My problem has been solved by running alsamixer with flags to
Delta-1010LT, and raising input levels there. So, if indeed you (tim) have exactly the same problem, then this should solve it.
Hi Jaime,
when running alsamixer like this: alsamixer -D hw:1 I can set the adc sliders for the Delta-1010LT from there. problem solved, thanks!
Tim
J
On Sun, Nov 9, 2008 at 10:30 AM, Miller Puckette
mpuckett@imusic1.ucsd.edu wrote:
Wierd. I have out-of-the-box Fedora 9 running (it's a terrible Fedora release, by hte way, I'm going to switch to 10 when it comes out
later
this month) and my delta1010LT runs fine. So if it's an ALSA
bug it
must have been fixed meanwhile. BTW, there are 4 jumpers on the 1010LT card; if they are missing
the first
two inputs might not work (but the other 6 should anyway.) cheers Miller On Sun, Nov 09, 2008 at 04:56:48PM +0100, tim wrote: > hello Jamie and list, > > exact same problem here. > Delta1010LT outputs work, inputs don't. > I tried on ubuntu hardy and pure:dyne. > I checked all there is to check in envy24 control. > btw, There are also other problems showing up with alsa lately. > For example, the Echo Layla 3G stopped working altogether. > I'll try Bryan's suggestions later... > > Tim > > On Sun, 2008-11-09 at 12:36 +0100, Bryan Jurish wrote: > > morning Jaime, > > > > I have the same card in my desktop here under debian
testing/unstable,
> > and have also successfully used all the analog in- and
outputs with pd.
> > > > The only potential causes for your problem that occur to me
are "stupid"
> > ones that you've probably already checked, e.g. routing
problems on the
> > card [have you run "envy24control" and checked that the
input levels
> > (tab page "analog volume") are all up where they should be?]
Did you
> > start pd with "-channels 8"? > > > > I also vaguely remember hearing of problems with the alsa
mixer API
> > (alsamixer, amixer, etc.) for envy24 cards -- the
conventional wisdom
> > seems to be: "avoid ALSA's mixer and use only envy24control
for this
> > card". You might also check whether your distro is doing
something
> > sneaky like calling "amixer" behind your back when the
driver module
> > (snd_ice1712) is loaded (e.g. as a post-install operation
declared in
> > /etc/modules.conf)... other than that, I'm pretty much out
of ideas...
I haven't found any file /etc/modules.conf, but I did find /etc/asound.conf
#SWCONF #DEV 0 defaults.pcm.card 0 defaults.pcm.device 0 defaults.ctl.card 0
> > > > marmosets, > > Bryan > > > > On 2008-11-09 09:06:25, "Jaime Oliver"
jaime.oliver2@gmail.com appears
> > to have written: > > > Hello all, > > > > > > I have an M-Audio Delta 1010LT in Fedora 8. I never
installed any
> > > drivers since it seemed to work right out of the box. I
have managed to
> > > use the 8 channels OUT, but can't get a signal into pd in
any of the 8
> > > channels IN. Has anyone else seen something like this? > > > > > > best, > > > > > > J > > > > > > -- > > > Jaime E Oliver LR > > > > > > joliverl@ucsd.edu <mailto:joliverl@ucsd.edu> > > > www.realidadvisual.org/jaimeoliver > > > <http://www.realidadvisual.org/jaimeoliver> > > > www-crca.ucsd.edu/ <http://www-crca.ucsd.edu/> > > > www.realidadvisual.org <http://www.realidadvisual.org> > > > > > > 858 202 1522 > > > 9168 Regents Rd. Apt. G > > > La Jolla, CA 92037 > > > USA > > > -- > ................................... > www.timvets.net > info@timvets.net, timvets@gmail.com > 0032 474 89 66 86 > skype: tim167_ > ................................... > > > _______________________________________________ > Pd-list@iem.at mailing list > UNSUBSCRIBE and account-management ->
http://lists.puredata.info/listinfo/pd-list
_______________________________________________ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management ->
http://lists.puredata.info/listinfo/pd-list
-- Jaime E Oliver LR
joliverl@ucsd.edu www.realidadvisual.org/jaimeoliver www-crca.ucsd.edu/ www.realidadvisual.org
858 202 1522 9168 Regents Rd. Apt. G La Jolla, CA 92037 USA
--
................................... www.timvets.net info@timvets.net, timvets@gmail.com 0032 474 89 66 86 skype: tim167_ ...................................