Hi.. I was trying to compile the pdp_opencv for pd-extended 0.42.5 on ubuntu 10.04-i386 but the configure script makes me some troubles ... it needs the --with-pd=/bla/bla parameter for the sources of pd, but when given it says that the option -with-pd is unrecognized, and complain later that "pd sources tree not found, install it and use the --with-pd=<path> config option ".....
so something seems wrong in the configure script but I can't fix it myself like that ... any hints?
thanks a lot,
(I wanted first to try the binaries but artefacte.org times out ... )
Ol. ogeem.be okno.be
Well i tested opencv with ubuntu 9.04 and .deb, works very fine, maybe you can try with .deb...in the open cv Hangar site.
I tested in Os x 10.5.8 and works, in snow leopard i installed Pd 0.4.1.4... not working with Snow Leopard release cv (IME)...Works with old Pd.
http://www.hangar.org/wikis/lab/doku.php?id=start:puredata_opencv
Check .deb and good luck!
José
2010/11/10 Olm-e ol@ogeem.be
Hi.. I was trying to compile the pdp_opencv for pd-extended 0.42.5 on ubuntu 10.04-i386 but the configure script makes me some troubles ... it needs the --with-pd=/bla/bla parameter for the sources of pd, but when given it says that the option -with-pd is unrecognized, and complain later that "pd sources tree not found, install it and use the --with-pd=<path> config option ".....
so something seems wrong in the configure script but I can't fix it myself like that ... any hints?
thanks a lot,
(I wanted first to try the binaries but artefacte.org times out ... )
Ol. ogeem.be okno.be
Pd-list@iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list
thanks but ... I still can't ping from here artefacte.org (91.121.76.110) where the .deb are (as said before) and still can't build pix_opencv nor pdp_opencv from source (obviously taken on the hangar wiki ;) ) with same error :
$ ./configure --with-pd=/home/myname/pd-src/Pd-0.42.5-extended/pd configure: WARNING: unrecognized option : --with-pd [...] looking for pd-sources (required) ... pd source tree not found... install it and use the --with-pd=<path> configuration option. $_
(here pdp_opencv source path is not given but it's the same and it stops before to check)
thanks for the attention anyway
Ol. ogeem.be okno.be
Jose Luis Santorcuato wrote:
Well i tested opencv with ubuntu 9.04 and .deb, works very fine, maybe you can try with .deb...in the open cv Hangar site.
I tested in Os x 10.5.8 and works, in snow leopard i installed Pd 0.4.1.4... not working with Snow Leopard release cv (IME)...Works with old Pd.
http://www.hangar.org/wikis/lab/doku.php?id=start:puredata_opencv
Check .deb and good luck!
José
2010/11/10 Olm-e <ol@ogeem.be mailto:ol@ogeem.be>
Hi.. I was trying to compile the pdp_opencv for pd-extended 0.42.5 on ubuntu 10.04-i386 but the configure script makes me some troubles ... it needs the --with-pd=/bla/bla parameter for the sources of pd, but when given it says that the option -with-pd is unrecognized, and complain later that "pd sources tree not found, install it and use the --with-pd=<path> config option "..... so something seems wrong in the configure script but I can't fix it myself like that ... any hints? thanks a lot, (I wanted first to try the binaries but artefacte.org <http://artefacte.org> times out ... ) Ol. ogeem.be <http://ogeem.be> okno.be <http://okno.be> _______________________________________________ Pd-list@iem.at <mailto:Pd-list@iem.at> mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list-- http://arselectronicachile.blogspot.com http://comunicacionnativa.blogspot.com/ http://www.myspace.com/santorcuato
Al 11/11/10 00:43, En/na Olm-e ha escrit:
thanks but ... I still can't ping from here artefacte.org (91.121.76.110) where the .deb are (as said before) and still can't build pix_opencv nor pdp_opencv from source (obviously taken on the hangar wiki ;) ) with same error :
artefacte.org is back.
salut, ll.
thanks, I can acces it now :)
pdp_opencv is working from binaries (as expected) but it should be good the source compile too... (to be able to use pix_opencv f.ex.)
have a nice day,
Ol; ogeem.be okno.be
lluis gomez i bigorda wrote:
Al 11/11/10 00:43, En/na Olm-e ha escrit:
thanks but ... I still can't ping from here artefacte.org (91.121.76.110) where the .deb are (as said before) and still can't build pix_opencv nor pdp_opencv from source (obviously taken on the hangar wiki ;) ) with same error :
artefacte.org is back.
salut, ll.
ola,
Olm-e wrote:
thanks but ... I still can't ping from here artefacte.org (91.121.76.110) where the .deb are (as said before)
artefacte.org is now back on line... but the packages there are for pd 0.41-4, so it's not what you need.
