In vanilla can I map the GOP size? I want to resize GOP proportionally.
Thanks any advance!
Cheers Esteban Viveros
Oh I wish we could...
(and yes I know it's not *that* GOP)
brad
On Fri, May 12, 2017 at 7:50 PM, Esteban Viveros emviveros@gmail.com wrote:
In vanilla can I map the GOP size? I want to resize GOP proportionally.
Thanks any advance!
Cheers Esteban Viveros --
www.estebanviveros.com
Pd-list@lists.iem.at mailing list UNSUBSCRIBE and account-management -> https://lists.puredata.info/ listinfo/pd-list
You can do this with a "coords" or "donecanvasdialog" message sent to the canvas (ie. using [iemguts/sendcanvas] or [send pd-canvasname.pd]).
I don't remember the arguments exactly, but you can figure them out by opening a .pd file with GOP enabled and then searching for the "coords" line at the bottom. There are 5 or 6 arguments which correspond to GOP dimensions.
From: Pd-list pd-list-bounces@lists.iem.at on behalf of Brad Garton garton@columbia.edu Sent: 13 May 2017 03:47 To: Esteban Viveros Cc: pd-list@mail.iem.at Subject: Re: [PD] How to map GOP size dynamically
Oh I wish we could...
(and yes I know it's not *that* GOP)
brad
On Fri, May 12, 2017 at 7:50 PM, Esteban Viveros <emviveros@gmail.commailto:emviveros@gmail.com> wrote: In vanilla can I map the GOP size? I want to resize GOP proportionally.
Thanks any advance!
Cheers Esteban Viveros --
www.estebanviveros.comhttp://www.estebanviveros.com
Pd-list@lists.iem.atmailto:Pd-list@lists.iem.at mailing list UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list
Thanks for response...
Liam... I can change dimension of GOP size directly by one number in the proportion I wish. But, in edit mode, I can resize a GOP subtpatch in main patch with mouse. I want to maintain the proportion of rectangle when I slide the right side of my GOP abstraction. About donecanvasdialog message I found:
[donecanvasdialog <x-units> <y-units> <gop> <x-from> <y-from> <x-to> <y-to> <x-size> <y-size> <x-margin> <y-margin>(
For that I'm wanting to receive a message with value of <x-size> of donecanvasdialog message to scale out <y-to> coordinate.
Exist some message to send to $0-gopSubpatch which retrieve me a donecanvasdialog or coords messages arguments..?
Em sáb, 13 de mai de 2017 às 01:36, Liam Goodacre liamg_uw@hotmail.com escreveu:
You can do this with a "coords" or "donecanvasdialog" message sent to the canvas (ie. using [iemguts/sendcanvas] or [send pd-canvasname.pd]).
I don't remember the arguments exactly, but you can figure them out by opening a .pd file with GOP enabled and then searching for the "coords" line at the bottom. There are 5 or 6 arguments which correspond to GOP dimensions.
*From:* Pd-list pd-list-bounces@lists.iem.at on behalf of Brad Garton < garton@columbia.edu> *Sent:* 13 May 2017 03:47 *To:* Esteban Viveros *Cc:* pd-list@mail.iem.at *Subject:* Re: [PD] How to map GOP size dynamically
Oh I wish we could...
(and yes I know it's not *that* GOP)
brad
On Fri, May 12, 2017 at 7:50 PM, Esteban Viveros emviveros@gmail.com wrote:
In vanilla can I map the GOP size? I want to resize GOP proportionally.
Thanks any advance!
Cheers Esteban Viveros --
www.estebanviveros.com
Pd-list@lists.iem.at mailing list UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list
Pd-list@lists.iem.at mailing list UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list
L2Ork and Purr Data let you retrieve the GOP info with the [canvasinfo] object. Unfortunately, I don't think that there is any conventional way of doing in in Vanilla, but I can think of a hack. You could load the .pd text file itself into a [text] object and then search for the "coords" line, which will be the last one before all of the connections. You could use this to find the GOP area that the patch loaded with (although not any changes that have been made to it since then).
It would be more difficult, though not impossible, to implement this if you are dealing with a sub-patch within a parent-patch. You would also need to use an external if you wanted to detect the filename within the patch, for automatically loading the .pd file.
From: Esteban Viveros emviveros@gmail.com Sent: 13 May 2017 16:07 To: Liam Goodacre; PD list Subject: Re: [PD] How to map GOP size dynamically
Thanks for response...
Liam... I can change dimension of GOP size directly by one number in the proportion I wish. But, in edit mode, I can resize a GOP subtpatch in main patch with mouse. I want to maintain the proportion of rectangle when I slide the right side of my GOP abstraction. About donecanvasdialog message I found:
[donecanvasdialog <x-units> <y-units> <gop> <x-from> <y-from> <x-to> <y-to> <x-size> <y-size> <x-margin> <y-margin>(
For that I'm wanting to receive a message with value of <x-size> of donecanvasdialog message to scale out <y-to> coordinate.
Exist some message to send to $0-gopSubpatch which retrieve me a donecanvasdialog or coords messages arguments..?
Em sáb, 13 de mai de 2017 às 01:36, Liam Goodacre <liamg_uw@hotmail.commailto:liamg_uw@hotmail.com> escreveu:
You can do this with a "coords" or "donecanvasdialog" message sent to the canvas (ie. using [iemguts/sendcanvas] or [send pd-canvasname.pd]).
I don't remember the arguments exactly, but you can figure them out by opening a .pd file with GOP enabled and then searching for the "coords" line at the bottom. There are 5 or 6 arguments which correspond to GOP dimensions.
From: Pd-list <pd-list-bounces@lists.iem.atmailto:pd-list-bounces@lists.iem.at> on behalf of Brad Garton <garton@columbia.edumailto:garton@columbia.edu> Sent: 13 May 2017 03:47 To: Esteban Viveros Cc: pd-list@mail.iem.atmailto:pd-list@mail.iem.at Subject: Re: [PD] How to map GOP size dynamically
Oh I wish we could...
