I can confirm that! Got nailed in a live show some years ago when the switch was accidentally in advanced mode. The USB bus would explode whenever I loaded a patch with audio in ...
On May 10, 2013, at 5:04 AM, pd-list-request@iem.at wrote:
From: Julian Brooks jbeezez@gmail.com Subject: [PD] Edirol UA25 on rPi (was) ESI Gigaport HD+ on RPI Date: May 9, 2013 9:37:54 PM EDT To: Miller Puckette msp@ucsd.edu Cc: pd-list pd-list@iem.at
Hi Miller,
Just spotted this and remembered you mentioned an Edirol UA25:
'I've found that with my Edirol UA-25 I have to disable Advance mode in order to make it work in full duplex with JACK.'
From here: http://www.raspberrypi.org/phpBB3/viewtopic.php?p=286222#p286222
Regards,
Julian
On 27 April 2013 16:25, Miller Puckette msp@ucsd.edu wrote: I can't report about that but I have another compliant USB 1.1 interface, Edrol UA25, which I've never been able to get to work with a pi. So I think this is confirmation that that can indeed sometimes happen (if it were just one of us perhaps it could have been a fluke).
cheers M
Dan Wilcox @danomatika danomatika.com robotcowboy.com
Thanks Julian and Dan -
I've never known what that button did but now I guess i do - it makes the device fail.
M
On Fri, May 10, 2013 at 11:52:05AM -0400, Dan Wilcox wrote:
I can confirm that! Got nailed in a live show some years ago when the switch was accidentally in advanced mode. The USB bus would explode whenever I loaded a patch with audio in ...
On May 10, 2013, at 5:04 AM, pd-list-request@iem.at wrote:
From: Julian Brooks jbeezez@gmail.com Subject: [PD] Edirol UA25 on rPi (was) ESI Gigaport HD+ on RPI Date: May 9, 2013 9:37:54 PM EDT To: Miller Puckette msp@ucsd.edu Cc: pd-list pd-list@iem.at
Hi Miller,
Just spotted this and remembered you mentioned an Edirol UA25:
'I've found that with my Edirol UA-25 I have to disable Advance mode in order to make it work in full duplex with JACK.'
From here: http://www.raspberrypi.org/phpBB3/viewtopic.php?p=286222#p286222
Regards,
Julian
On 27 April 2013 16:25, Miller Puckette msp@ucsd.edu wrote: I can't report about that but I have another compliant USB 1.1 interface, Edrol UA25, which I've never been able to get to work with a pi. So I think this is confirmation that that can indeed sometimes happen (if it were just one of us perhaps it could have been a fluke).
cheers M
Dan Wilcox @danomatika danomatika.com robotcowboy.com
Pd-list@iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list
Well, on Linux it enables the Midi ports but it also forces capture/playback to 48k/96k at 24 bit. In my experience, the latter is what borks the USB communication as there isn't enough bandwidth on USB 1 for full stereo duplex of anything other then 16bit, 44.1k. The Edirol "advanced drivers" for OSX & Win can somehow handle that, but of course the Linux drivers don't and you get hard locks. These devices were designed before USB 2.0, so they Roland/Edirol were doing non-standard tricks ...
In any case, the advanced mode switch *does* work with Linux, provided you only want to either capture or playback, but not both simultaneously. I'd imagine it would work with 1 input and 1 output, but I bet that's not an option at the driver level ...
On May 10, 2013, at 12:32 PM, Miller Puckette msp@ucsd.edu wrote:
Thanks Julian and Dan -
I've never known what that button did but now I guess i do - it makes the device fail.
M
On Fri, May 10, 2013 at 11:52:05AM -0400, Dan Wilcox wrote:
I can confirm that! Got nailed in a live show some years ago when the switch was accidentally in advanced mode. The USB bus would explode whenever I loaded a patch with audio in ...
On May 10, 2013, at 5:04 AM, pd-list-request@iem.at wrote:
From: Julian Brooks jbeezez@gmail.com Subject: [PD] Edirol UA25 on rPi (was) ESI Gigaport HD+ on RPI Date: May 9, 2013 9:37:54 PM EDT To: Miller Puckette msp@ucsd.edu Cc: pd-list pd-list@iem.at
Hi Miller,
Just spotted this and remembered you mentioned an Edirol UA25:
'I've found that with my Edirol UA-25 I have to disable Advance mode in order to make it work in full duplex with JACK.'
From here: http://www.raspberrypi.org/phpBB3/viewtopic.php?p=286222#p286222
Regards,
Julian
On 27 April 2013 16:25, Miller Puckette msp@ucsd.edu wrote: I can't report about that but I have another compliant USB 1.1 interface, Edrol UA25, which I've never been able to get to work with a pi. So I think this is confirmation that that can indeed sometimes happen (if it were just one of us perhaps it could have been a fluke).
cheers M
Dan Wilcox @danomatika danomatika.com robotcowboy.com
Pd-list@iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list
Dan Wilcox @danomatika danomatika.com robotcowboy.com
-
Dan Wilcox -
Miller Puckette