Pd-list January 2002

pd-list@lists.iem.at

83 participants
162 discussions

buzz opcode
by Frank Barknecht 28 Jan '02

28 Jan '02

Hi, does anyone know of an external or abstraction that behaves like the buzz and gbuzz opcodes in Csound? If you don't know [g]buzz, they output a set of harmonically related [co]sine partials. I tried simulating this with sinesum arrays and tabosc, but the interesting part in buzz is, that one can change the amplitudes of the partials at control rate. But changing the array while running the wavetable oscillator in PD is not an option, as it gives nasty glitches. Thanks for any pointers, -- __ __ Frank Barknecht ____ ______ ____ __ trip\ \ / /wire ______ / __// __ /__/ __// // __ \ \/ / __ \\ ___\ / / / ____/ / / / // ____// /\ \\ ___\\____ \ /_/ /_____/ /_/ /_//_____// / \ \\_____\\_____\ /_/ \_\

4 8

RE: [PD] A question or two and a PD related (music) release
by mark 28 Jan '02

28 Jan '02

Hi, I am making a VC makefile for this - I am currently stuck on the error: openpatch.c(54) : warning C4013: 'glob_evalfile' undefined; assuming extern returning int where can I find this function?? cheers mark > -----Original Message----- > From: CK [mailto:x@meta.lo-res.org] > Sent: 28 January 2002 14:06 > To: mark(a)junklight.com > Cc: 'marius schebella'; pd-list(a)iem.kug.ac.at > Subject: Re: [PD] A question or two and a PD related (music) release > > > I read: > > Ah thats just what I am after -cheers > > there is a wavinfo object in ext13 (http://pd.klingt.org/files/) > > works only for wav files though. > > hope that helps, > > (length is still nrofframes/nrofchannels/srate) > > cheers > > x > > -- > chris(a)lo-res.org Postmodernism is german romanticism with better > http://pilot.fm/ special effects. (Jeff Keuss / via ctheory.com) >

1 0

RE: [PD] A question or two and a PD related (music) release
by mark 28 Jan '02

28 Jan '02

Hi, just before I try building them - will these work under windows or are they linux only? mark > -----Original Message----- > From: CK [mailto:x@meta.lo-res.org] > Sent: 28 January 2002 14:06 > To: mark(a)junklight.com > Cc: 'marius schebella'; pd-list(a)iem.kug.ac.at > Subject: Re: [PD] A question or two and a PD related (music) release > > > I read: > > Ah thats just what I am after -cheers > > there is a wavinfo object in ext13 (http://pd.klingt.org/files/) > > works only for wav files though. > > hope that helps, > > (length is still nrofframes/nrofchannels/srate) > > cheers > > x > > -- > chris(a)lo-res.org Postmodernism is german romanticism with better > http://pilot.fm/ special effects. (Jeff Keuss / via ctheory.com) >

1 0

RE: [PD] A question or two and a PD related (music) release
by mark 28 Jan '02

28 Jan '02

Ah thats just what I am after -cheers > -----Original Message----- > From: marius schebella [mailto:marius.schebella@chello.at] > Sent: 28 January 2002 11:14 > To: pd-list(a)iem.kug.ac.at > Subject: Re: [PD] A question or two and a PD related (music) release > > > hi > yes, connect a number box to the outlet of the soundfiler - > and everytime > you load a sample you will get the number of samples. > the samplerate is shown by the object "samplerate~" when you > send a bang to > it. the time in seconds is samples devided by samplerate. > (for example 44100 > samples is one second). > rightklick with the mouse on an object and a help-patch will appear... > marius. > > ----- Original Message ----- > From: "mark" <mark(a)junklight.com> > To: <pd-list(a)iem.kug.ac.at> > Sent: Monday, January 28, 2002 11:59 AM > Subject: [PD] A question or two and a PD related (music) release > > > > Hi, > > > > When I read in a file using soundfiler is there anyway of finding > > out either the sample rate of the sample or the length in > milliseconds > > of the sample? > > > > Are there any spatial positioning plugins for PD - ambisonics or the > > like? > > > > cheers > > > > mark > > > > > > > > oh - you might be vaguely interested in this (web) release I put out > > over the weekend - its almost entirely made with PD: > > > > > http://www.junklight.com/january02/madeoutofmusic/madeoutofmusic.html > > > > > > _______________________________________________ > > junklight - dark experimental electronics > > http://www/junklight.com > > > > > >

