Greetings,
I have been working on envelopes lately, and I have come up with something that I'd like to share. I started out with the basic ADSR in Miller's examples; I wanted variable envelope curves, but I didn't want the overhead of on-the-fly sqrt's or complex expr's. Therefore, [multiCurveAdsr] uses table-lookup for enveloping, with just one multiplication for level-scaling. The lookup table only needs to be computed when the "curve factor" is changed.
Three basic curve types are possible. C (curve factor) = 1 gives the basic linear envelope. C > 1 gives a continuous range of fatter, "ead"-like envelopes. C < 1 is a special case; for any value of C less than 1, you get one "quadric"-like, hollow curve. (I really like the way this one sounds, by the way).
The math in the [pd makeTable] subpatch is not elegant -- I took an empirical approach, tweaking things until I got the shapes I wanted -- but it works well enough. One little hitch I ran into was that sustain level varied with different curve factors, so I made a corrective subpatch that keeps sustain values consistent across the different curves. This subpatch only comes into play when the sustain value or curve factor changes.
The right output emits 1 on attack, and 0 after release is complete. I use this to switch~ the voice being enveloped, for further CPU-cycle economy.
The help patch shows the effect of the different curve factors graphically. I don't think there are any dependencies outside of "Miller Vanilla" PD.
I use [multiCurveAdsr] for my own synthesis abstractions, and find that it sounds pretty good, plus it's thrifty on CPU-usage, even with many voices. I hope somebody else finds it useful. Any suggestions for improvement will be greatly appreciated.
Phil Stone Davis, CA
#N canvas 522 22 653 582 10; #X obj 17 84 inlet; #X text 13 63 trigger; #X obj 17 132 sel 0; #X obj 221 316 del $2; #X obj 240 342 f $4; #X msg 17 172 stop; #X text 75 304 ATTACK; #X obj 240 525 outlet~; #X text 54 74 if zero; #X text 55 91 release; #X text 44 109 bang if attack; #X text 320 2 When you send this patch a nonzero trigger it schedules a line~ to do an attack and decay , and if zero , it starts the release ramp.; #X obj 240 413 vline~; #X obj 240 370 pack 0 0; #X obj 240 497 *~; #X obj 267 107 inlet A; #X obj 317 107 inlet D; #X obj 368 107 inlet S; #X obj 419 107 inlet R; #N canvas 0 22 490 340 graph1 0; #X array $0-envCurve 102 float 0; #X coords 0 1 101 0 100 100 1; #X restore 500 272 graph; #X text 604 364 0; #X text 603 264 1; #X text 192 341 DECAY; #X text 347 275 RELEASE; #X obj 141 130 f; #X obj 422 454 outlet switch; #X obj 389 322 pack 0 $5; #X obj 240 447 tabread4~ $0-envCurve; #X obj 422 428 r $0-activate; #X obj 133 182 s $0-activate; #X msg 105 156 1; #X obj 66 132 t b b b; #X obj 362 296 t b b; #X obj 363 357 del $5; #X msg 363 382 0; #X text 4 227 and release switch~; #X text 385 506 - when finished (i.e. , end of release) ,; #X text 386 490 - on attack: send "on" for dsp of parent voice; #X text 395 520 send "off" for dsp of parent voice; #X text 384 475 This outlet may be used as follows:; #X obj 156 107 inlet attackLevel; #X obj 492 189 change; #X obj 502 136 loadbang; #N canvas 0 22 502 500 correctSustain 0; #X obj 174 233 f; #X obj 222 233 + 1; #X obj 129 294 tabread $0-envCurve; #X obj 53 7 inlet