Hi,
I just spent about 30-40 minutes trying to figure out how to get a
writable svn checkout.
Is there any way someone could add that info to one of the multiple
pages that try to instruct you to get the source?
http://puredata.info/docs/developer/GettingPdSource
http://puredata.info/docs/developer/SourceRepositories
http://puredata.info/docs/developer/SVNCommitAccess
For developers like myself who only make occasional commits,
something like this would really help. There are too many version
control systems and frameworks to remember how to do everything,
everywhere. A few simple command line examples would really help.
thank you -august.
How about I write it in an email, and you try it. If it works for
you, add it to those wiki pages with the fresh newbie's perspective.
I think this should work:
svn co --username myname https://pure-data.svn.sourceforge.net/svnroot/pure-data/trunk/
- --username is your sourceforge username
- it must be httpS when you are doing it writable
.hc
On Sep 21, 2010, at 8:56 PM, august wrote:
Hi,
I just spent about 30-40 minutes trying to figure out how to get a writable svn checkout.
Is there any way someone could add that info to one of the multiple pages that try to instruct you to get the source?
http://puredata.info/docs/developer/GettingPdSource http://puredata.info/docs/developer/SourceRepositories http://puredata.info/docs/developer/SVNCommitAccess
For developers like myself who only make occasional commits, something like this would really help. There are too many version control systems and frameworks to remember how to do everything, everywhere. A few simple command line examples would really help.
thank you -august.
Pd-list@iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list
¡El pueblo unido jamás será vencido!
Done.
How about I write it in an email, and you try it. If it works for you, add it to those wiki pages with the fresh newbie's perspective.
I think this should work:
svn co --username myname https://pure-data.svn.sourceforge.net/svnroot/pure-data/trunk/
- --username is your sourceforge username
- it must be httpS when you are doing it writable
.hc
On Sep 21, 2010, at 8:56 PM, august wrote:
Hi,
I just spent about 30-40 minutes trying to figure out how to get a writable svn checkout.
Is there any way someone could add that info to one of the multiple pages that try to instruct you to get the source?
http://puredata.info/docs/developer/GettingPdSource http://puredata.info/docs/developer/SourceRepositories http://puredata.info/docs/developer/SVNCommitAccess
For developers like myself who only make occasional commits, something like this would really help. There are too many version control systems and frameworks to remember how to do everything, everywhere. A few simple command line examples would really help.
thank you -august.
Awesome, thanks. I wouldn't have known where to put the info in a way that's most useful.
.hc
Hello
I have a stupid question
how to create in a textfile blank line between 2 lines with [msgfile]
or [textfile]
thanks
p
On 09/24/2010 08:14 AM, philippe boisnard wrote:
Hello
I have a stupid question
i have a clever question: do you think it would be possible to strat a new thread, when you start a new topic? this is how i do it: if i want to comment on something somebody has said on the list i use the "reply" (and relatives: usually "reply list") button in my mail-client. if i have a new question, i click on "new" and add "pd-list@iem.at" as the address (when i'm lazy, i navigate to a pd-list mail, and right-click on the mail-address and select "compose mail to".
you can learn why this makes sense in "pd-list's terms of agreement" at: http://puredata.info/community/lists/Netiquette
how to create in a textfile blank line between 2 lines with [msgfile] or [textfile]
by adding an empty line with [add( (no arguments)
mfgar IOhannes
Hey IOhannes,
I am guessing you wrote about starting a new thread because this
thread got bunched in with another in your mailer. I never reply,
then change the subject unless its a reply, I've noticed on a number
of occasions that my threads will get bunched in with others. Also,
my mailer did not bunch this one in with any other threads.
So I think the culprit is bugs in the threading of your mailer.
.hc
On Sep 24, 2010, at 4:14 AM, IOhannes zmölnig wrote:
On 09/24/2010 08:14 AM, philippe boisnard wrote:
Hello
I have a stupid question
i have a clever question: do you think it would be possible to strat a new thread, when you
start a new topic? this is how i do it: if i want to comment on something somebody has
said on the list i use the "reply" (and relatives: usually "reply list") button in my mail-client. if i have a new question, i click on "new"
and add "pd-list@iem.at" as the address (when i'm lazy, i navigate to a pd-list mail, and right-click on the mail-address and select "compose mail to".you can learn why this makes sense in "pd-list's terms of agreement"
at: http://puredata.info/community/lists/Netiquettehow to create in a textfile blank line between 2 lines with
[msgfile] or [textfile]by adding an empty line with [add( (no arguments)
mfgar IOhannes
Pd-list@iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list
If you are not part of the solution, you are part of the problem.
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
On 09/24/2010 03:24 PM, Hans-Christoph Steiner wrote:
Hey IOhannes,
I am guessing you wrote about starting a new thread because this thread got bunched in with another in your mailer. I never reply, then change the subject unless its a reply, I've noticed on a number of occasions that my threads will get bunched in with others. Also, my mailer did not bunch this one in with any other threads.