(and yes I know it's not *that* GOP)
brad
On Fri, May 12, 2017 at 7:50 PM, Esteban Viveros <emviveros@gmail.commailto:emviveros@gmail.com> wrote: In vanilla can I map the GOP size? I want to resize GOP proportionally.
Thanks any advance!
Cheers Esteban Viveros --
www.estebanviveros.comhttp://www.estebanviveros.com
Pd-list@lists.iem.atmailto:Pd-list@lists.iem.at mailing list UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list
Pd-list@lists.iem.atmailto:Pd-list@lists.iem.at mailing list UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list --
www.estebanviveros.comhttp://www.estebanviveros.com
Liam... Thanks a lot for hacks..!!! I will try to implement it this week and post results here.
Cheers
Em seg, 15 de mai de 2017 04:07, Liam Goodacre liamg_uw@hotmail.com escreveu:
L2Ork and Purr Data let you retrieve the GOP info with the [canvasinfo] object. Unfortunately, I don't think that there is any conventional way of doing in in Vanilla, but I can think of a hack. You could load the .pd text file itself into a [text] object and then search for the "coords" line, which will be the last one before all of the connections. You could use this to find the GOP area that the patch loaded with (although not any changes that have been made to it since then).
It would be more difficult, though not impossible, to implement this if you are dealing with a sub-patch within a parent-patch. You would also need to use an external if you wanted to detect the filename within the patch, for automatically loading the .pd file.
*From:* Esteban Viveros emviveros@gmail.com *Sent:* 13 May 2017 16:07 *To:* Liam Goodacre; PD list
*Subject:* Re: [PD] How to map GOP size dynamically Thanks for response...
Liam... I can change dimension of GOP size directly by one number in the proportion I wish. But, in edit mode, I can resize a GOP subtpatch in main patch with mouse. I want to maintain the proportion of rectangle when I slide the right side of my GOP abstraction. About donecanvasdialog message I found:
[donecanvasdialog <x-units> <y-units> <gop> <x-from> <y-from> <x-to> <y-to> <x-size> <y-size> <x-margin> <y-margin>(
For that I'm wanting to receive a message with value of <x-size> of donecanvasdialog message to scale out <y-to> coordinate.
Exist some message to send to $0-gopSubpatch which retrieve me a donecanvasdialog or coords messages arguments..?
Em sáb, 13 de mai de 2017 às 01:36, Liam Goodacre liamg_uw@hotmail.com escreveu:
You can do this with a "coords" or "donecanvasdialog" message sent to the canvas (ie. using [iemguts/sendcanvas] or [send pd-canvasname.pd]).
I don't remember the arguments exactly, but you can figure them out by opening a .pd file with GOP enabled and then searching for the "coords" line at the bottom. There are 5 or 6 arguments which correspond to GOP dimensions.
*From:* Pd-list pd-list-bounces@lists.iem.at on behalf of Brad Garton < garton@columbia.edu> *Sent:* 13 May 2017 03:47 *To:* Esteban Viveros *Cc:* pd-list@mail.iem.at *Subject:* Re: [PD] How to map GOP size dynamically
Oh I wish we could...
(and yes I know it's not *that* GOP)
brad
On Fri, May 12, 2017 at 7:50 PM, Esteban Viveros emviveros@gmail.com wrote:
In vanilla can I map the GOP size? I want to resize GOP proportionally.
Thanks any advance!
Cheers Esteban Viveros --
www.estebanviveros.com
Pd-list@lists.iem.at mailing list UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list
Pd-list@lists.iem.at mailing list UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list
--
www.estebanviveros.com _______________________________________________ Pd-list@lists.iem.at mailing list UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list
I did a test without success.. When I try to change dimension of my abstraction, pd pops a message 'Discard changes to "abstraction.pd"?'. I'm realizing it's impossible to do what I want in pd vanilla.
I can't find coords in the parent patch.. Only in the abstraction.. If I need to use multiple abstraction I can't see solution.. Well I go ahead without this feature.. :/
Thanks.. Esteban
Em seg, 15 de mai de 2017 às 18:59, Esteban Viveros emviveros@gmail.com escreveu:
Liam... Thanks a lot for hacks..!!! I will try to implement it this week and post results here.
Cheers
Em seg, 15 de mai de 2017 04:07, Liam Goodacre liamg_uw@hotmail.com escreveu:
L2Ork and Purr Data let you retrieve the GOP info with the [canvasinfo] object. Unfortunately, I don't think that there is any conventional way of doing in in Vanilla, but I can think of a hack. You could load the .pd text file itself into a [text] object and then search for the "coords" line, which will be the last one before all of the connections. You could use this to find the GOP area that the patch loaded with (although not any changes that have been made to it since then).
It would be more difficult, though not impossible, to implement this if you are dealing with a sub-patch within a parent-patch. You would also need to use an external if you wanted to detect the filename within the patch, for automatically loading the .pd file.
*From:* Esteban Viveros emviveros@gmail.com *Sent:* 13 May 2017 16:07 *To:* Liam Goodacre; PD list
*Subject:* Re: [PD] How to map GOP size dynamically Thanks for response...
Liam... I can change dimension of GOP size directly by one number in the proportion I wish. But, in edit mode, I can resize a GOP subtpatch in main patch with mouse. I want to maintain the proportion of rectangle when I slide the right side of my GOP abstraction. About donecanvasdialog message I found:
[donecanvasdialog <x-units> <y-units> <gop> <x-from> <y-from> <x-to> <y-to> <x-size> <y-size> <x-margin> <y-margin>(
For that I'm wanting to receive a message with value of <x-size> of donecanvasdialog message to scale out <y-to> coordinate.
