hola,

well, here you have a bandwidth issue, either your internet connection is not good enough to transmit video ( try to lower the quality in that case ) but, most probably, the giss server is a bit saturated and it doesn't take any more incoming stream.

join the giss channel to see if we can find a solution.

saludos, sevy

Jack wrote:

Hello list, hello Yves, I have a problem with the patch 'giss-2.0.pd' (pd-extended 0.39.3- extended – MacosX.4.11 – X11 1.1.3 – XFree86 4.4.0). I have created a channel on http://giss.tv/. I use a FireWire camera and i see the preview (no problem). When i push the start bang in the emission, 'frames emited' go to 39
or 40 or 41 then stop and Pd freezes during 5 minutes then output :
'shutting down encoder'.

here the output from PD : pdp_theonice~ : setting password to ***** pdp_theonice~ : connecting to http://stream.giss.tv:8000/****.org pdp_theonice~ : connection request but a connection is pending . . .
disconnecting pdp_theonice~ : connection thread 26104523 launched pdp_theonice~ : connecting to port 8000 pdp_theonice~ : logged in to stream.giss.tv pdp_theonice~ : connecting child 26104523 exiting. . . . pdp_theonice~ : initializing encoder. . . pdp_theonice~ : encoder initialized. pdp_theonice~ : writing headers. . . pdp_theonice~ : start streaming at 7 frames/second

(freeze here) then 5 mn later :

pdp_theonice~ : could not write audio packet (ret=-1). pdp_theonice~ : shutting down encoder pdp_theonice~ : could not write audio packet (ret=-1). pdp_theonice~ : could not write audio packet (ret=-1).

Note : it's the same with a quicktime video

any idea ?

Jack _______________________________________________ PD-list@iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list