sustain; #X obj 63 439 outlet correctedSustain; #X obj 158 384 f; #X obj 143 7 inlet curve; #X obj 129 195 t f f; #X obj 174 209 b; #X obj 129 232 / 100; #X obj 129 354 sel 0; #X obj 129 171 spigot; #X msg 130 147 0; #X msg 162 147 1; #X obj 306 174 spigot; #X msg 307 150 0; #X msg 339 150 1; #X obj 352 236 f; #X obj 307 297 tabread $0-envCurve; #X obj 336 387 f; #X obj 307 198 t f f; #X obj 352 212 b; #X obj 307 235 / 100; #X obj 401 215 - 1; #X obj 129 328 <=; #X obj 307 357 sel 1; #X obj 352 261 t f f f; #X obj 174 258 t f f f; #X obj 53 86 sel 0; #X msg 53 112 0; #X obj 217 107 moses 1; #X obj 307 331 <=; #X obj 90 112 moses 100; #X msg 75 190 100; #X obj 217 85 t b f; #X obj 53 59 f 0; #X obj 143 37 sel 1; #X obj 14 145 f; #X obj 143 63 t b b b; #X obj 53 33 change; #X connect 0 0 27 0; #X connect 1 0 0 1; #X connect 2 0 24 0; #X connect 3 0 39 0; #X connect 5 0 4 0; #X connect 6 0 36 0; #X connect 7 0 0 0; #X connect 7 1 9 0; #X connect 8 0 0 0; #X connect 9 0 24 1; #X connect 10 0 5 0; #X connect 10 1 8 0; #X connect 11 0 7 0; #X connect 12 0 11 1; #X connect 13 0 11 1; #X connect 14 0 20 0; #X connect 15 0 14 1; #X connect 16 0 14 1; #X connect 17 0 26 0; #X connect 18 0 31 0; #X connect 19 0 4 0; #X connect 20 0 17 0; #X connect 20 1 22 0; #X connect 21 0 17 0; #X connect 22 0 31 1; #X connect 23 0 17 1; #X connect 24 0 10 0; #X connect 25 0 19 0; #X connect 25 1 21 0; #X connect 26 0 18 0; #X connect 26 1 19 1; #X connect 26 2 23 0; #X connect 27 0 2 0; #X connect 27 1 5 1; #X connect 27 2 1 0; #X connect 28 0 29 0; #X connect 28 1 32 0; #X connect 29 0 4 0; #X connect 30 0 13 0; #X connect 30 0 15 0; #X connect 30 1 16 0; #X connect 30 1 12 0; #X connect 31 0 25 0; #X connect 32 0 11 0; #X connect 32 0 14 0; #X connect 32 1 33 0; #X connect 33 0 4 0; #X connect 34 0 35 0; #X connect 34 1 30 0; #X connect 35 0 28 0; #X connect 35 0 37 1; #X connect 36 0 38 0; #X connect 36 1 34 0; #X connect 37 0 4 0; #X connect 38 0 37 0; #X connect 38 1 12 0; #X connect 38 2 15 0; #X connect 39 0 35 0; #X restore 323 150 pd correctSustain; #X obj 67 325 pack 100 $2; #X text 17 1 Multi-curve ADSR; #X obj 255 474 r $0-levelmult; #X obj 141 153 s $0-levelmult; #X text 452 36 Curve Factors; #X text 388 53 < 1 - "quadric-like" (hollow) curve , C=-0.214; #X text 17 19 arguments: level , attack time , decay time , sustain level (proportion of overall level 0 - 100) , release time; #X obj 492 107 inlet curveFactor; #X text 388 83 > 1 - exponential (fat) curves , varying with C; #X msg 502 159 1; #X text 118 58 This adsr uses table-lookup for envelope curves ,; #X text 119 73 so it should be pretty cpu-efficient.; #N canvas 547 29 564 445 2802-make-curve 0; #X msg 21 315 0; #X obj 104 115 - 1; #X msg 142 94 0; #X obj 142 120 f; #X obj 167 120 + 1; #X obj 71 224 f; #X obj 20 176 moses 2; #X obj 318 313 expr 1 - (pow( ($f1 / 102) , $f2) ); #X obj 285 158 t b f; #X obj 382 156 t b f; #X obj 318 287 spigot; #X obj 71 289 spigot; #X obj 325 262 0; #X obj 351 262 1; #X obj 78 265 1; #X obj 104 265 0; #X obj 71 314 expr pow( ($f1 / 102) , $f2) -1; #X text 115 296 "quadric-like" curve; #X text 361 294 exponential "fat" curve; #X msg 285 133 -0.214; #X obj 130 392 tabwrite $0-envCurve; #X obj 71 200 b; #X obj 130 363 f; #X obj 38 8 inlet curveFactor; #X msg 38 92 102; #X obj 25 118 sel 0; #X