i have placed the files on the web at http://www.rpi.edu/~ardelg/
you will see a two directories, one for pd 34 and one for pd 35 test 11 . i had some issues with the grid working on both 34 and 35 when compiled with 34 libraries and source so that is the reason there are two verions on there . these dll's were compiled with VS .NET if any one was curious to know .
joge .
----- Original Message ----- From: "Matthew Nish-Lapidus" mattn-l@rogers.com To: "joge ." gboy@nycap.rr.com Sent: Monday, February 25, 2002 9:25 PM Subject: Re: [PD] pianoroll on nt .
hi,
would i be able to get a copt of the compiled object for win? i really
want
to try it out, but i don't know how to port it myself.
matt.
----- Original Message ----- From: "joge ." gboy@nycap.rr.com To: pd-list@iem.kug.ac.at Sent: Monday, February 25, 2002 2:45 AM Subject: Re: [PD] pianoroll on nt .
hehe ,.. ok i got it working now .. i did some investigating [reading]
and
i
began to understand the problem of exporting a funtion ...
thanks .
joge .
----- Original Message ----- From: "joge ." gboy@nycap.rr.com To: pd-list@iem.kug.ac.at Sent: Monday, February 25, 2002 1:04 AM Subject: Re: [PD] pianoroll on nt .
thanks for the responce . i am not sure i understand what you mean by the #ifdef ? why would i
need
that ? wouldnt that only make sense if i was using c++ ? i am not
too
familiar with programming dll's . i should clarified by saying that i am tring to get Yves pianoroll
object
to
compile on nt .
thanks .
joge .
----- Original Message ----- From: "mark" mark@junklight.com To: "joge ." gboy@nycap.rr.com; pd-list@iem.kug.ac.at Sent: Sunday, February 24, 2002 3:42 PM Subject: RE: [PD] pianoroll on nt .
make sure you are exporting the function "pianoroll_setup" properly. If you have a working library there you should be able to find the syntax - I haven't got it here I'm on the wrong machine.
its something like:
#ifdef __C++_SYMBOL__ (find out what this is ) extern "C" { #endif
__declspec(dllexport) setup_function()
#ifdef __C++_SYMBOL__ (find out what this is ) } #endif
cheers
mark
-----Original Message----- From: joge . [mailto:gboy@nycap.rr.com] Sent: 24 February 2002 19:50 To: pd-list@iem.kug.ac.at Subject: [PD] pianoroll on nt .
hi ,
i just got the pianoroll.dll compiled on my machine [i used the
workspace
from idelay~ and modifed the dependences and some names]. any how ,
now
i
try to load it into pd [both 34 and 35] and i says it can't find the "pianoroll_setup" symbol .
here is the exact message :
load_object: Symbol "pianoroll_setup" not found pianoroll: can't load library
anybody know what this might be. i read some earlier posts that the
code
itself should work fine on both linux and windows, only the
compilation
is
different.
oh yeah.. and to get it to compile using the pd 34 libraries i had
to
change
one of the variable names that seems to have changed in pd 35.
i got idelay~ compiled and running fine on my machine so i am not
sure
what
the problem could be .
any help would be greatly appreciated .
joge .
hi,
i have placed the files on the web at http://www.rpi.edu/~ardelg/
you will see a two directories, one for pd 34 and one for pd 35 test 11 .
good effort !! but the real distinction is between :
pd < 0.35test5
and
pd >= 0.35 test5
i had some issues with the grid working on both 34 and 35 when compiled
with
34 libraries and source so that is the reason there are two verions on
there
. these dll's were compiled with VS .NET if any one was curious to know .
uh, so do the externs set .NET cookies ??? [joke]
cheers,
Yves/
terrific! thanks for doing this! I'm seeing one bug with the piano roll on win2k. I can't test it under linux since there are no linux Gina drivers so I thought I'd report it in this thread. The piano roll highlists the current step as it goes forwards, but if I manually back it up it it leaves all the sliders highlighted as it goes back.
Thanks again you guys, this and the grid about are really really slick
-Josh
On Mon, 25 Feb 2002, joge . wrote:
i have placed the files on the web at http://www.rpi.edu/~ardelg/
you will see a two directories, one for pd 34 and one for pd 35 test 11 . i had some issues with the grid working on both 34 and 35 when compiled with 34 libraries and source so that is the reason there are two verions on there . these dll's were compiled with VS .NET if any one was curious to know .
joge .
----- Original Message ----- From: "Matthew Nish-Lapidus" mattn-l@rogers.com To: "joge ." gboy@nycap.rr.com Sent: Monday, February 25, 2002 9:25 PM Subject: Re: [PD] pianoroll on nt .
hi,
would i be able to get a copt of the compiled object for win? i really
want
to try it out, but i don't know how to port it myself.
matt.
----- Original Message ----- From: "joge ." gboy@nycap.rr.com To: pd-list@iem.kug.ac.at Sent: Monday, February 25, 2002 2:45 AM Subject: Re: [PD] pianoroll on nt .
hehe ,.. ok i got it working now .. i did some investigating [reading]
and
i
began to understand the problem of exporting a funtion ...
thanks .
joge .
----- Original Message ----- From: "joge ." gboy@nycap.rr.com To: pd-list@iem.kug.ac.at Sent: Monday, February 25, 2002 1:04 AM Subject: Re: [PD] pianoroll on nt .
thanks for the responce . i am not sure i understand what you mean by the #ifdef ? why would i
need
that ? wouldnt that only make sense if i was using c++ ? i am not
too
familiar with programming dll's . i should clarified by saying that i am tring to get Yves pianoroll
object
to
compile on nt .
thanks .
joge .
----- Original Message ----- From: "mark" mark@junklight.com To: "joge ." gboy@nycap.rr.com; pd-list@iem.kug.ac.at Sent: Sunday, February 24, 2002 3:42 PM Subject: RE: [PD] pianoroll on nt .
make sure you are exporting the function "pianoroll_setup" properly. If you have a working library there you should be able to find the syntax - I haven't got it here I'm on the wrong machine.
its something like:
#ifdef __C++_SYMBOL__ (find out what this is ) extern "C" { #endif
__declspec(dllexport) setup_function()
#ifdef __C++_SYMBOL__ (find out what this is ) } #endif
cheers
mark
-----Original Message----- From: joge . [mailto:gboy@nycap.rr.com] Sent: 24 February 2002 19:50 To: pd-list@iem.kug.ac.at Subject: [PD] pianoroll on nt .
hi ,
i just got the pianoroll.dll compiled on my machine [i used the
workspace
from idelay~ and modifed the dependences and some names]. any how ,
now
i
try to load it into pd [both 34 and 35] and i says it can't find the "pianoroll_setup" symbol .
here is the exact message :
load_object: Symbol "pianoroll_setup" not found pianoroll: can't load library
anybody know what this might be. i read some earlier posts that the
code
itself should work fine on both linux and windows, only the
compilation
is
different.
oh yeah.. and to get it to compile using the pd 34 libraries i had
to
change
one of the variable names that seems to have changed in pd 35.
i got idelay~ compiled and running fine on my machine so i am not
sure
what
the problem could be .
any help would be greatly appreciated .
joge .
Josh .. Yoshi .. Joschi .. xiphoidprocess.com .. eds.org/~joschi
-
joge . -
Josh Steiner -
Yves Degoyon