Hi, Yes, I think IOhannes is right. It should be better to have a function. But we can also keep the old variable for back compatibility. In fact, if I'm the only one who use this variable, that won't be a problem anymore, I now use the sources from pd 0.46.
Here a suggestion to solve the problem : https://sourceforge.net/p/pure-data/patches/530/
Cheers
Hi,
On my rpi with pd 0.46-1 I cannot use -rt: /home/pi/pd-0.46-1/bin# ./pd -rt -alsa -nogui priority 96 scheduling failed; running at normal priority priority 98 scheduling failed.
With pd 0.46.0 all is good: /home/pi/pd-0.46-0/bin# ./pd -rt -alsa -nogui priority 96 scheduling enabled. priority 98 scheduling enabled.
Cheers~
this is what I did to get it to compile, had some errors with Jack at first, I might have compiled actually with portaudio on the most freshest install.
sudo apt-get build-dep puredata ./autogen.sh ./configure --disable-portaudio --enable-jack sudo make install
Done some recording with my desktop server. The soundcard in it is an Creative Audigy2 Platinum. The audio does not glitch with pd but the soundcard has a bad capacitor or something in it. I can touch the pins of a few different caps around C100 on the board and the background IR Radiation sounding like sizzling sound stops. Have soldering iron now so am searching for parts to replace. At aNy rate here is a recording with the fresh pd. thanks! and Enjoy https://archive.org/details/centaur-sh-mandelbox
-
Billy Stiltner -
Pierre Guillot -
puredata＠11h11.com