Exist some message to send to $0-gopSubpatch which retrieve me a donecanvasdialog or coords messages arguments..?
Em sáb, 13 de mai de 2017 às 01:36, Liam Goodacre liamg_uw@hotmail.com escreveu:
You can do this with a "coords" or "donecanvasdialog" message sent to the canvas (ie. using [iemguts/sendcanvas] or [send pd-canvasname.pd]).
I don't remember the arguments exactly, but you can figure them out by opening a .pd file with GOP enabled and then searching for the "coords" line at the bottom. There are 5 or 6 arguments which correspond to GOP dimensions.
*From:* Pd-list pd-list-bounces@lists.iem.at on behalf of Brad Garton garton@columbia.edu *Sent:* 13 May 2017 03:47 *To:* Esteban Viveros *Cc:* pd-list@mail.iem.at *Subject:* Re: [PD] How to map GOP size dynamically
Oh I wish we could...
(and yes I know it's not *that* GOP)
brad
On Fri, May 12, 2017 at 7:50 PM, Esteban Viveros emviveros@gmail.com wrote:
In vanilla can I map the GOP size? I want to resize GOP proportionally.
Thanks any advance!
Cheers Esteban Viveros --
www.estebanviveros.com
Pd-list@lists.iem.at mailing list UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list
Pd-list@lists.iem.at mailing list UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list
--
www.estebanviveros.com _______________________________________________ Pd-list@lists.iem.at mailing list UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list
--
www.estebanviveros.com
Don't give up yet!
The "discard changes..." message is coming because you have made changes to the loaded abstraction, which will be lost if you make changes to the object name. You can "fix" this with a [dirty 0( message, which tricks the patch into thinking that there aren't any unsaved changes. Beware though--this means that if there are any, you'll lose them for good!
You're right--the "coords" message will only come in the patch or sub-patch file where the GOP window is active. All you need to know is the file name of the abstraction that you want to read. Is it just a few specific GOP abstractions that you wish to resize? If so, then it's easy--you just send a [read this-abstraction.pd( message to [text define]. If you want to resize *any* abstraction, then we'll have to think of a way of getting the right filename into the "read" message. This should be possible, but I'd need to know more about what you're doing.
From: Esteban Viveros emviveros@gmail.com Sent: 16 May 2017 03:48 To: Liam Goodacre; PD list Subject: Re: [PD] How to map GOP size dynamically
I did a test without success.. When I try to change dimension of my abstraction, pd pops a message 'Discard changes to "abstraction.pd"?'. I'm realizing it's impossible to do what I want in pd vanilla.
I can't find coords in the parent patch.. Only in the abstraction.. If I need to use multiple abstraction I can't see solution.. Well I go ahead without this feature.. :/
Thanks.. Esteban
Em seg, 15 de mai de 2017 às 18:59, Esteban Viveros <emviveros@gmail.commailto:emviveros@gmail.com> escreveu:
Liam... Thanks a lot for hacks..!!! I will try to implement it this week and post results here.
Cheers
Em seg, 15 de mai de 2017 04:07, Liam Goodacre <liamg_uw@hotmail.commailto:liamg_uw@hotmail.com> escreveu:
L2Ork and Purr Data let you retrieve the GOP info with the [canvasinfo] object. Unfortunately, I don't think that there is any conventional way of doing in in Vanilla, but I can think of a hack. You could load the .pd text file itself into a [text] object and then search for the "coords" line, which will be the last one before all of the connections. You could use this to find the GOP area that the patch loaded with (although not any changes that have been made to it since then).
It would be more difficult, though not impossible, to implement this if you are dealing with a sub-patch within a parent-patch. You would also need to use an external if you wanted to detect the filename within the patch, for automatically loading the .pd file.
From: Esteban Viveros <emviveros@gmail.commailto:emviveros@gmail.com> Sent: 13 May 2017 16:07 To: Liam Goodacre; PD list
Subject: Re: [PD] How to map GOP size dynamically Thanks for response...
Liam... I can change dimension of GOP size directly by one number in the proportion I wish. But, in edit mode, I can resize a GOP subtpatch in main patch with mouse. I want to maintain the proportion of rectangle when I slide the right side of my GOP abstraction. About donecanvasdialog message I found:
[donecanvasdialog <x-units> <y-units> <gop> <x-from> <y-from> <x-to> <y-to> <x-size> <y-size> <x-margin> <y-margin>(
For that I'm wanting to receive a message with value of <x-size> of donecanvasdialog message to scale out <y-to> coordinate.
Exist some message to send to $0-gopSubpatch which retrieve me a donecanvasdialog or coords messages arguments..?
Em sáb, 13 de mai de 2017 às 01:36, Liam Goodacre <liamg_uw@hotmail.commailto:liamg_uw@hotmail.com> escreveu:
You can do this with a "coords" or "donecanvasdialog" message sent to the canvas (ie. using [iemguts/sendcanvas] or [send pd-canvasname.pd]).
I don't remember the arguments exactly, but you can figure them out by opening a .pd file with GOP enabled and then searching for the "coords" line at the bottom. There are 5 or 6 arguments which correspond to GOP dimensions.
From: Pd-list <pd-list-bounces@lists.iem.atmailto:pd-list-bounces@lists.iem.at> on behalf of Brad Garton <garton@columbia.edumailto:garton@columbia.edu> Sent: 13 May 2017 03:47 To: Esteban Viveros Cc: pd-list@mail.iem.atmailto:pd-list@mail.iem.at Subject: Re: [PD] How to map GOP size dynamically
Oh I wish we could...
(and yes I know it's not *that* GOP)
brad
On Fri, May 12, 2017 at 7:50 PM, Esteban Viveros <emviveros@gmail.commailto:emviveros@gmail.com> wrote: In vanilla can I map the GOP size? I want to resize GOP proportionally.
Thanks any advance!