obj 69 116 f; #X obj 69 93 until; #X obj 56 142 t f f b f; #X obj 38 34 t b b b b f; #X obj 226 110 sel 1; #X obj 227 255 spigot; #X obj 232 229 0; #X obj 260 229 1; #X obj 142 148 t f f f f; #X obj 227 279 / 100; #X obj 307 108 moses 1; #X connect 0 0 22 0; #X connect 1 0 26 1; #X connect 2 0 3 1; #X connect 3 0 34 0; #X connect 4 0 3 1; #X connect 5 0 10 0; #X connect 5 0 11 0; #X connect 6 0 0 0; #X connect 6 1 21 0; #X connect 7 0 22 0; #X connect 8 0 12 0; #X connect 8 0 32 0; #X connect 8 0 14 0; #X connect 8 1 16 1; #X connect 9 0 13 0; #X connect 9 0 15 0; #X connect 9 0 32 0; #X connect 9 1 7 1; #X connect 10 0 7 0; #X connect 11 0 16 0; #X connect 12 0 10 1; #X connect 13 0 10 1; #X connect 14 0 11 1; #X connect 15 0 11 1; #X connect 16 0 22 0; #X connect 19 0 8 0; #X connect 21 0 5 0; #X connect 22 0 20 0; #X connect 23 0 29 0; #X connect 24 0 26 0; #X connect 25 0 27 1; #X connect 26 0 28 0; #X connect 27 0 26 0; #X connect 28 0 25 0; #X connect 28 1 5 1; #X connect 28 2 3 0; #X connect 28 3 1 0; #X connect 29 0 27 0; #X connect 29 1 24 0; #X connect 29 2 3 0; #X connect 29 3 2 0; #X connect 29 4 30 0; #X connect 30 0 33 0; #X connect 30 0 12 0; #X connect 30 0 15 0; #X connect 30 1 36 0; #X connect 31 0 35 0; #X connect 32 0 31 1; #X connect 33 0 31 1; #X connect 34 0 6 0; #X connect 34 1 31 0; #X connect 34 2 20 1; #X connect 34 3 4 0; #X connect 35 0 22 0; #X connect 36 0 19 0; #X connect 36 1 9 0; #X restore 492 220 pd $0-make-curve; #X text 399 68 1 - linear; #X text 2 212 cancel decay ,; #X connect 0 0 2 0; #X connect 2 0 5 0; #X connect 2 0 32 0; #X connect 2 1 31 0; #X connect 3 0 4 0; #X connect 4 0 13 0; #X connect 5 0 3 0; #X connect 5 0 33 0; #X connect 12 0 27 0; #X connect 13 0 12 0; #X connect 14 0 7 0; #X connect 15 0 3 1; #X connect 15 0 44 1; #X connect 16 0 13 1; #X connect 17 0 43 0; #X connect 18 0 26 1; #X connect 18 0 33 1; #X connect 24 0 47 0; #X connect 26 0 12 0; #X connect 27 0 14 0; #X connect 28 0 25 0; #X connect 30 0 29 0; #X connect 31 0 3 0; #X connect 31 0 44 0; #X connect 31 1 24 0; #X connect 31 2 30 0; #X connect 32 0 33 0; #X connect 32 1 26 0; #X connect 33 0 34 0; #X connect 34 0 25 0; #X connect 40 0 24 1; #X connect 41 0 56 0; #X connect 42 0 53 0; #X connect 43 0 4 1; #X connect 44 0 12 0; #X connect 46 0 14 1; #X connect 51 0 41 0; #X connect 51 0 43 1; #X connect 53 0 41 0;
#N canvas 231 93 470 546 10; #N canvas 0 22 458 308 (subpatch) 0; #X array envelope 10000 float 2; #X coords 0 1 10000 0 400 140 1; #X restore 22 180 graph; #X obj 304 -173 loadbang; #X obj 138 -30 nbx 5 14 0 100 0 1 empty empty Level 0 -8 0 10 -262144 -1 -1 1 256; #X obj 170 -1 nbx 5 14 0 3000 0 1 empty empty A 0 -8 0 10 -262144 -1 -1 60 256; #X obj 200 30 nbx 5 14 0 2000 0 1 empty empty D 0 -8 0 10 -262144 -1 -1 20 256; #X obj 232 60 nbx 5 14 0 100 0 1 empty empty S 0 -8 0 10 -262144 -1 -1 51 256; #X obj 262 89 nbx 5 14 0 100 0 1 empty empty R 0 -8 0 10 -262144 -1 -1 79 256; #X msg 304 -147 ; pd dsp 1; #X obj 41 -177 bng 15 250 50 0 empty empty empty 0 -6 0 10 -262144 -1 -1; #X msg 80 -41 0; #X obj 80 -65 delay 200; #X obj 131 -88 nbx 5 14 -1e+37 1e+37 0 1 empty empty hold_time 0 -6 0 10 -262144 -1 -1 138 256; #X msg 41 -41 1; #X obj 96 153 tabwrite~ envelope; #X obj 311 122 nbx 5 14 0 20 0 1 empty empty curve_factor 0 -6 0 10 -262144 -1 -1 0 256; #X obj 106 -185 notein; #X obj 106 -162 sel 0; #X obj 41 -159 t b b; #X obj 41 -4 t f b; #X obj 133 -139 t b f; #X obj 212 -97 / 127; #X obj 12 -201 loadbang; #X text 91 -208 Hit bang or MIDI key to see current envelope; #X text 293 -79 Curve Factors; #X text 229 -62 < 1 - "quadric-like" (hollow) curve , C=-0.214; #X text 240 -47 1 - linear; #X text 229 -32 > 1 - exponential (fat) curves , varying with C; #X obj 110 124 multiCurveAdsr 0.98 10 20 99 20; #X floatatom 316 159 5 0 0 0 - - -; #X text 350 155 for switch~ing parent; #X connect 1 0 7 0; #X connect 2 0 27 1; #X connect 3 0 27 2; #X connect 4 0 27 3; #X connect 5 0 27 4; #X connect 6 0 27 5; #X connect 8 0 17 0; #X connect 9 0 27 0; #X connect 10 0 9 0; #X connect 11 0 10 1; #X connect 12 0 18 0; #X connect 14 0 27 6; #X connect 15 1 16 0; #X connect 16 0 9 0; #X connect 16 1 19 0; #X connect 17 0 12 0; #X connect 17 1 10 0; #X connect 18 0 27 0; #X connect 18 1 13 0; #X connect 19 0 12 0; #X connect 19 1 20 0; #X connect 20 0 2 0; #X connect 21 0 17 0; #X connect 27 0 13 0; #X connect 27 1 28 0;
Two small corrections to my original post about [multiCurveAdsr]:
- The abstraction that calculates the curve is called [$0-makeCurve],
not [makeTable].
- The "hollow" curve is "quartic-like", not "quadric-like". (It's
actually an exponential curve tweaked to go to zero).
Phil Stone
This is great! I spent some time trying to do something similar last summer, but eventually gave up due to troubles with the sustain logic. Thanks for sharing!
~Kyle
On 5/17/07, Phil Stone pkstone@ucdavis.edu wrote:
Greetings,
I have been working on envelopes lately, and I have come up with something that I'd like to share. I started out with the basic ADSR in Miller's examples; I wanted variable envelope curves, but I didn't want the overhead of on-the-fly sqrt's or complex expr's. Therefore, [multiCurveAdsr] uses table-lookup for enveloping, with just one multiplication for level-scaling. The lookup table only needs to be computed when the "curve factor" is changed.
Three basic curve types are possible. C (curve factor) = 1 gives the basic linear envelope. C > 1 gives a continuous range of fatter, "ead"-like envelopes. C < 1 is a special case; for any value of C less than 1, you get one "quadric"-like, hollow curve. (I really like the way this one sounds, by the way).
The math in the [pd makeTable] subpatch is not elegant -- I took an empirical approach, tweaking things until I got the shapes I wanted -- but it works well enough. One little hitch I ran into was that sustain level varied with different curve factors, so I made a corrective subpatch that keeps sustain values consistent across the different curves. This subpatch only comes into play when the sustain value or curve factor changes.
The right output emits 1 on attack, and 0 after release is complete. I use this to switch~ the voice being enveloped, for further CPU-cycle economy.
The help patch shows the effect of the different curve factors graphically. I don't think there are any dependencies outside of "Miller Vanilla" PD.
I use [multiCurveAdsr] for my own synthesis abstractions, and find that it sounds pretty good, plus it's thrifty on CPU-usage, even with many voices. I hope somebody else finds it useful. Any suggestions for improvement will be greatly appreciated.
