Hi Mitch,
Could you please try to send some sound into some other channels than the 1 and 2 of your audio card, like [dac~ 3 4]. You said that you could not send any input into PD. Apparently you may not use your sound card at all. The output [dac~] send to channel 1 and 2 of your built-in device which redirect them toward your channel 1 and 2 of your sound card. This is the problem I have, I always thought using my soundcard but this is not the case.
Also, the latest version of PAV18 has changed slightly from 04/10 to the 04/16(latest) and the latest one had the same problem than the older ones according to Phil Burk. Please try to recompile pd with the 04/10 version, that I send to you with another email.
Thanks
Alex
Alex, I recompiled with the file you sent. Still does not work. I tried this first:
./pd -listdev Digidesign CoreAudio Driver: Succesfully acquired DirectIO, our PID is: 2104 Audio Devices: device 1: Built-in audio controller;2 inputs, 0 outputs (Default Input) device 2: Digidesign HW ( MBox );2 inputs, 0 outputs device 3: Built-in audio controller;0 inputs, 2 outputs (Default Output) device 4: Digidesign HW ( MBox );0 inputs, 2 outputs
input device 0, output device 2 nchan 2, flags 3, bufs 8, framesperbuf 256
I could get sound out but nothing in. Then I tried:
% ./pd -audioindev 0 -audiooutdev 2 Digidesign CoreAudio Driver: Succesfully acquired DirectIO, our PID is: 2108 input device 0, output device 2 nchan 2, flags 3, bufs 8, framesperbuf 256
I could get sound out but not in. Then I tried:
% ./pd -audioindev 1 -audiooutdev 3 Digidesign CoreAudio Driver: Succesfully acquired DirectIO, our PID is: 2111 input device 1, output device 3 nchan 2, flags 3, bufs 8, framesperbuf 256
I could get sound out but could not get sound in. My sound card is a Digidesign Mbox, which only has 2in and 2out.
Mitch
On Friday, May 2, 2003, at 02:50 AM, Alex wrote:
Hi Mitch,
Could you please try to send some sound into some other channels than the 1 and 2 of your audio card, like [dac~ 3 4]. You said that you could not send any input into PD. Apparently you may not use your sound card at all. The output [dac~] send to channel 1 and 2 of your built-in device which redirect them toward your channel 1 and 2 of your sound card. This is the problem I have, I always thought using my soundcard but this is not the case.
Also, the latest version of PAV18 has changed slightly from 04/10 to the 04/16(latest) and the latest one had the same problem than the older ones according to Phil Burk. Please try to recompile pd with the 04/10 version, that I send to you with another email.
Thanks
Alex
Mitchell Turner, Ph.D. Assistant Professor of Music LaGrange College 601 Broad Street LaGrange, GA 30240 USA
Office: 706-880-8015 FAX: 706-880-8028 mturner@lagrange.edu
-
Alex -
Mitchell Turner