Hello,
Is there someone who has tested a GigE camera with GEM under Linux or MacOSX ? I have followed the GEM-dev about Prosilica camera and [pix_video] but i can't say if it is working fine or not ? I want to use this camera for an installation on the ceiling in a huge space with a frame rate at 120 fps and a resolution of 640x480 px. Best regards. ++
Jack
On 2010-09-20 15:52, Jack wrote:
Hello,
Is there someone who has tested a GigE camera with GEM under Linux or MacOSX ?
under linux you would need at least the current SVN snapshot for Gem and get yourself either the HALCON or the AVT APIs. then compile Gem, and make sure you get the videoAVT resp. videoHALCON plugins.
since i don't have a prosilica (and nobody has sent me one yet), this is all completely untested.
fgmadr IOhannes
hello,
i have planed to test this soon.
Cyrille
Le 20/09/2010 22:00, IOhannes m zmoelnig a écrit :
On 2010-09-20 15:52, Jack wrote:
Hello,
Is there someone who has tested a GigE camera with GEM under Linux or MacOSX ?
under linux you would need at least the current SVN snapshot for Gem and get yourself either the HALCON or the AVT APIs. then compile Gem, and make sure you get the videoAVT resp. videoHALCON plugins.
since i don't have a prosilica (and nobody has sent me one yet), this is all completely untested.
fgmadr IOhannes
Pd-list@iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list
OK. Cyrille, do you have an idea about the period you want to test your camera ? If i can help, tell me... ++
Jack
Le lundi 20 septembre 2010 à 22:28 +0200, cyrille henry a écrit :
hello,
i have planed to test this soon.
Cyrille
Le 20/09/2010 22:00, IOhannes m zmoelnig a écrit :
On 2010-09-20 15:52, Jack wrote:
Hello,
Is there someone who has tested a GigE camera with GEM under Linux or MacOSX ?
under linux you would need at least the current SVN snapshot for Gem and get yourself either the HALCON or the AVT APIs. then compile Gem, and make sure you get the videoAVT resp. videoHALCON plugins.
since i don't have a prosilica (and nobody has sent me one yet), this is all completely untested.
fgmadr IOhannes
Pd-list@iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list
Pd-list@iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list
i hope to have a cam during the next month. c
Le 21/09/2010 16:15, Jack a écrit :
OK. Cyrille, do you have an idea about the period you want to test your camera ? If i can help, tell me... ++
Jack
Le lundi 20 septembre 2010 à 22:28 +0200, cyrille henry a écrit :
hello,
i have planed to test this soon.
Cyrille
Le 20/09/2010 22:00, IOhannes m zmoelnig a écrit :
On 2010-09-20 15:52, Jack wrote:
Hello,
Is there someone who has tested a GigE camera with GEM under Linux or MacOSX ?
under linux you would need at least the current SVN snapshot for Gem and get yourself either the HALCON or the AVT APIs. then compile Gem, and make sure you get the videoAVT resp. videoHALCON plugins.
since i don't have a prosilica (and nobody has sent me one yet), this is all completely untested.
fgmadr IOhannes
Pd-list@iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list
Pd-list@iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list
hello,
i just have blaster gige cam.
could you be a bit more verbose on what should be installed?
thanks cyrille
Le 20/09/2010 22:00, IOhannes m zmoelnig a écrit :
On 2010-09-20 15:52, Jack wrote:
Hello,
Is there someone who has tested a GigE camera with GEM under Linux or MacOSX ?
under linux you would need at least the current SVN snapshot for Gem and get yourself either the HALCON or the AVT APIs. then compile Gem, and make sure you get the videoAVT resp. videoHALCON plugins.
since i don't have a prosilica (and nobody has sent me one yet), this is all completely untested.
fgmadr IOhannes
Pd-list@iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list
On 2010-09-22 19:11, cyrille henry wrote:
hello,
i just have blaster gige cam.
could you be a bit more verbose on what should be installed?
there are 2 backends in Gem that should support GigE cameras: AVT[1] and halcon[2].
grab either of the sources and compile Gem against it. there are readmeS in Gem/src/plugins/videoAVT/ and Gem/src/plugins/videoHALCON/
mfgasdr IOhannes
[1] AVT: http://www.alliedvisiontec.com/us/products/software/windows/gige-sdk-pvapi.h...
