I spent a bunch of hours on these builds. Could someone confirms that test8 works ?
---------- Forwarded message ---------- Date: Sat, 19 Feb 2011 13:09:16 -0500 (EST) From: Mathieu Bouchard matju@artengine.ca To: gridflow-dev@artengine.ca Subject: Re: time to test 9.13 on osx-intel
On Sat, 19 Feb 2011, Mathieu Bouchard wrote:
http://gridflow.ca/download/packages/gridflow-9.13-macosx104-i386-test7.tar....
test6 fixed libiconv and libintl support on OSX 10.4.
test7 fixed png read/write (libpng version conflict... 1.2 vs 1.4)
I still haven't got back libcv support (it was included in GF 9.9 - 9.12)
http://gridflow.ca/download/packages/gridflow-9.13-macosx104-i386-test8.tar....
test8 builds with libcv again.
as an exercise, try loading doc/flow_classes/cv/#SVD-help.pd and make sure that clicking on the messagebox does output three grids. You should see 3.60555 in the first one.
| Mathieu Bouchard ---- tél: +1.514.383.3801 ---- Villeray, Montréal, QC
Just gave it a go. I get this message when Pd starts:
/Library/Pd/gridflow/gridflow.pd_darwin: dlopen(/Library/Pd/gridflow/gridflow.pd_darwin, 10): Library not loaded: /sw/lib/libpng14.14.dylib Referenced from: /Library/Pd/gridflow/gridflow.pd_darwin Reason: image not found gridflow: can't load library
.mmb
On Sat, Feb 19, 2011 at 1:41 PM, Mathieu Bouchard matju@artengine.ca wrote:
I spent a bunch of hours on these builds. Could someone confirms that test8 works ?
---------- Forwarded message ---------- Date: Sat, 19 Feb 2011 13:09:16 -0500 (EST) From: Mathieu Bouchard matju@artengine.ca To: gridflow-dev@artengine.ca Subject: Re: time to test 9.13 on osx-intel
On Sat, 19 Feb 2011, Mathieu Bouchard wrote:
http://gridflow.ca/download/packages/gridflow-9.13-macosx104-i386-test7.tar....
test6 fixed libiconv and libintl support on OSX 10.4.
test7 fixed png read/write (libpng version conflict... 1.2 vs 1.4)
I still haven't got back libcv support (it was included in GF 9.9 - 9.12)
http://gridflow.ca/download/packages/gridflow-9.13-macosx104-i386-test8.tar....
test8 builds with libcv again.
as an exercise, try loading doc/flow_classes/cv/#SVD-help.pd and make sure that clicking on the messagebox does output three grids. You should see 3.60555 in the first one.
_______________________________________________________________________ | Mathieu Bouchard ---- tél: +1.514.383.3801 ---- Villeray, Montréal, QC _______________________________________________ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list
On Sat, 19 Feb 2011, Mike Moser-Booth wrote:
Just gave it a go. I get this message when Pd starts:
/Library/Pd/gridflow/gridflow.pd_darwin: dlopen(/Library/Pd/gridflow/gridflow.pd_darwin, 10): Library not loaded: /sw/lib/libpng14.14.dylib Referenced from: /Library/Pd/gridflow/gridflow.pd_darwin Reason: image not found gridflow: can't load library
In test8 I reverted the png fix by accident. I fixed it back in test9 :
http://gridflow.ca/download/packages/gridflow-9.13-macosx104-i386-test9.tar....
try again (please)
| Mathieu Bouchard ---- tél: +1.514.383.3801 ---- Villeray, Montréal, QC
Still get the same error. :-(
.mmb
On Sat, Feb 19, 2011 at 7:50 PM, Mathieu Bouchard matju@artengine.ca wrote:
On Sat, 19 Feb 2011, Mike Moser-Booth wrote:
Just gave it a go. I get this message when Pd starts:
/Library/Pd/gridflow/gridflow.pd_darwin: dlopen(/Library/Pd/gridflow/gridflow.pd_darwin, 10): Library not loaded: /sw/lib/libpng14.14.dylib Referenced from: /Library/Pd/gridflow/gridflow.pd_darwin Reason: image not found gridflow: can't load library
In test8 I reverted the png fix by accident. I fixed it back in test9 :
http://gridflow.ca/download/packages/gridflow-9.13-macosx104-i386-test9.tar....
try again (please)
_______________________________________________________________________ | Mathieu Bouchard ---- tél: +1.514.383.3801 ---- Villeray, Montréal, QC
On Sat, 19 Feb 2011, Mike Moser-Booth wrote:
Still get the same error. :-(
ok, that was because I was linking with both the correct libpng and the wrong libpng. This is fixed, as well as another linkage problem (libiconv in libintl).
http://gridflow.ca/download/packages/gridflow-9.13-macosx104-i386-test10.tar...
