Pd-list March 2004

pd-list@lists.iem.at

158 participants
381 discussions

Re: [PD] Still with the GEM!
by thewade 12 Mar '04

12 Mar '04

IOhannes hast gesagt > hmm. > sorry for not answering any sooner. No problem, thanks for the help, though this will confuse you... > glut is not openGL (but depends on it); you don\'t really need glut for > getting Gem to run (unless you are in desparate need for the [teapot]) I know that their different packages, but I figured that sence glut runs on GL that glut would install GL as well... Bad assumption. It turns out that xfree86 comes with its own gl drivers. Perhaps I overwrote or failed to verwrite these drivers. > personally i am using the debian-packages to install xlibmesa3-gl > xlibmesa-gl-dev (and *-glu*). Supposedly I have Mesa 6.0 built and installed as per the install readme that comes with mesa. This makes a libOSMesa.so, but no libMesaGL.so. Ive tried ln to make a soft link from libMesaGL to libOSMesa to no avail. Im using fedora core 1.9 (2) and linux 2.6.3 general kernel I guess (i got it form kernel.org), on a ati rage 128 using dell inspiron 8000 laptop, with a hammerfall dsp multiface pcmcia card that doesnt work with pd for some reason. Im generally building stuff from scratch, but sometimes I use synaptic (no Mesa libraries there though... Planet ccrma with apt) > so let us start from scratch Yes, thank you! > simply do \"export LIBS=-L/path/to/my/libraries/that/cannot/be/found\" > prior to running configure. > \"export\" is bash-specific, you might have to use something different for > your shell. configure still dies... > thus the following file \"gltest.c\" compile on your system > <code> > char glInitNames(); > int main() { > glInitNames(); > return 0; > } > </code> > compile it with \"gcc gltest.c -lGL\" This compiles to a.out with no complaint! How come this file compiles, but the configure script dies? > eventually, try to install the libraries to some place that is searched > for sure (e.g. /usr/local/lib/), > either with a \"make install\" (if this works) or by soft-linking the *.so > files there. This is where they are! libGL.so and libOSMesa.so > hope this will help a bit. It does! Thank you so much! Dont give up yet though... Is there some way to verify that the configure script is doing the right thing? -thewade

3 2

Re: [PD] wishlist
by Joseph A. Sarlo 12 Mar '04

12 Mar '04

I have a version of this that is almost ready for release (I'm just dealing with vsti parameter/sysex weirdness.) I'm pretty bogged down with my classes right now, but this quarter ends next week, so I'll probably release it the week after. Joe jsarlo(a)ucsd.edu > >pdvst: >i'm a quite intensive user of pdvst, the tool developed by joseph sarlo. >Maybe jsarlo would develop a pdVSTi version if enough people are interested. >For me it would open a wide range of possibilities. > >Roman

1 0

37-1 hradio new&old broken?
by t.barrass＠pgrad.unimelb.edu.au 12 Mar '04

12 Mar '04

Is vradio and hradio buttons "new&old" property working for anyone else in pd 0.37-1? I can only get "new only" to work. Tim

1 0

PureData Montréal #3 (fwd)
by Mathieu Bouchard 12 Mar '04

12 Mar '04

---------- Forwarded message ---------- Date: Thu, 11 Mar 2004 20:16:47 -0500 (EST) From: Mathieu Bouchard <matju(a)sympatico.ca> To: [...] Subject: PureData Montréal #3 PureData Montréal Users Group meeting #3 Saturday March 13th, 2004, 12:00 - 17:00 EST Société des Arts Technologiques (www.SAT.qc.ca) 1195 StLaurent (métro StLaurent ou PlaceD'Armes) Admission: 0$ (zero); you need _not_ reserve your seat this time Language: mélange de english and of français L'ordre of the présentations may change sans previous notice. =) PROGRAMME 1. MICHAL SETA (NoOneReceiving, Unisexe) Delay Lines Using [delread~]/[delwrite~] Tutorial about how to make delay-line effects such as echo, phaser, chorus and reverb. 2. STÉPHANIE BRODEUR (Ottawa U) Synesthésie An interactive art project about converting pictures to sound. 3. MATHIEU BOUCHARD (Artengine) Impurity Ugliness is next to godliness, so here's how to go straight to hell. Let's talk about "gooey" things. Let's make our patches more organic. 4. ZACK SETTEL (SAT) nSlam / pdjimmies This multichannel audio system was developed at SAT's research labs and released last month, as seen on pd-list. 5. ALEXANDRE CASTONGUAY (Artengine, Ottawa U, Concordia U) Arts' Birthday Je présenterai les oeuvres réalisées pour le «arts birthday», un événement organisé par le Western Front le 17 janvier dernier. L'anniversaire de l'art a été proposé par l'artiste fluxus Robert Filliou en 1963. La version du Western Front réunissait des centres et des collectifs d'artistes de plusieurs continents pour un événement d'envoi et de réception de données. 6. MATHIEU BOUCHARD (Artengine) Polymorphism and Dimensionality: Two Wonderful Buzzwords GridFlow's own kind of reuse is about making effects that behave contextually to the kind of data they are used with, but without doing anything special to get there. GridFlow is designed to be used in ways it was not intended to be used for. ________________________________________________________________ Mathieu Bouchard http://artengine.ca/matju