Phil Stone Davis, CA
#N canvas 522 22 653 582 10; #X obj 17 84 inlet; #X text 13 63 trigger; #X obj 17 132 sel 0; #X obj 221 316 del $2; #X obj 240 342 f $4; #X msg 17 172 stop; #X text 75 304 ATTACK; #X obj 240 525 outlet~; #X text 54 74 if zero; #X text 55 91 release; #X text 44 109 bang if attack; #X text 320 2 When you send this patch a nonzero trigger it schedules a line~ to do an attack and decay , and if zero , it starts the release ramp.; #X obj 240 413 vline~; #X obj 240 370 pack 0 0; #X obj 240 497 *~; #X obj 267 107 inlet A; #X obj 317 107 inlet D; #X obj 368 107 inlet S; #X obj 419 107 inlet R; #N canvas 0 22 490 340 graph1 0; #X array $0-envCurve 102 float 0; #X coords 0 1 101 0 100 100 1; #X restore 500 272 graph; #X text 604 364 0; #X text 603 264 1; #X text 192 341 DECAY; #X text 347 275 RELEASE; #X obj 141 130 f; #X obj 422 454 outlet switch; #X obj 389 322 pack 0 $5; #X obj 240 447 tabread4~ $0-envCurve; #X obj 422 428 r $0-activate; #X obj 133 182 s $0-activate; #X msg 105 156 1; #X obj 66 132 t b b b; #X obj 362 296 t b b; #X obj 363 357 del $5; #X msg 363 382 0; #X text 4 227 and release switch~; #X text 385 506 - when finished (i.e. , end of release) ,; #X text 386 490 - on attack: send "on" for dsp of parent voice; #X text 395 520 send "off" for dsp of parent voice; #X text 384 475 This outlet may be used as follows:; #X obj 156 107 inlet attackLevel; #X obj 492 189 change; #X obj 502 136 loadbang; #N canvas 0 22 502 500 correctSustain 0; #X obj 174 233 f; #X obj 222 233 + 1; #X obj 129 294 tabread $0-envCurve; #X obj 53 7 inlet sustain; #X obj 63 439 outlet correctedSustain; #X obj 158 384 f; #X obj 143 7 inlet curve; #X obj 129 195 t f f; #X obj 174 209 b; #X obj 129 232 / 100; #X obj 129 354 sel 0; #X obj 129 171 spigot; #X msg 130 147 0; #X msg 162 147 1; #X obj 306 174 spigot; #X msg 307 150 0; #X msg 339 150 1; #X obj 352 236 f; #X obj 307 297 tabread $0-envCurve; #X obj 336 387 f; #X obj 307 198 t f f; #X obj 352 212 b; #X obj 307 235 / 100; #X obj 401 215 - 1; #X obj 129 328 <=; #X obj 307 357 sel 1; #X obj 352 261 t f f f; #X obj 174 258 t f f f; #X obj 53 86 sel 0; #X msg 53 112 0; #X obj 217 107 moses 1; #X obj 307 331 <=; #X obj 90 112 moses 100; #X msg 75 190 100; #X obj 217 85 t b f; #X obj 53 59 f 0; #X obj 143 37 sel 1; #X obj 14 145 f; #X obj 143 63 t b b b; #X obj 53 33 change; #X connect 0 0 27 0; #X connect 1 0 0 1; #X connect 2 0 24 0; #X connect 3 0 39 0; #X connect 5 0 4 0; #X connect 6 0 36 0; #X connect 7 0 0 0; #X connect 7 1 9 0; #X connect 8 0 0 0; #X connect 9 0 24 1; #X connect 10 0 5 0; #X connect 10 1 8 0; #X connect 11 0 7 0; #X connect 12 0 11 1; #X connect 13 0 11 1; #X connect 14 0 20 0; #X connect 15 0 14 1; #X connect 16 0 14 1; #X connect 17 0 26 0; #X connect 18 0 31 0; #X connect 19 0 4 0; #X connect 20 0 17 0; #X connect 20 1 22 0; #X connect 21 0 17 0; #X connect 22 0 31 1; #X connect 23 0 17 1; #X connect 24 0 10 0; #X connect 25 0 19 0; #X connect 25 1 21 0; #X connect 26 0 18 0; #X connect 26 1 19 1; #X connect 26 2 23 0; #X connect 27 0 2 0; #X connect 27 1 5 1; #X connect 27 2 1 0; #X connect 28 0 29 0; #X