Dear list,
I planned to move to 0.49-1 as read all about the amazing new features, but unfortunately pd crashes at startup. After next startup it prints: Pd seems to have crashed on startup. (re-save preferences to reinstate them) Re-saving them causes a crash next time either. This means no externals are loaded.
Did anyone had a similar issue? Is there any solution?
Best,
Popesz
Very strange that Pd is called Wish on the top Menu bar, and it has a feather as the icon of Pd. Maybe it has something common with the problem?
On Sat, Nov 24, 2018 at 5:19 PM Csaba Láng langcsaba@gmail.com wrote:
Dear list,
I planned to move to 0.49-1 as read all about the amazing new features, but unfortunately pd crashes at startup. After next startup it prints: Pd seems to have crashed on startup. (re-save preferences to reinstate them) Re-saving them causes a crash next time either. This means no externals are loaded.
Did anyone had a similar issue? Is there any solution?
Best,
Popesz
https://github.com/pure-data/pure-data/issues/506
??
Mensaje telepatico asistido por maquinas.
On 11/24/2018 1:29 PM, Csaba Láng wrote: Very strange that Pd is called Wish on the top Menu bar, and it has a feather as the icon of Pd. Maybe it has something common with the problem?
On Sat, Nov 24, 2018 at 5:19 PM Csaba Láng <langcsaba@gmail.commailto:langcsaba@gmail.com> wrote: Dear list,
I planned to move to 0.49-1 as read all about the amazing new features, but unfortunately pd crashes at startup. After next startup it prints: Pd seems to have crashed on startup. (re-save preferences to reinstate them) Re-saving them causes a crash next time either. This means no externals are loaded.
Did anyone had a similar issue? Is there any solution?
Best,
Popesz
Pd-list@lists.iem.atmailto:Pd-list@lists.iem.at mailing list UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list
Downloaded from here: https://puredata.info/downloads/pure-data the first mac os x link to 64bit the same on Miller's page. Still crashes at load.
On Sat, Nov 24, 2018 at 5:35 PM Lucas Cordiviola lucarda27@hotmail.com wrote:
https://github.com/pure-data/pure-data/issues/506
??
Mensaje telepatico asistido por maquinas.
On 11/24/2018 1:29 PM, Csaba Láng wrote:
Very strange that Pd is called Wish on the top Menu bar, and it has a feather as the icon of Pd. Maybe it has something common with the problem?
On Sat, Nov 24, 2018 at 5:19 PM Csaba Láng langcsaba@gmail.com wrote:
Dear list,
I planned to move to 0.49-1 as read all about the amazing new features, but unfortunately pd crashes at startup. After next startup it prints: Pd seems to have crashed on startup. (re-save preferences to reinstate them) Re-saving them causes a crash next time either. This means no externals are loaded.
Did anyone had a similar issue? Is there any solution?
Best,
Popesz
_______________________________________________Pd-list@lists.iem.at mailing list UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list
Try this one at:
http://msp.ucsd.edu/software.html
Mensaje telepatico asistido por maquinas.
On 11/24/2018 1:40 PM, Csaba Láng wrote: Downloaded from here: https://puredata.info/downloads/pure-data the first mac os x link to 64bit the same on Miller's page. Still crashes at load.
On Sat, Nov 24, 2018 at 5:35 PM Lucas Cordiviola <lucarda27@hotmail.commailto:lucarda27@hotmail.com> wrote:
https://github.com/pure-data/pure-data/issues/506
??
Mensaje telepatico asistido por maquinas.
On 11/24/2018 1:29 PM, Csaba Láng wrote: Very strange that Pd is called Wish on the top Menu bar, and it has a feather as the icon of Pd. Maybe it has something common with the problem?
On Sat, Nov 24, 2018 at 5:19 PM Csaba Láng <langcsaba@gmail.commailto:langcsaba@gmail.com> wrote: Dear list,
I planned to move to 0.49-1 as read all about the amazing new features, but unfortunately pd crashes at startup. After next startup it prints: Pd seems to have crashed on startup. (re-save preferences to reinstate them) Re-saving them causes a crash next time either. This means no externals are loaded.
Did anyone had a similar issue? Is there any solution?
Best,
Popesz
Pd-list@lists.iem.atmailto:Pd-list@lists.iem.at mailing list UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list
Pd-list@lists.iem.atmailto:Pd-list@lists.iem.at mailing list UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list
Lucas,
that is the same mirror. Tried both. When I load a patch created before, all the externals load immediately. But if I open Pd 0.49-1 and just want to patch, no externals are available. Very strange behaviour.
On Sat, Nov 24, 2018 at 5:47 PM Lucas Cordiviola lucarda27@hotmail.com wrote:
Try this one at:
http://msp.ucsd.edu/software.html
Mensaje telepatico asistido por maquinas.
On 11/24/2018 1:40 PM, Csaba Láng wrote:
Downloaded from here: https://puredata.info/downloads/pure-data the first mac os x link to 64bit the same on Miller's page. Still crashes at load.
On Sat, Nov 24, 2018 at 5:35 PM Lucas Cordiviola lucarda27@hotmail.com wrote:
https://github.com/pure-data/pure-data/issues/506
??
Mensaje telepatico asistido por maquinas.
On 11/24/2018 1:29 PM, Csaba Láng wrote:
Very strange that Pd is called Wish on the top Menu bar, and it has a feather as the icon of Pd. Maybe it has something common with the problem?
On Sat, Nov 24, 2018 at 5:19 PM Csaba Láng langcsaba@gmail.com wrote:
Dear list,
I planned to move to 0.49-1 as read all about the amazing new features, but unfortunately pd crashes at startup. After next startup it prints: Pd seems to have crashed on startup. (re-save preferences to reinstate them) Re-saving them causes a crash next time either. This means no externals are loaded.