| Mathieu Bouchard ---- tél: +1.514.383.3801 ---- Villeray, Montréal, QC
The libpng error is gone, but now I get this one:
/Library/Pd/gridflow/gridflow.pd_darwin: dlopen(/Library/Pd/gridflow/gridflow.pd_darwin, 10): Library not loaded: /Users/pddev/.../lib/libcxcore.2.dylib Referenced from: /Library/Pd/gridflow/libs/libcv.2.dylib Reason: image not found gridflow: can't load library
.mmb
On Sat, Feb 19, 2011 at 11:04 PM, Mathieu Bouchard matju@artengine.ca wrote:
On Sat, 19 Feb 2011, Mike Moser-Booth wrote:
Still get the same error. :-(
ok, that was because I was linking with both the correct libpng and the wrong libpng. This is fixed, as well as another linkage problem (libiconv in libintl).
http://gridflow.ca/download/packages/gridflow-9.13-macosx104-i386-test10.tar...
_______________________________________________________________________ | Mathieu Bouchard ---- tél: +1.514.383.3801 ---- Villeray, Montréal, QC
On Sun, 20 Feb 2011, Mike Moser-Booth wrote:
The libpng error is gone, but now I get this one:
/Library/Pd/gridflow/gridflow.pd_darwin: dlopen(/Library/Pd/gridflow/gridflow.pd_darwin, 10): Library not loaded: /Users/pddev/.../lib/libcxcore.2.dylib Referenced from: /Library/Pd/gridflow/libs/libcv.2.dylib Reason: image not found gridflow: can't load library
http://gridflow.ca/download/packages/gridflow-9.13-macosx104-i386-test11.tar...
| Mathieu Bouchard ---- tél: +1.514.383.3801 ---- Villeray, Montréal, QC
Success! Screenshot attached.
.mmb
On Sun, Feb 20, 2011 at 12:30 AM, Mathieu Bouchard matju@artengine.ca wrote:
On Sun, 20 Feb 2011, Mike Moser-Booth wrote:
The libpng error is gone, but now I get this one:
/Library/Pd/gridflow/gridflow.pd_darwin: dlopen(/Library/Pd/gridflow/gridflow.pd_darwin, 10): Library not loaded: /Users/pddev/.../lib/libcxcore.2.dylib Referenced from: /Library/Pd/gridflow/libs/libcv.2.dylib Reason: image not found gridflow: can't load library
http://gridflow.ca/download/packages/gridflow-9.13-macosx104-i386-test11.tar...
_______________________________________________________________________ | Mathieu Bouchard ---- tél: +1.514.383.3801 ---- Villeray, Montréal, QC
-- Mike Moser-Booth mmoserbooth@gmail.com
On Sun, 20 Feb 2011, Mike Moser-Booth wrote:
Success! Screenshot attached.
Alright. I overwrote gridflow-9.13-macosx104-i386.tar.gz (test5) with test11, and I deleted test6,7,8,9,10. If there are no bug reports about this build now, we'll call it a release.
Thank you.
| Mathieu Bouchard ---- tél: +1.514.383.3801 ---- Villeray, Montréal, QC
On Sun, 20 Feb 2011, Mathieu Bouchard wrote:
On Sun, 20 Feb 2011, Mike Moser-Booth wrote:
Success! Screenshot attached.
Alright. I overwrote gridflow-9.13-macosx104-i386.tar.gz (test5) with test11, and I deleted test6,7,8,9,10. If there are no bug reports about this build now, we'll call it a release.
gridflow-9.13-macosx104-i386.tar.gz is now test12. I hope that this is the last one. This fixes the priority order between [#io.quicktimeapple] and [#io.quicktimehw] for the file suffix association of "*.mov".
http://gridflow.ca/download/packages/gridflow-9.13-macosx104-i386.tar.gz
| Mathieu Bouchard ---- tél: +1.514.383.3801 ---- Villeray, Montréal, QC
On Sun, 20 Feb 2011, Mathieu Bouchard wrote:
On Sun, 20 Feb 2011, Mathieu Bouchard wrote:
On Sun, 20 Feb 2011, Mike Moser-Booth wrote:
Success! Screenshot attached.
Alright. I overwrote gridflow-9.13-macosx104-i386.tar.gz (test5) with test11, and I deleted test6,7,8,9,10. If there are no bug reports about this build now, we'll call it a release.
gridflow-9.13-macosx104-i386.tar.gz is now test12. I hope that this is the last one. This fixes the priority order between [#io.quicktimeapple] and [#io.quicktimehw] for the file suffix association of "*.mov".
http://gridflow.ca/download/packages/gridflow-9.13-macosx104-i386.tar.gz
and test13 replaces test12, reintroducing PDP support (oops).
| Mathieu Bouchard ---- tél: +1.514.383.3801 ---- Villeray, Montréal, QC
-
Mathieu Bouchard -
Mike Moser-Booth