connect 28 1 32 0; #X connect 29 0 4 0; #X connect 30 0 13 0; #X connect 30 0 15 0; #X connect 30 1 16 0; #X connect 30 1 12 0; #X connect 31 0 25 0; #X connect 32 0 11 0; #X connect 32 0 14 0; #X connect 32 1 33 0; #X connect 33 0 4 0; #X connect 34 0 35 0; #X connect 34 1 30 0; #X connect 35 0 28 0; #X connect 35 0 37 1; #X connect 36 0 38 0; #X connect 36 1 34 0; #X connect 37 0 4 0; #X connect 38 0 37 0; #X connect 38 1 12 0; #X connect 38 2 15 0; #X connect 39 0 35 0; #X restore 323 150 pd correctSustain; #X obj 67 325 pack 100 $2; #X text 17 1 Multi-curve ADSR; #X obj 255 474 r $0-levelmult; #X obj 141 153 s $0-levelmult; #X text 452 36 Curve Factors; #X text 388 53 < 1 - "quadric-like" (hollow) curve , C=-0.214; #X text 17 19 arguments: level , attack time , decay time , sustain level (proportion of overall level 0 - 100) , release time; #X obj 492 107 inlet curveFactor; #X text 388 83 > 1 - exponential (fat) curves , varying with C; #X msg 502 159 1; #X text 118 58 This adsr uses table-lookup for envelope curves ,; #X text 119 73 so it should be pretty cpu-efficient.; #N canvas 547 29 564 445 2802-make-curve 0; #X msg 21 315 0; #X obj 104 115 - 1; #X msg 142 94 0; #X obj 142 120 f; #X obj 167 120 + 1; #X obj 71 224 f; #X obj 20 176 moses 2; #X obj 318 313 expr 1 - (pow( ($f1 / 102) , $f2) ); #X obj 285 158 t b f; #X obj 382 156 t b f; #X obj 318 287 spigot; #X obj 71 289 spigot; #X obj 325 262 0; #X obj 351 262 1; #X obj 78 265 1; #X obj 104 265 0; #X obj 71 314 expr pow( ($f1 / 102) , $f2) -1; #X text 115 296 "quadric-like" curve; #X text 361 294 exponential "fat" curve; #X msg 285 133 -0.214; #X obj 130 392 tabwrite $0-envCurve; #X obj 71 200 b; #X obj 130 363 f; #X obj 38 8 inlet curveFactor; #X msg 38 92 102; #X obj 25 118 sel 0; #X obj 69 116 f; #X obj 69 93 until; #X obj 56 142 t f f b f; #X obj 38 34 t b b b b f; #X obj 226 110 sel 1; #X obj 227 255 spigot; #X obj 232 229 0; #X obj 260 229 1; #X obj 142 148 t f f f f; #X obj 227 279 / 100; #X obj 307 108 moses 1; #X connect 0 0 22 0; #X connect 1 0 26 1; #X connect 2 0 3 1; #X connect 3 0 34 0; #X connect 4 0 3 1; #X connect 5 0 10 0; #X connect 5 0 11 0; #X connect 6 0 0 0; #X connect 6 1 21 0; #X connect 7 0 22 0; #X connect 8 0 12 0; #X connect 8 0 32 0; #X connect 8 0 14 0; #X connect 8 1 16 1; #X connect 9 0 13 0; #X connect 9 0 15 0; #X connect 9 0 32 0; #X connect 9 1 7 1; #X connect 10 0 7 0; #X connect 11 0 16 0; #X connect 12 0 10 1; #X connect 13 0 10 1; #X connect 14 0 11 1; #X connect 15 0 11 1; #X connect 16 0 22 0; #X connect 19 0 8 0; #X connect 21 0 5 0; #X connect 22 0 20 0; #X connect 23 0 29 0; #X connect 24 0 26 0; #X connect 25 0 27 1; #X connect 26 0 28 0; #X connect 27 0 26 0; #X connect 28 0 25 0; #X connect 28 1 5 1; #X connect 28 2 3 0; #X connect 28 3 1 0; #X connect 29 0 27 0; #X connect 29 1 24 0; #X connect 29 2 3 0; #X connect 29 3 2 0; #X connect 29 4 30 0; #X connect 30 0 33 0; #X connect 30 0 12 0; #X connect 30 0 15 0; #X connect 30 1 36 0; #X connect 31 0 35 0; #X connect 32 0 31 1; #X connect 33 0 31 1; #X connect 34 0 6 0; #X connect 34 1 31 0; #X connect 34 2 20 1; #X connect 34 