that may be useful to know about. It's available on Deken as version 1.3.
Most of these additions are designed to facilitate the use of USB serial devices (e.g Arduino).
The new features allow to:
extend the valid baudrates to those allowed by the OS, up to 4MBds.
disable auto-opening the serial device at startup: [comport -1]
won't try to open anything.
- enumerate only USB devices (this avoids trying to open problematic
devices, such as bluetooth related ones) using [ports usb( and [devices usb(.
- "lock" the opened device, preventing other [comport]s from opening
it (other [comport]s must also use locking for this to work). Just send [lock 1( before opening.
Plus, the help patch has been rewritten to be more readable.
Hope it can be useful to someone (other than me;-)
Antoine
Pd-announce mailing list -- pd-announce@lists.iem.at To unsubscribe send an email to pd-announce-leave@lists.iem.at
Hi Antoine,
Overall these are great enhancements!
One questions below:
On 25 Oct 2024, at 10:37, Antoine Rousseau antoine@metalu.net wrote:
Hi all,
[comport] has just been enhanced with a few features that may be useful to know about. It's available on Deken as version 1.3.
Most of these additions are designed to facilitate the use of USB serial devices (e.g Arduino).
The new features allow to:
extend the valid baudrates to those allowed by the OS, up to 4MBds.
disable auto-opening the serial device at startup: [comport -1]
won't try to open anything.
- enumerate only USB devices (this avoids trying to open problematic
devices, such as bluetooth related ones) using [ports usb( and [devices usb(.
Would it still be possible to use Arduino bluetooth communication? It would be a pity if this becomes impossible.
- "lock" the opened device, preventing other [comport]s from opening
it (other [comport]s must also use locking for this to work). Just send [lock 1( before opening.
Plus, the help patch has been rewritten to be more readable.
Hope it can be useful to someone (other than me;-)
Antoine
Best!
Edwin
Pd-announce mailing list -- pd-announce@lists.iem.at To unsubscribe send an email to pd-announce-leave@lists.iem.at
pd-list@lists.iem.at - the Pure Data mailinglist https://lists.iem.at/hyperkitty/list/pd-list@lists.iem.at/message/AY24EBWXCG...
To unsubscribe send an email to pd-list-leave@lists.iem.at mailing list UNSUBSCRIBE and account-management -> https://lists.iem.at/
Hi Edwin,
Would it still be possible to use Arduino bluetooth
of course! [ports( and [devices( still work normally (i.e enumerate all devices). Generally comport should behave exactly as before, if you don't use the new messages.
Antoine
Le ven. 25 oct. 2024 à 11:01, Edwin van der Heide pd@evdh.net a écrit :
Hi Antoine,
Overall these are great enhancements!
One questions below:
On 25 Oct 2024, at 10:37, Antoine Rousseau antoine@metalu.net wrote:
Hi all,
[comport] has just been enhanced with a few features that may be useful to know about. It's available on Deken as version 1.3.
Most of these additions are designed to facilitate the use of USB serial devices (e.g Arduino).
The new features allow to:
extend the valid baudrates to those allowed by the OS, up to 4MBds.
disable auto-opening the serial device at startup: [comport -1]
won't try to open anything.
- enumerate only USB devices (this avoids trying to open problematic
devices, such as bluetooth related ones) using [ports usb( and [devices usb(.
Would it still be possible to use Arduino bluetooth communication? It would be a pity if this becomes impossible.
- "lock" the opened device, preventing other [comport]s from opening
it (other [comport]s must also use locking for this to work). Just send [lock 1( before opening.
Plus, the help patch has been rewritten to be more readable.
Hope it can be useful to someone (other than me;-)
Antoine
Best!
Edwin
Pd-announce mailing list -- pd-announce@lists.iem.at To unsubscribe send an email to pd-announce-leave@lists.iem.at
pd-list@lists.iem.at - the Pure Data mailinglist https://lists.iem.at/hyperkitty/list/pd-list@lists.iem.at/message/AY24EBWXCG...
To unsubscribe send an email to pd-list-leave@lists.iem.at mailing list UNSUBSCRIBE and account-management -> https://lists.iem.at/
pd-list@lists.iem.at - the Pure Data mailinglist https://lists.iem.at/hyperkitty/list/pd-list@lists.iem.at/message/LAIBRGTTFS...
To unsubscribe send an email to pd-list-leave@lists.iem.at mailing list UNSUBSCRIBE and account-management -> https://lists.iem.at/
On Fri, 2024-10-25 at 10:37 +0200, Antoine Rousseau wrote:
[comport] has just been enhanced with a few features that may be useful to know about. It's available on Deken as version 1.3.
Cool! It's nice to see [comport] being taken care of. Sounds like very useful improvements. Thanks for your efforts!
Roman
thanks Antoine,
disable auto-opening the serial device at startup: [comport -1] won't try to open anything.
i appreciate this option very much, having many [comport]'s in one patch, which, until now, are cluttering the Pd-console with error-messages at start-up.
rolf
Antoine Rousseau schreef op 25-10-2024 10:37:
Hi all,
[comport] has just been enhanced with a few features that may be useful to know about. It's available on Deken as version 1.3.
Most of these additions are designed to facilitate the use of USB serial devices (e.g Arduino).
The new features allow to:
extend the valid baudrates to those allowed by the OS, up to 4MBds.
disable auto-opening the serial device at startup: [comport -1]
won't try to open anything.
- enumerate only USB devices (this avoids trying to open problematic
devices, such as bluetooth related ones) using [ports usb( and [devices usb(.
- "lock" the opened device, preventing other [comport]s from opening
it (other [comport]s must also use locking for this to work). Just send [lock 1( before opening.
Plus, the help patch has been rewritten to be more readable.
Hope it can be useful to someone (other than me;-)
Antoine
Pd-announce mailing list -- pd-announce@lists.iem.at To unsubscribe send an email to pd-announce-leave@lists.iem.at
pd-list@lists.iem.at - the Pure Data mailinglist https://lists.iem.at/hyperkitty/list/pd-list@lists.iem.at/message/AY24EBWXCG...
To unsubscribe send an email to pd-list-leave@lists.iem.at mailing list UNSUBSCRIBE and account-management -> https://lists.iem.at/
-
Antoine Rousseau -
Edwin van der Heide -
reduzent＠gmail.com -
rolfm＠dds.nl