Cheers Esteban Viveros --
www.estebanviveros.comhttp://www.estebanviveros.com
Pd-list@lists.iem.atmailto:Pd-list@lists.iem.at mailing list UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list
Pd-list@lists.iem.atmailto:Pd-list@lists.iem.at mailing list UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list --
www.estebanviveros.comhttp://www.estebanviveros.com
Pd-list@lists.iem.atmailto:Pd-list@lists.iem.at mailing list UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list --
www.estebanviveros.comhttp://www.estebanviveros.com
--
www.estebanviveros.comhttp://www.estebanviveros.com
Ok! I'm starting to clone kslider object from Max. In Max is possible resize more than one [kslider] simultaneously, so formely I want this feature.
Other game rule is: Cyclone library can be used. :)
I attached the patch I have at this moment.
Em ter, 16 de mai de 2017 às 02:03, Liam Goodacre liamg_uw@hotmail.com escreveu:
Don't give up yet!
- The "discard changes..." message is coming because you have made
changes to the loaded abstraction, which will be lost if you make changes to the object name. You can "fix" this with a [dirty 0( message, which tricks the patch into thinking that there aren't any unsaved changes. Beware though--this means that if there are any, you'll lose them for good!
- You're right--the "coords" message will only come in the patch or
sub-patch file where the GOP window is active. All you need to know is the file name of the abstraction that you want to read. Is it just a few specific GOP abstractions that you wish to resize? If so, then it's easy--you just send a [read this-abstraction.pd( message to [text define]. If you want to resize *any* abstraction, then we'll have to think of a way of getting the right filename into the "read" message. This should be possible, but I'd need to know more about what you're doing.
*From:* Esteban Viveros emviveros@gmail.com *Sent:* 16 May 2017 03:48
*To:* Liam Goodacre; PD list *Subject:* Re: [PD] How to map GOP size dynamically I did a test without success.. When I try to change dimension of my abstraction, pd pops a message 'Discard changes to "abstraction.pd"?'. I'm realizing it's impossible to do what I want in pd vanilla.
I can't find coords in the parent patch.. Only in the abstraction.. If I need to use multiple abstraction I can't see solution.. Well I go ahead without this feature.. :/
Thanks.. Esteban
Em seg, 15 de mai de 2017 às 18:59, Esteban Viveros emviveros@gmail.com escreveu:
Liam... Thanks a lot for hacks..!!! I will try to implement it this week and post results here.
Cheers
Em seg, 15 de mai de 2017 04:07, Liam Goodacre liamg_uw@hotmail.com escreveu:
L2Ork and Purr Data let you retrieve the GOP info with the [canvasinfo] object. Unfortunately, I don't think that there is any conventional way of doing in in Vanilla, but I can think of a hack. You could load the .pd text file itself into a [text] object and then search for the "coords" line, which will be the last one before all of the connections. You could use this to find the GOP area that the patch loaded with (although not any changes that have been made to it since then).
It would be more difficult, though not impossible, to implement this if you are dealing with a sub-patch within a parent-patch. You would also need to use an external if you wanted to detect the filename within the patch, for automatically loading the .pd file.
*From:* Esteban Viveros emviveros@gmail.com *Sent:* 13 May 2017 16:07 *To:* Liam Goodacre; PD list
*Subject:* Re: [PD] How to map GOP size dynamically Thanks for response...
Liam... I can change dimension of GOP size directly by one number in the proportion I wish. But, in edit mode, I can resize a GOP subtpatch in main patch with mouse. I want to maintain the proportion of rectangle when I slide the right side of my GOP abstraction. About donecanvasdialog message I found:
[donecanvasdialog <x-units> <y-units> <gop> <x-from> <y-from> <x-to> <y-to> <x-size> <y-size> <x-margin> <y-margin>(
For that I'm wanting to receive a message with value of <x-size> of donecanvasdialog message to scale out <y-to> coordinate.
Exist some message to send to $0-gopSubpatch which retrieve me a donecanvasdialog or coords messages arguments..?
Em sáb, 13 de mai de 2017 às 01:36, Liam Goodacre liamg_uw@hotmail.com escreveu:
You can do this with a "coords" or "donecanvasdialog" message sent to the canvas (ie. using [iemguts/sendcanvas] or [send pd-canvasname.pd]).
I don't remember the arguments exactly, but you can figure them out by opening a .pd file with GOP enabled and then searching for the "coords" line at the bottom. There are 5 or 6 arguments which correspond to GOP dimensions.
*From:* Pd-list pd-list-bounces@lists.iem.at on behalf of Brad Garton garton@columbia.edu *Sent:* 13 May 2017 03:47 *To:* Esteban Viveros *Cc:* pd-list@mail.iem.at *Subject:* Re: [PD] How to map GOP size dynamically
Oh I wish we could...
(and yes I know it's not *that* GOP)
brad
On Fri, May 12, 2017 at 7:50 PM, Esteban Viveros emviveros@gmail.com wrote:
In vanilla can I map the GOP size? I want to resize GOP proportionally.
Thanks any advance!
Cheers Esteban Viveros --
www.estebanviveros.com
Pd-list@lists.iem.at mailing list UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list
Pd-list@lists.iem.at mailing list UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list
--
www.estebanviveros.com _______________________________________________ Pd-list@lists.iem.at mailing list UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list
--
www.estebanviveros.com
--
www.estebanviveros.com _______________________________________________ Pd-list@lists.iem.at mailing list UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list
some more..
- I use dirty 1 message in kslider "donecanvasdialog" message and it's
solved.
- I want to resize more than one, but simultaneously in vanilla it seems
to be impossible once I don't have the possibility to resize more than one GOP abstraction at time. (any object to tell the truth)
Em ter, 16 de mai de 2017 às 18:47, Esteban Viveros emviveros@gmail.com escreveu:
Ok! I'm starting to clone kslider object from Max. In Max is possible resize more than one [kslider] simultaneously, so formely I want this feature.