you can try pure:dyne packages instead : https://launchpad.net/~puredyne-team/+archive/ppa?field.series_filter=lucid, these packages are for pd 0.42-1
and still can't build pix_opencv nor pdp_opencv from source (obviously taken on the hangar wiki ;) ) with same error :
$ ./configure --with-pd=/home/myname/pd-src/Pd-0.42.5-extended/pd
this is wrong!
obviously these are not the pd source, but binaries..
when we say sources, you need a pd/src folder
in svn you'd have to do :
/Software/pd-svn/trunk/externals/pix_opencv# ./configure --with-pd=../../pd
configure: WARNING: unrecognized option : --with-pd
this is just a warning that you can ignore, if you had the pd sources it would work really
[...] looking for pd-sources (required) ... pd source tree not found... install it and use the --with-pd=<path> configuration option. $_
(here pdp_opencv source path is not given but it's the same and it stops before to check)
thanks for the attention anyway
Ol. ogeem.be okno.be
saludos, sevy
ydegoyon@gmail.com wrote:
ola,
Olm-e wrote:
thanks but ... I still can't ping from here artefacte.org (91.121.76.110) where the .deb are (as said before)
artefacte.org is now back on line... but the packages there are for pd 0.41-4, so it's not what you need.
you can try pure:dyne packages instead : https://launchpad.net/~puredyne-team/+archive/ppa?field.series_filter=lucid,
these packages are for pd 0.42-1
and still can't build pix_opencv nor pdp_opencv from source (obviously taken on the hangar wiki ;) ) with same error :
$ ./configure --with-pd=/home/myname/pd-src/Pd-0.42.5-extended/pd
this is wrong!
obviously these are not the pd source, but binaries..
when we say sources, you need a pd/src folder
in svn you'd have to do :
/Software/pd-svn/trunk/externals/pix_opencv# ./configure --with-pd=../../pd
Hi,
sorry, I am using the source from the tgz, not binaries, and pointing to /home/myname/pd-src/Pd-0.42.5-extended/pd/src give me the same error... (I tried different dir, nothing change... ) I did not build pd since the binary is working well, I was just trying to add opencv to it.
pdp_opencv binaries for 0.41-4 works for me, but I'll try with puredyne packages for pix_opencv... thanks for you time.
Ol;
ogeem.be okno.be
configure: WARNING: unrecognized option : --with-pd
this is just a warning that you can ignore, if you had the pd sources it would work really
[...] looking for pd-sources (required) ... pd source tree not found... install it and use the --with-pd=<path> configuration option. $_
(here pdp_opencv source path is not given but it's the same and it stops before to check)
thanks for the attention anyway
Ol. ogeem.be okno.be
saludos, sevy
ola,
sorry, I am using the source from the tgz, not binaries, and pointing to /home/myname/pd-src/Pd-0.42.5-extended/pd/src give me the same error... (I tried different dir, nothing change... )
well no, don't put /src and obviously pd-extended is not packaged like the usual pd,
the real test is :
if test -f $PD_DIR/src/m_pd.h then AC_SUBST(PD_DIR) echo "ok." else echo "pd source tree not found... install it and use the --with-pd=<path> configuration option." exit -1 fi
the PD_DIR should be /home/myname/pd-src/Pd-0.42.5-extended/pd, but in this you don't have src/m_pd.h...
we said sources of pd, not of pd-extended..
ciao, sevy
ydegoyon@gmail.com wrote:
ola,
sorry, I am using the source from the tgz, not binaries, and pointing to /home/myname/pd-src/Pd-0.42.5-extended/pd/src give me the same error... (I tried different dir, nothing change... )
well no, don't put /src and obviously pd-extended is not packaged like the usual pd,
the real test is :
if test -f $PD_DIR/src/m_pd.h then AC_SUBST(PD_DIR) echo "ok." else echo "pd source tree not found... install it and use the --with-pd=<path> configuration option." exit -1 fi
the PD_DIR should be /home/myname/pd-src/Pd-0.42.5-extended/pd, but in this you don't have src/m_pd.h...
we said sources of pd, not of pd-extended..
ciao, sevy
Ha, ok then,
Thanks for the disembiguation, didn't knew sources where structured differently for pd in extended and vanilla... so I'm trying now with pd vanilla and pdp from separate sources archive...
still binaries for pdp_opencv version pd-0.41.1 works for me to this point ...
cheers,
Ol;
ogeem.be okno.be
-
Jose Luis Santorcuato -
lluis gomez i bigorda -
Olm-e -
ydegoyon＠gmail.com