[2] halcon: http://www.halcon.de/halcon/download/ (you can get a free evaluation license key that expires after 30 days; the demo version will not allow you to grab images; so you do need to register)
Hello Iohannes thanks for the answer sorry i missed the readme!
the AVT backend is not compatible with the cam i've got.
Supported cameras: Prosilica GC, GS, GB, GE, GX, Manta
mine is a blaster cam.
the halcon driver look very restrictive. i register, download the pakage. but i did not have a licence. where did you find the 30 day evaluation licence?
thanks a lot Cyrille
Le 22/09/2010 19:44, IOhannes m zmoelnig a écrit :
On 2010-09-22 19:11, cyrille henry wrote:
hello,
i just have blaster gige cam.
could you be a bit more verbose on what should be installed?
there are 2 backends in Gem that should support GigE cameras: AVT[1] and halcon[2].
grab either of the sources and compile Gem against it. there are readmeS in Gem/src/plugins/videoAVT/ and Gem/src/plugins/videoHALCON/
mfgasdr IOhannes
[1] AVT: http://www.alliedvisiontec.com/us/products/software/windows/gige-sdk-pvapi.h...
[2] halcon: http://www.halcon.de/halcon/download/ (you can get a free evaluation license key that expires after 30 days; the demo version will not allow you to grab images; so you do need to register)
Pd-list@iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list
On 2010-09-23 11:36, cyrille henry wrote:
Hello Iohannes thanks for the answer sorry i missed the readme!
the AVT backend is not compatible with the cam i've got.
Supported cameras: Prosilica GC, GS, GB, GE, GX, Manta
mine is a blaster cam.
have you tried, or did you just read the readme? i _think_ that GigE is at least some "standard", so GigE cams should work....
the halcon driver look very restrictive. i register, download the pakage. but i did not have a licence. where did you find the 30 day evaluation licence?
cannot remember exactly, either in one of the readmes that come with the package or on the website http://www.mvtec.com/download/registration.html).
looking into my old emails, it seems like "theImagingSource" contacted my automatically and sent me the key (as well as a CD with the software (again!)) make sure that your cam is supported by halcon...
fgamsdr IOhannes
Le 23/09/2010 12:16, IOhannes m zmoelnig a écrit :
On 2010-09-23 11:36, cyrille henry wrote:
Hello Iohannes thanks for the answer sorry i missed the readme!
the AVT backend is not compatible with the cam i've got.
Supported cameras: Prosilica GC, GS, GB, GE, GX, Manta
mine is a blaster cam.
have you tried, or did you just read the readme?
i tried the included test software, and it did not see my cam.
nusmuk@nusmuk:~/Bureau/AVT GigE SDK/bin-pc/x86$ sudo ./CLIpConfig -l Searching for cameras ... sorry, no camera was detected. Is there any plugged?
with wireshark, i can see some discussion between the computer and the cam.
i _think_ that GigE is at least some "standard", so GigE cams should work....
i would not be surprised that it is a volunteer limitation of this software to use only some GigE cam.
the halcon driver look very restrictive. i register, download the pakage. but i did not have a licence. where did you find the 30 day evaluation licence?
cannot remember exactly, either in one of the readmes that come with the package or on the website http://www.mvtec.com/download/registration.html).
looking into my old emails, it seems like "theImagingSource" contacted my automatically and sent me the key (as well as a CD with the software (again!)) make sure that your cam is supported by halcon...
yes, the blaster cam are listed in the compatibility hardware page. i'll send a mail to the french dealer in order to have a 30 day trial. thanks Cyrille
fgamsdr IOhannes
-
cyrille henry -
IOhannes m zmoelnig -
Jack