Other game rule is: Cyclone library can be used. :)
I attached the patch I have at this moment.
Em ter, 16 de mai de 2017 às 02:03, Liam Goodacre liamg_uw@hotmail.com escreveu:
Don't give up yet!
- The "discard changes..." message is coming because you have made
changes to the loaded abstraction, which will be lost if you make changes to the object name. You can "fix" this with a [dirty 0( message, which tricks the patch into thinking that there aren't any unsaved changes. Beware though--this means that if there are any, you'll lose them for good!
- You're right--the "coords" message will only come in the patch or
sub-patch file where the GOP window is active. All you need to know is the file name of the abstraction that you want to read. Is it just a few specific GOP abstractions that you wish to resize? If so, then it's easy--you just send a [read this-abstraction.pd( message to [text define]. If you want to resize *any* abstraction, then we'll have to think of a way of getting the right filename into the "read" message. This should be possible, but I'd need to know more about what you're doing.
*From:* Esteban Viveros emviveros@gmail.com *Sent:* 16 May 2017 03:48
*To:* Liam Goodacre; PD list *Subject:* Re: [PD] How to map GOP size dynamically I did a test without success.. When I try to change dimension of my abstraction, pd pops a message 'Discard changes to "abstraction.pd"?'. I'm realizing it's impossible to do what I want in pd vanilla.
I can't find coords in the parent patch.. Only in the abstraction.. If I need to use multiple abstraction I can't see solution.. Well I go ahead without this feature.. :/
Thanks.. Esteban
Em seg, 15 de mai de 2017 às 18:59, Esteban Viveros emviveros@gmail.com escreveu:
Liam... Thanks a lot for hacks..!!! I will try to implement it this week and post results here.
Cheers
Em seg, 15 de mai de 2017 04:07, Liam Goodacre liamg_uw@hotmail.com escreveu:
L2Ork and Purr Data let you retrieve the GOP info with the [canvasinfo] object. Unfortunately, I don't think that there is any conventional way of doing in in Vanilla, but I can think of a hack. You could load the .pd text file itself into a [text] object and then search for the "coords" line, which will be the last one before all of the connections. You could use this to find the GOP area that the patch loaded with (although not any changes that have been made to it since then).
It would be more difficult, though not impossible, to implement this if you are dealing with a sub-patch within a parent-patch. You would also need to use an external if you wanted to detect the filename within the patch, for automatically loading the .pd file.
*From:* Esteban Viveros emviveros@gmail.com *Sent:* 13 May 2017 16:07 *To:* Liam Goodacre; PD list
*Subject:* Re: [PD] How to map GOP size dynamically Thanks for response...
Liam... I can change dimension of GOP size directly by one number in the proportion I wish. But, in edit mode, I can resize a GOP subtpatch in main patch with mouse. I want to maintain the proportion of rectangle when I slide the right side of my GOP abstraction. About donecanvasdialog message I found:
[donecanvasdialog <x-units> <y-units> <gop> <x-from> <y-from> <x-to> <y-to> <x-size> <y-size> <x-margin> <y-margin>(
For that I'm wanting to receive a message with value of <x-size> of donecanvasdialog message to scale out <y-to> coordinate.
Exist some message to send to $0-gopSubpatch which retrieve me a donecanvasdialog or coords messages arguments..?
Em sáb, 13 de mai de 2017 às 01:36, Liam Goodacre liamg_uw@hotmail.com escreveu:
You can do this with a "coords" or "donecanvasdialog" message sent to the canvas (ie. using [iemguts/sendcanvas] or [send pd-canvasname.pd]).
I don't remember the arguments exactly, but you can figure them out by opening a .pd file with GOP enabled and then searching for the "coords" line at the bottom. There are 5 or 6 arguments which correspond to GOP dimensions.
*From:* Pd-list pd-list-bounces@lists.iem.at on behalf of Brad Garton garton@columbia.edu *Sent:* 13 May 2017 03:47 *To:* Esteban Viveros *Cc:* pd-list@mail.iem.at *Subject:* Re: [PD] How to map GOP size dynamically
Oh I wish we could...
(and yes I know it's not *that* GOP)
brad
On Fri, May 12, 2017 at 7:50 PM, Esteban Viveros emviveros@gmail.com wrote:
In vanilla can I map the GOP size? I want to resize GOP proportionally.
Thanks any advance!
Cheers Esteban Viveros --
www.estebanviveros.com
Pd-list@lists.iem.at mailing list UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list
Pd-list@lists.iem.at mailing list UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list
--
www.estebanviveros.com _______________________________________________ Pd-list@lists.iem.at mailing list UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list
--
www.estebanviveros.com
--
www.estebanviveros.com _______________________________________________ Pd-list@lists.iem.at mailing list UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list
--
www.estebanviveros.com
Here you go :-)
From: Esteban Viveros emviveros@gmail.com Sent: 16 May 2017 22:47 To: Liam Goodacre; PD list Subject: Re: [PD] How to map GOP size dynamically
Ok! I'm starting to clone kslider object from Max. In Max is possible resize more than one [kslider] simultaneously, so formely I want this feature.
Other game rule is: Cyclone library can be used. :)
I attached the patch I have at this moment.
Em ter, 16 de mai de 2017 às 02:03, Liam Goodacre <liamg_uw@hotmail.commailto:liamg_uw@hotmail.com> escreveu:
Don't give up yet!
The "discard changes..." message is coming because you have made changes to the loaded abstraction, which will be lost if you make changes to the object name. You can "fix" this with a [dirty 0( message, which tricks the patch into thinking that there aren't any unsaved changes. Beware though--this means that if there are any, you'll lose them for good!
