IFTTT (“if this then that”) and connecting puredata to iot device like a wemo or other open source power outlet
Greetings
I would like to connect and have Puredata control an iot device like wemo or other open source power outlet are there any examples or suggestions on where to start?
I was thinking an example would be just to have Puredata turn off and on a power outlet (like a Wemo) using OSC or midi controls. The question I have is how do I connect Puredata to a iot power outlet to do this and which open source power outlet will allow this?
our hackerspace uses a ton of 'sonoff' products from itead ; https://www.itead.cc/sonoff-wifi-wireless-switch.html its a simple and cheap esp8266 based board you can run anything you want on. i -think- it comes with some firmware natively, but i've never bothered to look at it :P
the firmware we flash on them allows them to be controlled over MQTT which works nice for our domotica setup, but i've also flashed one with art-net software once. some manual attempt is at https://nurdspace.nl/SonOff
many ways to apply this ;)
Looks like they are clamping down on flashing the firmware... https://support.itead.cc/support/solutions/articles/11000061914-how-can-i-do...
How can I downgrade the firmware/flash 3rd party through OTA? Created by: Maggie Wang
Modified on: Tue, 6 Nov, 2018 at 2:44 PM
Flashing 3rd party through OTA is not supported officially. It was a bug instead of a feature before firmware v1.6, and the bug was fix since firmware v2.0. As a result, downgrading the firmware is not available as well. Please kindly note that downgrading the firmware/flashing 3rd party through OTA can cause unexpected malfunction of the device, and in this case we won't provide after-sale support and the consequences are users' responsibility.
And we don't give any option suggestion for integration of Sonoff to third party Home Automation systems
On Mon, Jan 14, 2019 at 10:16 AM Bastiaan van den Berg buzz@spacedout.nl wrote:
our hackerspace uses a ton of 'sonoff' products from itead ; https://www.itead.cc/sonoff-wifi-wireless-switch.html its a simple and cheap esp8266 based board you can run anything you want on. i -think- it comes with some firmware natively, but i've never bothered to look at it :P
the firmware we flash on them allows them to be controlled over MQTT which works nice for our domotica setup, but i've also flashed one with art-net software once. some manual attempt is at https://nurdspace.nl/SonOff
many ways to apply this ;) _______________________________________________ Pd-list@lists.iem.at mailing list UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list
On Mon, Jan 14, 2019 at 7:20 PM RT ratulloch@gmail.com wrote:
Looks like they are clamping down on flashing the firmware... https://support.itead.cc/support/solutions/articles/11000061914-how-can-i-do...
nope, thats about the OTA functionality of the preflashed firmware (which i never cared about in the first place)
A demo how to send MQTT to PD via python script: https://www.youtube.com/watch?v=xi1GyC05VXk https://www.youtube.com/watch?v=xi1GyC05VXk
On 14 Jan 2019, at 15:06, RT ratulloch@gmail.com wrote:
Greetings
I would like to connect and have Puredata control an iot device like wemo or other open source power outlet are there any examples or suggestions on where to start?
I was thinking an example would be just to have Puredata turn off and on a power outlet (like a Wemo) using OSC or midi controls. The question I have is how do I connect Puredata to a iot power outlet to do this and which open source power outlet will allow this?
--
|======================================================| _______________________________________________ Pd-list@lists.iem.at mailing list UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list
Thanks guys that helped a lot I plan on going with the Shelly 1 the firmware can be easily flashed supports AC but also supports 12V DC and 24-60V DC and has MQTT support built in. https://shelly.cloud/shelly1-open-source/ It does cost more it's about 10 euros but it fits my needs.
Thanks for the help
On Mon, Jan 14, 2019 at 10:24 AM michael strohmann itsnotfair9@gmail.com wrote:
A demo how to send MQTT to PD via python script: https://www.youtube.com/watch?v=xi1GyC05VXk
On 14 Jan 2019, at 15:06, RT ratulloch@gmail.com wrote:
Greetings
I would like to connect and have Puredata control an iot device like wemo or other open source power outlet are there any examples or suggestions on where to start?
I was thinking an example would be just to have Puredata turn off and on a power outlet (like a Wemo) using OSC or midi controls. The question I have is how do I connect Puredata to a iot power outlet to do this and which open source power outlet will allow this?
--
|======================================================| _______________________________________________ Pd-list@lists.iem.at mailing list UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list
Good luck RT, please share your results:)
On Wed, 16 Jan 2019 at 07:57, RT ratulloch@gmail.com wrote:
Thanks guys that helped a lot I plan on going with the Shelly 1 the firmware can be easily flashed supports AC but also supports 12V DC and 24-60V DC and has MQTT support built in. https://shelly.cloud/shelly1-open-source/ It does cost more it's about 10 euros but it fits my needs.
Thanks for the help
On Mon, Jan 14, 2019 at 10:24 AM michael strohmann itsnotfair9@gmail.com wrote:
A demo how to send MQTT to PD via python script: https://www.youtube.com/watch?v=xi1GyC05VXk
On 14 Jan 2019, at 15:06, RT ratulloch@gmail.com wrote:
Greetings
I would like to connect and have Puredata control an iot device like wemo or other open source power outlet are there any examples or suggestions on where to start?