2 1

buzz~ external 0.2
by Frank Barknecht 28 Jan '02

28 Jan '02

Hi all, I did write my first external for PD, ta-dah. Well, in fact, most of it is a verbatim copy of Miller's phasor~ code, which I didn't even fully understand. Nevertheless, here's the buzz~ opcode as discussed earlier, now in C. This leads to greatly improved performance compared to the clumsy fexpr~ implementation posted here before. Still I'm sure, one could make buzz a lot faster, as my code has no optimizations at all. Normally I'm more this Perl-Python-Web type of coder and I don't have any experience with C, so I would highly appreciate any comments, tips and tricks. I have no idea and I can't check, if buzz~ would compile on Windows, but a linux makefile is included. Greetings, -- __ __ Frank Barknecht ____ ______ ____ __ trip\ \ / /wire ______ / __// __ /__/ __// // __ \ \/ / __ \\ ___\ / / / ____/ / / / // ____// /\ \\ ___\\____ \ /_/ /_____/ /_/ /_//_____// / \ \\_____\\_____\ /_/ \_\

1 1

Re: [PD] Multiple notes from "notein"
by marius schebella 28 Jan '02

28 Jan '02

hi, notein actually shows you all incoming midi messages, but very shortly one after the other if you want to separate the "voices", u can use the "poly"-object, which assigns every key a number. then "pack 0 0 0" and then "route 1 2 3 4 5 ...". you will get a list of two numbers at each of the route-outlets. they are pitch and volume (1-127). marius. ----- Original Message ----- From: Marcus Flanagan To: mark(a)junklight.com ; marius.schebella(a)chello.at ; pd-list(a)iem.kug.ac.at Sent: Monday, January 28, 2002 1:38 PM Subject: [PD] Multiple notes from "notein" How can I get the multiple notes coming in from "notein"? At the moment, I have a number box connected to "notein"...but this only shows one number....how do I get all the values of a chord pressed? ------------------------------------------------------------------------------ MSN Photos is the easiest way to share and print your photos: Click Here

1 0

Max/Msp Dev kit - help file - have you got it?
by mark 28 Jan '02

28 Jan '02

Hello, I am trying to get the documentation out of the Max/Msp SDK - however when I download the .sit to my PC and open it with stuffit expander I get an odd error and it fails to open. Has anyone got the pdf file and could they email it directly to me please ( mailto:mark@junklight.com). cheers mark

1 0

Reverb Generators
by Rory Walsh 28 Jan '02

28 Jan '02

I just thought I would post these for anyone interested in using them, it includes an allpass filter, a comb filter, a schroeder reverb unit, and a variable delay line object, although decrementing it in real time will give you clicks. Any feedback is appreciated! Regards, Rory. __________________________________________________ Do You Yahoo!? Everything you'll ever need on one web page from News and Sport to Email and Music Charts http://uk.my.yahoo.com

1 0

A question or two and a PD related (music) release
by mark 28 Jan '02

28 Jan '02

Hi, When I read in a file using soundfiler is there anyway of finding out either the sample rate of the sample or the length in milliseconds of the sample? Are there any spatial positioning plugins for PD - ambisonics or the like? cheers mark oh - you might be vaguely interested in this (web) release I put out over the weekend - its almost entirely made with PD: http://www.junklight.com/january02/madeoutofmusic/madeoutofmusic.html _______________________________________________ junklight - dark experimental electronics http://www/junklight.com

2 2

problems printing pd patches
by Rob Canning 28 Jan '02

28 Jan '02

Hi, I'm running PD on windows 98. When I go to File and then Print nothing happens. Any ideas why it won't work.? (all other software prints without problems). Do I have to tell PD where my printer is with a command line or something? Thanks to everyone developing PD - I'm just starting to get into it now. Really enjoying it! Thanks, Rob ~~~~~~~~~~~~~~~~~~

3 2

← Newer
1
2
3
4
5
6
7
8
...
17
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

Pd-list January 2002