3 4 0; #X connect 35 0 22 0; #X connect 36 0 19 0; #X connect 36 1 9 0; #X restore 492 220 pd $0-make-curve; #X text 399 68 1 - linear; #X text 2 212 cancel decay ,; #X connect 0 0 2 0; #X connect 2 0 5 0; #X connect 2 0 32 0; #X connect 2 1 31 0; #X connect 3 0 4 0; #X connect 4 0 13 0; #X connect 5 0 3 0; #X connect 5 0 33 0; #X connect 12 0 27 0; #X connect 13 0 12 0; #X connect 14 0 7 0; #X connect 15 0 3 1; #X connect 15 0 44 1; #X connect 16 0 13 1; #X connect 17 0 43 0; #X connect 18 0 26 1; #X connect 18 0 33 1; #X connect 24 0 47 0; #X connect 26 0 12 0; #X connect 27 0 14 0; #X connect 28 0 25 0; #X connect 30 0 29 0; #X connect 31 0 3 0; #X connect 31 0 44 0; #X connect 31 1 24 0; #X connect 31 2 30 0; #X connect 32 0 33 0; #X connect 32 1 26 0; #X connect 33 0 34 0; #X connect 34 0 25 0; #X connect 40 0 24 1; #X connect 41 0 56 0; #X connect 42 0 53 0; #X connect 43 0 4 1; #X connect 44 0 12 0; #X connect 46 0 14 1; #X connect 51 0 41 0; #X connect 51 0 43 1; #X connect 53 0 41 0;
#N canvas 231 93 470 546 10; #N canvas 0 22 458 308 (subpatch) 0; #X array envelope 10000 float 2; #X coords 0 1 10000 0 400 140 1; #X restore 22 180 graph; #X obj 304 -173 loadbang; #X obj 138 -30 nbx 5 14 0 100 0 1 empty empty Level 0 -8 0 10 -262144 -1 -1 1 256; #X obj 170 -1 nbx 5 14 0 3000 0 1 empty empty A 0 -8 0 10 -262144 -1 -1 60 256; #X obj 200 30 nbx 5 14 0 2000 0 1 empty empty D 0 -8 0 10 -262144 -1 -1 20 256; #X obj 232 60 nbx 5 14 0 100 0 1 empty empty S 0 -8 0 10 -262144 -1 -1 51 256; #X obj 262 89 nbx 5 14 0 100 0 1 empty empty R 0 -8 0 10 -262144 -1 -1 79 256; #X msg 304 -147 ; pd dsp 1; #X obj 41 -177 bng 15 250 50 0 empty empty empty 0 -6 0 10 -262144 -1 -1; #X msg 80 -41 0; #X obj 80 -65 delay 200; #X obj 131 -88 nbx 5 14 -1e+37 1e+37 0 1 empty empty hold_time 0 -6 0 10 -262144 -1 -1 138 256; #X msg 41 -41 1; #X obj 96 153 tabwrite~ envelope; #X obj 311 122 nbx 5 14 0 20 0 1 empty empty curve_factor 0 -6 0 10 -262144 -1 -1 0 256; #X obj 106 -185 notein; #X obj 106 -162 sel 0; #X obj 41 -159 t b b; #X obj 41 -4 t f b; #X obj 133 -139 t b f; #X obj 212 -97 / 127; #X obj 12 -201 loadbang; #X text 91 -208 Hit bang or MIDI key to see current envelope; #X text 293 -79 Curve Factors; #X text 229 -62 < 1 - "quadric-like" (hollow) curve , C=-0.214; #X text 240 -47 1 - linear; #X text 229 -32 > 1 - exponential (fat) curves , varying with C; #X obj 110 124 multiCurveAdsr 0.98 10 20 99 20; #X floatatom 316 159 5 0 0 0 - - -; #X text 350 155 for switch~ing parent; #X connect 1 0 7 0; #X connect 2 0 27 1; #X connect 3 0 27 2; #X connect 4 0 27 3; #X connect 5 0 27 4; #X connect 6 0 27 5; #X connect 8 0 17 0; #X connect 9 0 27 0; #X connect 10 0 9 0; #X connect 11 0 10 1; #X connect 12 0 18 0; #X connect 14 0 27 6; #X connect 15 1 16 0; #X connect 16 0 9 0; #X connect 16 1 19 0; #X connect 17 0 12 0; #X connect 17 1 10 0; #X connect 18 0 27 0; #X connect 18 1 13 0; #X connect 19 0 12 0; #X connect 19 1 20 0; #X connect 20 0 2 0; #X connect 21 0 17 0; #X connect 27 0 13 0; #X connect 27 1 28 0;
PD-list@iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list
-
Kyle Klipowicz -
Phil Stone