I was thinking an example would be just to have Puredata turn off and on a power outlet (like a Wemo) using OSC or midi controls. The question I have is how do I connect Puredata to a iot power outlet to do this and which open source power outlet will allow this?
--
|======================================================| _______________________________________________ Pd-list@lists.iem.at mailing list UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list
Pd-list@lists.iem.at mailing list UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list
Julian just got it all working today. In the process of making a full video tutorial along with how to connect the electronics and I will post it to youtube along with notifying the list.
On Thu, Jan 17, 2019 at 4:40 AM Julian Brooks jbeezez@gmail.com wrote:
Good luck RT, please share your results:)
On Wed, 16 Jan 2019 at 07:57, RT ratulloch@gmail.com wrote:
Thanks guys that helped a lot I plan on going with the Shelly 1 the firmware can be easily flashed supports AC but also supports 12V DC and 24-60V DC and has MQTT support built in. https://shelly.cloud/shelly1-open-source/ It does cost more it's about 10 euros but it fits my needs.
Thanks for the help
On Mon, Jan 14, 2019 at 10:24 AM michael strohmann itsnotfair9@gmail.com wrote:
A demo how to send MQTT to PD via python script: https://www.youtube.com/watch?v=xi1GyC05VXk
On 14 Jan 2019, at 15:06, RT ratulloch@gmail.com wrote:
Greetings
I would like to connect and have Puredata control an iot device like wemo or other open source power outlet are there any examples or suggestions on where to start?
I was thinking an example would be just to have Puredata turn off and on a power outlet (like a Wemo) using OSC or midi controls. The question I have is how do I connect Puredata to a iot power outlet to do this and which open source power outlet will allow this?
--
|======================================================| _______________________________________________ Pd-list@lists.iem.at mailing list UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list
Pd-list@lists.iem.at mailing list UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list
The video tutorial is taking longer than expected, camera issues. I made a little write up with images along with including the Pd. https://forum.pdpatchrepo.info/topic/11893/getting-shelly-1-device-to-work-w...
#N canvas 428 236 806 697 10; #X floatatom 303 622 0 0 0 0 - - -; #X obj 329 203 fudiformat; #X obj 331 255 t l l; #X obj 359 293 list length; #X obj 361 325 - 2; #X obj 326 364 list split; #X obj 150 495 list prepend send; #X obj 153 533 list trim; #X obj 325 568 netsend -b; #X obj 148 444 list append 13 10 13 10; #X obj 390 234 print; #X obj 432 206 print; #X msg 343 159 GET /relay/0/?turn=$1 HTTP/1.0; #X obj 430 22 tgl 15 0 empty toggle_on_off empty 17 7 0 10 -24198 -1 -1 0 1; #X msg 45 40 ; toggle_on_off color 16 , 1; #X msg 47 85 ; toggle_on_off color 13 , 0; #X obj 435 57 select 1; #X msg 435 90 on; #X msg 472 89 off; #X obj 436 122 symbol; #X obj 322 396 t a b; #X msg 345 451 disconnect , connect 192.168.1.200 80; #X connect 1 0 2 0; #X connect 1 0 10 0; #X connect 2 0 5 0; #X connect 2 1 3 0; #X connect 3 0 4 0; #X connect 4 0 5 1; #X connect 5 0 20 0; #X connect 6 0 7 0; #X connect 7 0 8 0; #X connect 8 0 0 0; #X connect 9 0 6 0; #X connect 12 0 1 0; #X connect 12 0 11 0; #X connect 13 0 16 0; #X connect 16 0 17 0; #X connect 16 1 18 0; #X connect 17 0 19 0; #X connect 18 0 19 0; #X connect 19 0 12 0; #X connect 20 0 9 0; #X connect 20 1 21 0; #X connect 21 0 8 0;
On Thu, Jan 17, 2019 at 4:40 AM Julian Brooks jbeezez@gmail.com wrote:
Good luck RT, please share your results:)
On Wed, 16 Jan 2019 at 07:57, RT ratulloch@gmail.com wrote:
Thanks guys that helped a lot I plan on going with the Shelly 1 the firmware can be easily flashed supports AC but also supports 12V DC and 24-60V DC and has MQTT support built in. https://shelly.cloud/shelly1-open-source/ It does cost more it's about 10 euros but it fits my needs.
Thanks for the help
On Mon, Jan 14, 2019 at 10:24 AM michael strohmann itsnotfair9@gmail.com wrote:
A demo how to send MQTT to PD via python script: https://www.youtube.com/watch?v=xi1GyC05VXk
On 14 Jan 2019, at 15:06, RT ratulloch@gmail.com wrote:
Greetings
I would like to connect and have Puredata control an iot device like wemo or other open source power outlet are there any examples or suggestions on where to start?
I was thinking an example would be just to have Puredata turn off and on a power outlet (like a Wemo) using OSC or midi controls. The question I have is how do I connect Puredata to a iot power outlet to do this and which open source power outlet will allow this?
--
|======================================================| _______________________________________________ Pd-list@lists.iem.at mailing list UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list
Pd-list@lists.iem.at mailing list UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list
-
Bastiaan van den Berg -
Julian Brooks -
michael strohmann -
RT