Thanks Roman It works perfect! this is the way how it works for me (winxp, pd 0.40.3 ext): audio-properties; pd audio-dialog A 0 0 0 B 0 0 0 C 0 0 0 D 0 0 0 E F where: A = input device B = channels in C = output device D = channels out E = sample rate F = delay (msec) (all the letters must be changed by numbers!) and with midi: midi-properties pd midi-dialog A 0 0 0 B 0 0 0 C D where: A = input devide B = output device C = ?? D = ??? (all the letters must be changed by numbers!!) maybe there are some differences in other platforms I hope this info will be usefull (attached patch) thanks again sf > From: reduzierer@yahoo.de> To: pd-list@iem.at> Date: Sun, 7 Sep 2008 20:05:49 +0200> Subject: Re: [PD] select audio & midi from patch> > hi svend> > you can send some message to [s pd] to change sound and midi settings.> those messages aren't documented anywhere, though (is that correct?).> however, you could do the following:> > [r pd]> |> [print settings]> > then go the menu, choose your settings and hit <ok> and you will see> some output. write the output to a [messagebox( (separate each line with> a comma), which is connected to [s pd] and bang the> [messagebox( whenever you like to restore those exact settings.> > with a bit of playing around, you might be able to figure out, what each> number in the message is used for. then you would be able to compose> correct messages without using the above hack.> > roman> > roman> On Sat, 2008-09-06 at 18:11 -0400, svend foyn wrote:> > Hi list > > > > It's possible to view and change the audio settings from a patch? and> > with midi settings?? > > I was looking for the internal messages, but there is nothing with> > audio & midi. > > I hope there's a way to do it.> > > > Thanks!> > sf > > > > > > ______________________________________________________________________> > Lo que hay dentro de ti es lo que cuenta - ¿Qué tipo de atleta eres?> > _______________________________________________> > Pd-list@iem.at mailing list> > UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list%3E > > > ___________________________________________________________ > Telefonate ohne weitere Kosten vom PC zum PC: http://messenger.yahoo.de%3E > > _______________________________________________> Pd-list@iem.at mailing list> UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list _________________________________________________________________
If you get inspired, it would be great to have a working Pd patch demo to include in the documentation. It would work well in the 'pd-msg' documentation in Browser -> manuals -> pd-msg
Just submit a patch to the patch tracker and I'll happily include it.
http://sourceforge.net/tracker/?group_id=55736&atid=478072
.hc
On Sun, 7 Sep 2008, svend foyn wrote:
Thanks Roman It works perfect! this is the way how it works for me (winxp, pd 0.40.3 ext): audio-properties; pd audio-dialog A 0 0 0 B 0 0 0 C 0 0 0 D 0 0 0 E F where: A = input device B = channels in C = output device D = channels out E = sample rate F = delay (msec) (all the letters must be changed by numbers!) and with midi: midi-properties pd midi-dialog A 0 0 0 B 0 0 0 C D where: A = input devide B = output device C = ?? D = ??? (all the letters must be changed by numbers!!) maybe there are some differences in other platforms I hope this info will be usefull (attached patch) thanks again sf > From: reduzierer@yahoo.de> To: pd-list@iem.at> Date: Sun, 7 Sep 2008 20:05:49 +0200> Subject: Re: [PD] select audio & midi from patch> > hi svend> > you can send some message to [s pd] to change sound and midi settings.> those messages aren't documented anywhere, though (is that correct?).> however, you could do the following:> > [r pd]> |> [print settings]> > then go the menu, choose your settings and hit <ok> and you will see> some output. write the output to a [messagebox( (separate each line with> a comma), which is connected to [s pd] and bang the> [messagebox( whenever you like to restore those exact settings.> > with a bit of playing around, you might be able to figure out, what each> number in the message is used for. then you would be able to compose> correct messages without using the above hack.> > roman> > roman> On Sat, 2008-09-06 at 18:11 -0400, svend foyn wrote:> > Hi list > > > > It's possible to view and change the audio settings from a patch? and> > with midi settings?? > > I was looking for the internal messages, but there is nothing with> > audio & midi. > > I hope there's a way to do it.> > > > Thanks!> > sf > > > > > > ______________________________________________________________________> > Lo que hay dentro de ti es lo que cuenta - ¿Qué tipo de atleta eres?> > _______________________________________________> > Pd-list@iem.at mailing list> > UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list%3E > > > ___________________________________________________________ > Telefonate ohne weitere Kosten vom PC zum PC: http://messenger.yahoo.de%3E > > _______________________________________________> Pd-list@iem.at mailing list> UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list _________________________________________________________________
zen
\
\
\[D[D[D[D
-
Hans-Christoph Steiner -
svend foyn