You're right--the "coords" message will only come in the patch or sub-patch file where the GOP window is active. All you need to know is the file name of the abstraction that you want to read. Is it just a few specific GOP abstractions that you wish to resize? If so, then it's easy--you just send a [read this-abstraction.pd( message to [text define]. If you want to resize *any* abstraction, then we'll have to think of a way of getting the right filename into the "read" message. This should be possible, but I'd need to know more about what you're doing.
From: Esteban Viveros <emviveros@gmail.commailto:emviveros@gmail.com> Sent: 16 May 2017 03:48
To: Liam Goodacre; PD list Subject: Re: [PD] How to map GOP size dynamically I did a test without success.. When I try to change dimension of my abstraction, pd pops a message 'Discard changes to "abstraction.pd"?'. I'm realizing it's impossible to do what I want in pd vanilla.
I can't find coords in the parent patch.. Only in the abstraction.. If I need to use multiple abstraction I can't see solution.. Well I go ahead without this feature.. :/
Thanks.. Esteban
Em seg, 15 de mai de 2017 às 18:59, Esteban Viveros <emviveros@gmail.commailto:emviveros@gmail.com> escreveu:
Liam... Thanks a lot for hacks..!!! I will try to implement it this week and post results here.
Cheers
Em seg, 15 de mai de 2017 04:07, Liam Goodacre <liamg_uw@hotmail.commailto:liamg_uw@hotmail.com> escreveu:
L2Ork and Purr Data let you retrieve the GOP info with the [canvasinfo] object. Unfortunately, I don't think that there is any conventional way of doing in in Vanilla, but I can think of a hack. You could load the .pd text file itself into a [text] object and then search for the "coords" line, which will be the last one before all of the connections. You could use this to find the GOP area that the patch loaded with (although not any changes that have been made to it since then).
It would be more difficult, though not impossible, to implement this if you are dealing with a sub-patch within a parent-patch. You would also need to use an external if you wanted to detect the filename within the patch, for automatically loading the .pd file.
From: Esteban Viveros <emviveros@gmail.commailto:emviveros@gmail.com> Sent: 13 May 2017 16:07 To: Liam Goodacre; PD list
Subject: Re: [PD] How to map GOP size dynamically Thanks for response...
Liam... I can change dimension of GOP size directly by one number in the proportion I wish. But, in edit mode, I can resize a GOP subtpatch in main patch with mouse. I want to maintain the proportion of rectangle when I slide the right side of my GOP abstraction. About donecanvasdialog message I found:
[donecanvasdialog <x-units> <y-units> <gop> <x-from> <y-from> <x-to> <y-to> <x-size> <y-size> <x-margin> <y-margin>(
For that I'm wanting to receive a message with value of <x-size> of donecanvasdialog message to scale out <y-to> coordinate.
Exist some message to send to $0-gopSubpatch which retrieve me a donecanvasdialog or coords messages arguments..?
Em sáb, 13 de mai de 2017 às 01:36, Liam Goodacre <liamg_uw@hotmail.commailto:liamg_uw@hotmail.com> escreveu:
You can do this with a "coords" or "donecanvasdialog" message sent to the canvas (ie. using [iemguts/sendcanvas] or [send pd-canvasname.pd]).
I don't remember the arguments exactly, but you can figure them out by opening a .pd file with GOP enabled and then searching for the "coords" line at the bottom. There are 5 or 6 arguments which correspond to GOP dimensions.
From: Pd-list <pd-list-bounces@lists.iem.atmailto:pd-list-bounces@lists.iem.at> on behalf of Brad Garton <garton@columbia.edumailto:garton@columbia.edu> Sent: 13 May 2017 03:47 To: Esteban Viveros Cc: pd-list@mail.iem.atmailto:pd-list@mail.iem.at Subject: Re: [PD] How to map GOP size dynamically
Oh I wish we could...
(and yes I know it's not *that* GOP)
brad
On Fri, May 12, 2017 at 7:50 PM, Esteban Viveros <emviveros@gmail.commailto:emviveros@gmail.com> wrote: In vanilla can I map the GOP size? I want to resize GOP proportionally.
Thanks any advance!
Cheers Esteban Viveros --
www.estebanviveros.comhttp://www.estebanviveros.com
Pd-list@lists.iem.atmailto:Pd-list@lists.iem.at mailing list UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list
Pd-list@lists.iem.atmailto:Pd-list@lists.iem.at mailing list UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list --
www.estebanviveros.comhttp://www.estebanviveros.com
Pd-list@lists.iem.atmailto:Pd-list@lists.iem.at mailing list UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list --
www.estebanviveros.comhttp://www.estebanviveros.com
--
www.estebanviveros.comhttp://www.estebanviveros.com
Pd-list@lists.iem.atmailto:Pd-list@lists.iem.at mailing list UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list --
www.estebanviveros.comhttp://www.estebanviveros.com
I like that.. But don't get the target...
I need that: [image: resize.gif] And resizing with mouse map the x-size of kslider abstraction. Basically I need to tell to the abstration I'm clicking in it's GOP. To resize any way I whish. Anyway.. I'm having fun!
Em ter, 16 de mai de 2017 às 22:14, Liam Goodacre liamg_uw@hotmail.com escreveu:
Here you go :-)
*From:* Esteban Viveros emviveros@gmail.com *Sent:* 16 May 2017 22:47
*To:* Liam Goodacre; PD list *Subject:* Re: [PD] How to map GOP size dynamically Ok! I'm starting to clone kslider object from Max. In Max is possible resize more than one [kslider] simultaneously, so formely I want this feature.
Other game rule is: Cyclone library can be used. :)
I attached the patch I have at this moment.
Em ter, 16 de mai de 2017 às 02:03, Liam Goodacre liamg_uw@hotmail.com escreveu:
Don't give up yet!
- The "discard changes..." message is coming because you have made
changes to the loaded abstraction, which will be lost if you make changes to the object name. You can "fix" this with a [dirty 0( message, which tricks the patch into thinking that there aren't any unsaved changes. Beware though--this means that if there are any, you'll lose them for good!
