i think i fixed the path settings with install_name_tool. i don't have a second macbook to check if it is running on another machine as well.
you can find it on the same place http://www.matthiaskronlachner.com/wp-content/uploads/2011/11/pix_freenect_0...
i'll set up a repo soon so it will be better to get updates.
thanks, matthias
Am 14.11.11 06:00, schrieb Hans-Christoph Steiner:
It'll only work if people have libusb in /usr/local/lib/libusb-1.0.0.dylib since that is where your libfreenect is looking for it.
.hc
On Nov 13, 2011, at 11:24 PM, Matthias Kronlachner wrote:
ah you are right.... thanks. i will have a look at this later on. hope it works on other computers than mine :-)
i compiled libfreenect for myself with audio support... but it seems to be not very stable under osx.
yes, would be good to work together to get a real stable libfreenect object.
matthias
ps.: sorry for confusion with your name, it's late...or early... i'll correct that :-)
Am 14.11.11 04:57, schrieb Hans-Christoph Steiner:
Hey,
Good news! Perhaps Budi and you can join forces, unless there is a reason to have different libfreenect objects. About the Mac OS X binary, it looks like you're not using Fink for libfreenect, so the embed-MacOSX-dependencies.sh script didn't work. That script looks for the /sw path of Fink. If you run these commands and compare them to the fux_kinect, you'll see the differences in the libfreenect and libusb references:
otool -L pix_freenect.pd_darwin otool -L libfreenect.0.0.1.dylib otool -L libusb-1.0.0.dylib
.hc
On Nov 13, 2011, at 10:48 PM, Matthias Kronlachner wrote:
hi!
finally i found some time to update my pix_freenect external for interfacing with the kinect sensor.
you can find source code and binaries (osx, ubuntu 11.10) here: http://www.matthiaskronlachner.com/wp-content/uploads/2011/11/pix_freenect_0...
major changes:
- output rgb and depth stream simultaneously, plus 4 channel audio samples as list on linux (audio from libfreenect is still experimental....)
- uses libfreenect v0.1 -> not backward compatible!!
- binary for osx -> thanks to hans-christian steiner for makefiles i found from fux_kinect...
- accelerator and tilt angle output
- different depth output modes (raw for distance measurement)
you have to toggle a led, tilt or accelerator output after starting rendering to start the streams - don't really know why but i will try to fix that.
i tested it with two kinects under ubuntu and osx and it worked fine.
for using audio you have to build libfreenect with audio (default it is off!) and put the audio.bin into pix_freenect folder.
have fun and please report bugs.
matthias
ps.: sorry for not continuing the plugin for pix_video framework but in case of the kinect it is quite difficult with the 2 streams you get plus the audio stream.
Pd-list@iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list
"A cellphone to me is just an opportunity to be irritated wherever you are." - Linus Torvalds
"It is convenient to imagine a power beyond us because that means we don't have to examine our own lives.", from "The Idols of Environmentalism", by Curtis White
That one works for me in terms of the linking. I could package the latest libfreenect for Fink/unstable if that would be helpful, just tell me how you built it and I'll do it.
.hc
On Nov 14, 2011, at 7:43 PM, Matthias Kronlachner wrote:
i think i fixed the path settings with install_name_tool. i don't have a second macbook to check if it is running on another machine as well.
you can find it on the same place http://www.matthiaskronlachner.com/wp-content/uploads/2011/11/pix_freenect_0...
i'll set up a repo soon so it will be better to get updates.
thanks, matthias
Am 14.11.11 06:00, schrieb Hans-Christoph Steiner:
It'll only work if people have libusb in /usr/local/lib/libusb-1.0.0.dylib since that is where your libfreenect is looking for it.
.hc
On Nov 13, 2011, at 11:24 PM, Matthias Kronlachner wrote:
ah you are right.... thanks. i will have a look at this later on. hope it works on other computers than mine :-)
i compiled libfreenect for myself with audio support... but it seems to be not very stable under osx.
yes, would be good to work together to get a real stable libfreenect object.
matthias
ps.: sorry for confusion with your name, it's late...or early... i'll correct that :-)
Am 14.11.11 04:57, schrieb Hans-Christoph Steiner:
Hey,
Good news! Perhaps Budi and you can join forces, unless there is a reason to have different libfreenect objects. About the Mac OS X binary, it looks like you're not using Fink for libfreenect, so the embed-MacOSX-dependencies.sh script didn't work. That script looks for the /sw path of Fink. If you run these commands and compare them to the fux_kinect, you'll see the differences in the libfreenect and libusb references:
otool -L pix_freenect.pd_darwin otool -L libfreenect.0.0.1.dylib otool -L libusb-1.0.0.dylib
.hc
On Nov 13, 2011, at 10:48 PM, Matthias Kronlachner wrote:
hi!
finally i found some time to update my pix_freenect external for interfacing with the kinect sensor.
you can find source code and binaries (osx, ubuntu 11.10) here: http://www.matthiaskronlachner.com/wp-content/uploads/2011/11/pix_freenect_0...
major changes:
- output rgb and depth stream simultaneously, plus 4 channel audio samples as list on linux (audio from libfreenect is still experimental....)
- uses libfreenect v0.1 -> not backward compatible!!
- binary for osx -> thanks to hans-christian steiner for makefiles i found from fux_kinect...
- accelerator and tilt angle output
- different depth output modes (raw for distance measurement)
you have to toggle a led, tilt or accelerator output after starting rendering to start the streams - don't really know why but i will try to fix that.
i tested it with two kinects under ubuntu and osx and it worked fine.
for using audio you have to build libfreenect with audio (default it is off!) and put the audio.bin into pix_freenect folder.
have fun and please report bugs.
matthias
ps.: sorry for not continuing the plugin for pix_video framework but in case of the kinect it is quite difficult with the 2 streams you get plus the audio stream.
Pd-list@iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list
"A cellphone to me is just an opportunity to be irritated wherever you are." - Linus Torvalds
"It is convenient to imagine a power beyond us because that means we don't have to examine our own lives.", from "The Idols of Environmentalism", by Curtis White
If you are not part of the solution, you are part of the problem.
-
Hans-Christoph Steiner -
Matthias Kronlachner