So I think the culprit is bugs in the threading of your mailer.
thanks for pointing this possibility out, and if so i'm indeed deeply ashamed.
nevertheless, i find this in the headers of philippe's email: in-reply-to: 1285270921.27764.1396575561@webmail.messagingengine.com
clearly referencing your email about "svn co...documentation" (at least my mta shows this message-id for your email)
(the problem is with philippe's email on "blank lines with textfile/msgfile" which was in reply to your mail about svn documentation)
mfgsdsdt IOhannes
I've made that mistake before. You got Icedove, and I've got Sylpheed and think they have a similar sloppy way of bunching by subject line.
On Fri, 24 Sep 2010 16:32:37 +0200 IOhannes m zmölnig zmoelnig@iem.at wrote:
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
On 09/24/2010 03:24 PM, Hans-Christoph Steiner wrote:
Hey IOhannes,
I am guessing you wrote about starting a new thread because this thread got bunched in with another in your mailer. I never reply, then change the subject unless its a reply, I've noticed on a number of occasions that my threads will get bunched in with others. Also, my mailer did not bunch this one in with any other threads.
So I think the culprit is bugs in the threading of your mailer.
thanks for pointing this possibility out, and if so i'm indeed deeply ashamed.
nevertheless, i find this in the headers of philippe's email: in-reply-to: 1285270921.27764.1396575561@webmail.messagingengine.com
clearly referencing your email about "svn co...documentation" (at least my mta shows this message-id for your email)
(the problem is with philippe's email on "blank lines with textfile/msgfile" which was in reply to your mail about svn documentation)
mfgsdsdt IOhannes -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.10 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/
iEYEARECAAYFAkyctoUACgkQkX2Xpv6ydvS2lwCfX4NT9Clxv5/0VDBilNPHs4Ms v0kAn1Ltni76CEMeiO13tg+I+dsRf+ru =Mdtk -----END PGP SIGNATURE-----
Pd-list@iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list
Hello
i have a clever question: do you think it would be possible to strat a new thread, when you
start a new topic? this is how i do it: if i want to comment on something somebody has
said on the list i use the "reply" (and relatives: usually "reply list") button in my mail-client. if i have a new question, i click on
"new" and add "pd-list@iem.at" as the address (when i'm lazy, i navigate to a pd-list mail, and right-click on the mail-address and select "compose mail to".
sorry, but I believe that my mail was only for the pd-list, and not
with you in cc.
It's certainy an error of me
how to create in a textfile blank line between 2 lines with
[msgfile] or [textfile]by adding an empty line with [add( (no arguments)
My problem was that when I read a .srt with [msgfill], all blank line
was cuted, and after when I rewrite the text, I did not manage to
insert blank lines
But I have choosen an other way to realize a random mix of video and
subtitle in VLC, with [system] and applescript.
I document the atch and I share.
best regards
p
On Sep 24, 2010, at 6:05 PM, philippe boisnard wrote:
Hello
i have a clever question: do you think it would be possible to strat a new thread, when you
start a new topic? this is how i do it: if i want to comment on something somebody
has said on the list i use the "reply" (and relatives: usually "reply list") button in my mail-client. if i have a new question, i click on
"new" and add "pd-list@iem.at" as the address (when i'm lazy, i navigate to a pd-list mail, and right-click on the mail-address and select
"compose mail to".sorry, but I believe that my mail was only for the pd-list, and not
with you in cc. It's certainy an error of mehow to create in a textfile blank line between 2 lines with
[msgfile] or [textfile]by adding an empty line with [add( (no arguments)
My problem was that when I read a .srt with [msgfill], all blank
line was cuted, and after when I rewrite the text, I did not manage
to insert blank lines But I have choosen an other way to realize a random mix of video and
subtitle in VLC, with [system] and applescript. I document the atch and I share.best regards
You might try the [srtfile] object that Maira Sala, IOhannes, and me
worked on, its not totally done, but should work to some degree:
.hc
Access to computers should be unlimited and total. - the hacker ethic
Hi
For applescript command
for exemple to change .srt used by VLC [it was my problem : to create
an automat for a random_mix of .srt in VLC]
[open document file "XXXXXX.srt" of folder [set the name of file "XXXXXX.srt" to "XXXXXX1.srt"( "Desktop" of folder "philippsnard" of folder "Users" I of startup disk using application file "TextEdit.app" of I folder "Applications" of startup disk] I I I I I I I I I I__________________________________________________I [list] I [l2s] I [osascript -e 'tell application "Finder" to $1' &( I [system]
I finish the patch, and I share in the list.
p
Le 24 sept. 10 à 08:14, philippe boisnard a écrit :
Hello
I have a stupid question how to create in a textfile blank line between 2 lines with
[msgfile] or [textfile]thanks
p
Pd-list@iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list
-
Andy Farnell -
august -
Hans-Christoph Steiner -
IOhannes m zmölnig -
IOhannes zmölnig
-
philippe boisnard