1 0

VBAP crash in OSX 10.3 panther
by zack 12 Mar '04

12 Mar '04

From what I can tell from my stack dump below, vbap seems to be crashing Has anyone else had this problem (running pd.37-1 / OSX 10.3.2) ? Any more sources more recent than mine (source for pd dated nov. 26 2002) ? ??? -zack #0 0x048a5d74 in additive_vbap () #1 0x048a64c4 in spread_it () #2 0x048a669c in vbap_bang () #3 0x00033348 in outlet_bang (x=0xae00004) at m_obj.c:323 #4 0x00052910 in trigger_list (x=0x4d34540, s=0x3e800000, argc=1, argv=0xbffff8f0) at x_connective.c:986 #5 0x00052acc in trigger_float (x=0x7f8000, f=1.00000036) at x_connective.c:1030 #6 0x00033440 in outlet_float (x=0xae00004, f=-3715.15601) at m_obj.c:355 #7 0x00033440 in outlet_float (x=0xae00004, f=-3715.15601) at m_obj.c:355 #8 0x00033440 in outlet_float (x=0xae00004, f=-3715.15601) at m_obj.c:355 #9 0x00033440 in outlet_float (x=0xae00004, f=-3715.15601) at m_obj.c:355 #10 0x00033348 in outlet_bang (x=0xae00004) at m_obj.c:323 #11 0x00057a24 in metro_tick (x=0x4d353c0) at x_time.c:87 #12 0x00038704 in sched_tick (next_sys_time=-3715.156005859375) at m_sched.c:357 #13 0x000389c8 in m_scheduler () at m_sched.c:448 #14 0x000021cc in _start (argc=-1073743632, argv=0x4d36aa0, envp=0x1388) at /SourceCache/Csu/Csu-47/crt.c:267 #15 0x8fe1a700 in __dyld__dyld_start ()

1 0

Creating signal patches by messages
by Peter Lundén 11 Mar '04

11 Mar '04

I have problems creating signal patches by message. I attached a patch with problematic behavior. First i put DSP on. Then open the bug-patch.pd and click on the message box and open the newly created bug-patch, now there is no output from noise~ . If you now force a recomputation of the computation graph there it an output. I consider this as a bug but it migth be a "feature". How could I fix this problem? Best regards --PLu --------------------------------------- Peter Lunden The Interactive Institute Box 24 081 SE-104 50 STOCKHOLM, Sweden Phone: +46-8-783 24 59 Cell: +46-70-845 53 03 ICQ: 253544648 #N canvas 548 166 460 310 10; #X msg 163 56 \; pd-bug-patch.pd obj 10 10 bug-patch; #X obj 46 163 noise~; #X obj 47 185 env~; #X floatatom 47 207 5 0 0 0 - - -; #X connect 1 0 2 0; #X connect 2 0 3 0;

6 13

flext (or lack of it) update..
by chris tyrrell 11 Mar '04

11 Mar '04

so i suppose this mostly goes out to mr. grill, well anyway i have sort of figured out the command line aspects of pd but i still havent compiled flext, basically i just wanted to know what you mean by "edit config-pd-bcc.txt, run build-pd-bcc.bat", like i understand the whole running the .bat but what is the relavence of the text file? does it provide information for the compiling process, also im not 100% sure how to edit it, obviously i have to change the configuration to suit my computer but im not sure about the syntax, i know from the whole command line thing that getting the syntax right is very important...well im sorry for all this whining (im sick of newbie whining already and im just a newbie too) but i do seem to need some help. thanks ===== ___________________________________________________________ Yahoo! Messenger - Communicate instantly..."Ping" your friends today! Download Messenger Now http://uk.messenger.yahoo.com/download/index.html

2 2

physical modeling for pd (pmpd)
by cyrille henry 11 Mar '04

11 Mar '04

hello, I've made a lot's of change to the physical modeling object for pure data. there is a lot's of diferences since first version. (complettly incompatible, but lot's more powerfull now) you can find everything there : http://drpichon.free.fr/pmpd/ there is a documentation, help files, exemples, sources and binary for win32/linux/osX. most of the examples need a recent version of gem. (don't forget to put a -lib pmpd to try it). hope you'll like it... feedback is wellcome, cyrille

1 0

Re: [PD-announce] installaition help
by B. Bogart 11 Mar '04

11 Mar '04

Hi Jon, Try Hans-Christophe's OSX installer: http://pure-data.iem.at/Members/hans/Pure%20Data%20Installer%200.37-2003.10… Ben jon(a)it-snedkeren.dk wrote: >hi all. > >to start with, i have just switched from pc to mac (g4, 0sx 10.2). >so, i don't have total control of it yet. i have tried pd on pc - and i'm >really hooked - but i'm having problems insalling it. first of all when i >download the newest version for osx/linux, there is no files in the bin >folder - is this normal? >i then tryed to download a older version for mac osx only - and that >worked out fine (with files in the bin folder...), after that i found out >that i should get tcl/tk installed, and i did (tcl/tk auqua 8. something). >after that, after that i thought every thing had worked out... but nothing >happens when i try to get it installed. i then tryed to open wish, and >tryed the best i could to get them to work together - but nothing happend >- as you can see i'm new to this, i could sure use some help. > >thanks in advance > >-jon > > > >_______________________________________________ >PD-announce mailing list >PD-announce(a)iem.at >http://iem.at/cgi-bin/mailman/listinfo/pd-announce > > >

1 0

Mp3write~
by Jorge Cardoso 11 Mar '04

11 Mar '04

Hi there, Does anyone know what happened to the mp3write~ windows port? I came across this link http://www.akustische-kunst.org/puredata/winport/winport.html but it seems to be broken... jc --- Jorge Cardoso <-> jorgecardoso(a)ieee.org Centro de Investigação em Ciência e Tecnologia das Artes (CITAR) Univ. Católica Portuguesa Centro Regional do Porto Rua Diogo Botelho 1327 4169 - 005 Porto Portugal Tel: 226196200 Ext: 133 "Whether you believe you can, or whether you believe you can't, you're absolutely right." - Henry Ford

1 0

← Newer
1
...
25
26
27
28
29
30
31
...
39
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

Pd-list March 2004