- You're right--the "coords" message will only come in the patch or
sub-patch file where the GOP window is active. All you need to know is the file name of the abstraction that you want to read. Is it just a few specific GOP abstractions that you wish to resize? If so, then it's easy--you just send a [read this-abstraction.pd( message to [text define]. If you want to resize *any* abstraction, then we'll have to think of a way of getting the right filename into the "read" message. This should be possible, but I'd need to know more about what you're doing.
*From:* Esteban Viveros emviveros@gmail.com *Sent:* 16 May 2017 03:48
*To:* Liam Goodacre; PD list *Subject:* Re: [PD] How to map GOP size dynamically I did a test without success.. When I try to change dimension of my abstraction, pd pops a message 'Discard changes to "abstraction.pd"?'. I'm realizing it's impossible to do what I want in pd vanilla.
I can't find coords in the parent patch.. Only in the abstraction.. If I need to use multiple abstraction I can't see solution.. Well I go ahead without this feature.. :/
Thanks.. Esteban
Em seg, 15 de mai de 2017 às 18:59, Esteban Viveros emviveros@gmail.com escreveu:
Liam... Thanks a lot for hacks..!!! I will try to implement it this week and post results here.
Cheers
Em seg, 15 de mai de 2017 04:07, Liam Goodacre liamg_uw@hotmail.com escreveu:
L2Ork and Purr Data let you retrieve the GOP info with the [canvasinfo] object. Unfortunately, I don't think that there is any conventional way of doing in in Vanilla, but I can think of a hack. You could load the .pd text file itself into a [text] object and then search for the "coords" line, which will be the last one before all of the connections. You could use this to find the GOP area that the patch loaded with (although not any changes that have been made to it since then).
It would be more difficult, though not impossible, to implement this if you are dealing with a sub-patch within a parent-patch. You would also need to use an external if you wanted to detect the filename within the patch, for automatically loading the .pd file.
*From:* Esteban Viveros emviveros@gmail.com *Sent:* 13 May 2017 16:07 *To:* Liam Goodacre; PD list
*Subject:* Re: [PD] How to map GOP size dynamically Thanks for response...
Liam... I can change dimension of GOP size directly by one number in the proportion I wish. But, in edit mode, I can resize a GOP subtpatch in main patch with mouse. I want to maintain the proportion of rectangle when I slide the right side of my GOP abstraction. About donecanvasdialog message I found:
[donecanvasdialog <x-units> <y-units> <gop> <x-from> <y-from> <x-to> <y-to> <x-size> <y-size> <x-margin> <y-margin>(
For that I'm wanting to receive a message with value of <x-size> of donecanvasdialog message to scale out <y-to> coordinate.
Exist some message to send to $0-gopSubpatch which retrieve me a donecanvasdialog or coords messages arguments..?
Em sáb, 13 de mai de 2017 às 01:36, Liam Goodacre liamg_uw@hotmail.com escreveu:
You can do this with a "coords" or "donecanvasdialog" message sent to the canvas (ie. using [iemguts/sendcanvas] or [send pd-canvasname.pd]).
I don't remember the arguments exactly, but you can figure them out by opening a .pd file with GOP enabled and then searching for the "coords" line at the bottom. There are 5 or 6 arguments which correspond to GOP dimensions.
*From:* Pd-list pd-list-bounces@lists.iem.at on behalf of Brad Garton garton@columbia.edu *Sent:* 13 May 2017 03:47 *To:* Esteban Viveros *Cc:* pd-list@mail.iem.at *Subject:* Re: [PD] How to map GOP size dynamically
Oh I wish we could...
(and yes I know it's not *that* GOP)
brad
On Fri, May 12, 2017 at 7:50 PM, Esteban Viveros emviveros@gmail.com wrote:
In vanilla can I map the GOP size? I want to resize GOP proportionally.
Thanks any advance!
Cheers Esteban Viveros --
www.estebanviveros.com
Pd-list@lists.iem.at mailing list UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list
Pd-list@lists.iem.at mailing list UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list
--
www.estebanviveros.com _______________________________________________ Pd-list@lists.iem.at mailing list UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list
--
www.estebanviveros.com
--
www.estebanviveros.com _______________________________________________ Pd-list@lists.iem.at mailing list UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list
--
www.estebanviveros.com _______________________________________________ Pd-list@lists.iem.at mailing list UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list
Ah, I see. Unfortunately, that's going to be very difficult. I did manage to get my Context patch to work with mouse resizing (see https://github.com/LGoodacre/context-sequencer), but it was a very long and involved process.
So far as I can tell, there is no way of sensing the GOP-resizing function that you've recorded in the gif. (If you can prove me wrong, I'll be very happy!) Instead, you have to get the mouse position data using [iemguts/receivecanvas], calculate when the mouse hangs over the edge, sense the mouse clicks, and then feed the data into a "coords" message.
You might be able to take the Context patch and strip it down until you're left with only the elements used to re-size, then fill it back in with whatever you want, but even this task wouldn't be easy.
Wish I could be more helpful here...
From: Esteban Viveros emviveros@gmail.com Sent: 17 May 2017 03:47 To: Liam Goodacre; PD list Subject: Re: [PD] How to map GOP size dynamically
I like that.. But don't get the target...
I need that: [resize.gif] And resizing with mouse map the x-size of kslider abstraction. Basically I need to tell to the abstration I'm clicking in it's GOP. To resize any way I whish. Anyway.. I'm having fun!
Em ter, 16 de mai de 2017 às 22:14, Liam Goodacre <liamg_uw@hotmail.commailto:liamg_uw@hotmail.com> escreveu:
Here you go :-)
From: Esteban Viveros <emviveros@gmail.commailto:emviveros@gmail.com> Sent: 16 May 2017 22:47
To: Liam Goodacre; PD list Subject: Re: [PD] How to map GOP size dynamically Ok! I'm starting to clone kslider object from Max. In Max is possible resize more than one [kslider] simultaneously, so formely I want this feature.
Other game rule is: Cyclone library can be used. :)
I attached the patch I have at this moment.
Em ter, 16 de mai de 2017 às 02:03, Liam Goodacre <liamg_uw@hotmail.commailto:liamg_uw@hotmail.com> escreveu:
Don't give up yet!
The "discard changes..." message is coming because you have made changes to the loaded abstraction, which will be lost if you make changes to the object name. You can "fix" this with a [dirty 0( message, which tricks the patch into thinking that there aren't any unsaved changes. Beware though--this means that if there are any, you'll lose them for good!
You're right--the "coords" message will only come in the patch or sub-patch file where the GOP window is active. All you need to know is the file name of the abstraction that you want to read. Is it just a few specific GOP abstractions that you wish to resize? If so, then it's easy--you just send a [read this-abstraction.pd( message to [text define]. If you want to resize *any* abstraction, then we'll have to think of a way of getting the right filename into the "read" message. This should be possible, but I'd need to know more about what you're doing.
From: Esteban Viveros <emviveros@gmail.commailto:emviveros@gmail.com> Sent: 16 May 2017 03:48
To: Liam Goodacre; PD list Subject: Re: [PD] How to map GOP size dynamically I did a test without success.. When I try to change dimension of my abstraction, pd pops a message 'Discard changes to "abstraction.pd"?'. I'm realizing it's impossible to do what I want in pd vanilla.
I can't find coords in the parent patch.. Only in the abstraction.. If I need to use multiple abstraction I can't see solution.. Well I go ahead without this feature.. :/
Thanks.. Esteban
Em seg, 15 de mai de 2017 às 18:59, Esteban Viveros <emviveros@gmail.commailto:emviveros@gmail.com> escreveu:
Liam... Thanks a lot for hacks..!!! I will try to implement it this week and post results here.
Cheers
Em seg, 15 de mai de 2017 04:07, Liam Goodacre <liamg_uw@hotmail.commailto:liamg_uw@hotmail.com> escreveu:
L2Ork and Purr Data let you retrieve the GOP info with the [canvasinfo] object. Unfortunately, I don't think that there is any conventional way of doing in in Vanilla, but I can think of a hack. You could load the .pd text file itself into a [text] object and then search for the "coords" line, which will be the last one before all of the connections. You could use this to find the GOP area that the patch loaded with (although not any changes that have been made to it since then).
It would be more difficult, though not impossible, to implement this if you are dealing with a sub-patch within a parent-patch. You would also need to use an external if you wanted to detect the filename within the patch, for automatically loading the .pd file.
From: Esteban Viveros <emviveros@gmail.commailto:emviveros@gmail.com> Sent: 13 May 2017 16:07 To: Liam Goodacre; PD list
Subject: Re: [PD] How to map GOP size dynamically Thanks for response...
Liam... I can change dimension of GOP size directly by one number in the proportion I wish. But, in edit mode, I can resize a GOP subtpatch in main patch with mouse. I want to maintain the proportion of rectangle when I slide the right side of my GOP abstraction. About donecanvasdialog message I found:
[donecanvasdialog <x-units> <y-units> <gop> <x-from> <y-from> <x-to> <y-to> <x-size> <y-size> <x-margin> <y-margin>(
For that I'm wanting to receive a message with value of <x-size> of donecanvasdialog message to scale out <y-to> coordinate.
Exist some message to send to $0-gopSubpatch which retrieve me a donecanvasdialog or coords messages arguments..?
Em sáb, 13 de mai de 2017 às 01:36, Liam Goodacre <liamg_uw@hotmail.commailto:liamg_uw@hotmail.com> escreveu:
You can do this with a "coords" or "donecanvasdialog" message sent to the canvas (ie. using [iemguts/sendcanvas] or [send pd-canvasname.pd]).
I don't remember the arguments exactly, but you can figure them out by opening a .pd file with GOP enabled and then searching for the "coords" line at the bottom. There are 5 or 6 arguments which correspond to GOP dimensions.
From: Pd-list <pd-list-bounces@lists.iem.atmailto:pd-list-bounces@lists.iem.at> on behalf of Brad Garton <garton@columbia.edumailto:garton@columbia.edu> Sent: 13 May 2017 03:47 To: Esteban Viveros Cc: pd-list@mail.iem.atmailto:pd-list@mail.iem.at Subject: Re: [PD] How to map GOP size dynamically
Oh I wish we could...
(and yes I know it's not *that* GOP)
brad
On Fri, May 12, 2017 at 7:50 PM, Esteban Viveros <emviveros@gmail.commailto:emviveros@gmail.com> wrote: In vanilla can I map the GOP size? I want to resize GOP proportionally.
Thanks any advance!
Cheers Esteban Viveros --
www.estebanviveros.comhttp://www.estebanviveros.com
Pd-list@lists.iem.atmailto:Pd-list@lists.iem.at mailing list UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list
Pd-list@lists.iem.atmailto:Pd-list@lists.iem.at mailing list UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list --
www.estebanviveros.comhttp://www.estebanviveros.com
Pd-list@lists.iem.atmailto:Pd-list@lists.iem.at mailing list UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list --
www.estebanviveros.comhttp://www.estebanviveros.com
--
www.estebanviveros.comhttp://www.estebanviveros.com
Pd-list@lists.iem.atmailto:Pd-list@lists.iem.at mailing list UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list --
www.estebanviveros.comhttp://www.estebanviveros.com
Pd-list@lists.iem.atmailto:Pd-list@lists.iem.at mailing list UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list --
www.estebanviveros.comhttp://www.estebanviveros.com
-
Brad Garton -
Esteban Viveros -
Liam Goodacre