Did anyone had a similar issue? Is there any solution?
Best,
Popesz
_______________________________________________Pd-list@lists.iem.at mailing list UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list
_______________________________________________Pd-list@lists.iem.at mailing list UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list
On 11/24/2018 1:51 PM, Csaba Láng wrote: Lucas,
that is the same mirror. Tried both. When I load a patch created before, all the externals load immediately. But if I open Pd 0.49-1 and just want to patch, no externals are available. Very strange behaviour. Lets separate the issue(s):
Does it crash?
or
It just not load externals?
Mensaje telepatico asistido por maquinas.
On Sat, Nov 24, 2018 at 5:47 PM Lucas Cordiviola <lucarda27@hotmail.commailto:lucarda27@hotmail.com> wrote:
Try this one at:
http://msp.ucsd.edu/software.html
Mensaje telepatico asistido por maquinas.
On 11/24/2018 1:40 PM, Csaba Láng wrote: Downloaded from here: https://puredata.info/downloads/pure-data the first mac os x link to 64bit the same on Miller's page. Still crashes at load.
On Sat, Nov 24, 2018 at 5:35 PM Lucas Cordiviola <lucarda27@hotmail.commailto:lucarda27@hotmail.com> wrote:
https://github.com/pure-data/pure-data/issues/506
??
Mensaje telepatico asistido por maquinas.
On 11/24/2018 1:29 PM, Csaba Láng wrote: Very strange that Pd is called Wish on the top Menu bar, and it has a feather as the icon of Pd. Maybe it has something common with the problem?
On Sat, Nov 24, 2018 at 5:19 PM Csaba Láng <langcsaba@gmail.commailto:langcsaba@gmail.com> wrote: Dear list,
I planned to move to 0.49-1 as read all about the amazing new features, but unfortunately pd crashes at startup. After next startup it prints: Pd seems to have crashed on startup. (re-save preferences to reinstate them) Re-saving them causes a crash next time either. This means no externals are loaded.
Did anyone had a similar issue? Is there any solution?
Best,
Popesz
Pd-list@lists.iem.atmailto:Pd-list@lists.iem.at mailing list UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list
Pd-list@lists.iem.atmailto:Pd-list@lists.iem.at mailing list UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list
Pd-list@lists.iem.atmailto:Pd-list@lists.iem.at mailing list UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list
On 11/24/18 5:19 PM, Csaba Láng wrote:
Dear list,
I planned to move to 0.49-1 as read all about the amazing new features, but unfortunately pd crashes at startup. After next startup it prints: Pd seems to have crashed on startup. (re-save preferences to reinstate them) Re-saving them causes a crash next time either. This means no externals are loaded.
maybe one of the externals you are loading crashes? try running Pd from the cmdline (possibly with "-stderr") to see what it prints before dying.
gfmdstr IOannes
Here you are:
On Sat, Nov 24, 2018 at 6:08 PM IOhannes m zmölnig zmoelnig@iem.at wrote:
On 11/24/18 5:19 PM, Csaba Láng wrote:
Dear list,
I planned to move to 0.49-1 as read all about the amazing new features,
but
unfortunately pd crashes at startup. After next startup it prints: Pd seems to have crashed on startup. (re-save preferences to reinstate them) Re-saving them causes a crash next time either. This means no externals are loaded.
maybe one of the externals you are loading crashes? try running Pd from the cmdline (possibly with "-stderr") to see what it prints before dying.
gfmdstr IOannes
Pd-list@lists.iem.at mailing list UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list
it is a loop
- crashes at startup
- on second start it prints in the console:
Pd seems to have crashed on startup. (re-save preferences to reinstate them) and no loading externals. Saving all preferences and restarting Pd causes an immediate crash, go back to point 1)
On Sat, Nov 24, 2018 at 6:01 PM Lucas Cordiviola lucarda27@hotmail.com wrote:
On 11/24/2018 1:51 PM, Csaba Láng wrote:
Lucas,
that is the same mirror. Tried both. When I load a patch created before, all the externals load immediately. But if I open Pd 0.49-1 and just want to patch, no externals are available. Very strange behaviour.
Lets separate the issue(s):
Does it crash?
or
It just not load externals?
Mensaje telepatico asistido por maquinas.
On Sat, Nov 24, 2018 at 5:47 PM Lucas Cordiviola lucarda27@hotmail.com wrote:
Try this one at:
http://msp.ucsd.edu/software.html
Mensaje telepatico asistido por maquinas.
On 11/24/2018 1:40 PM, Csaba Láng wrote:
Downloaded from here: https://puredata.info/downloads/pure-data the first mac os x link to 64bit the same on Miller's page. Still crashes at load.
On Sat, Nov 24, 2018 at 5:35 PM Lucas Cordiviola lucarda27@hotmail.com wrote:
https://github.com/pure-data/pure-data/issues/506
??
Mensaje telepatico asistido por maquinas.
On 11/24/2018 1:29 PM, Csaba Láng wrote:
Very strange that Pd is called Wish on the top Menu bar, and it has a feather as the icon of Pd. Maybe it has something common with the problem?
On Sat, Nov 24, 2018 at 5:19 PM Csaba Láng langcsaba@gmail.com wrote:
Dear list,
I planned to move to 0.49-1 as read all about the amazing new features, but unfortunately pd crashes at startup. After next startup it prints: Pd seems to have crashed on startup. (re-save preferences to reinstate them) Re-saving them causes a crash next time either. This means no externals are loaded.
Did anyone had a similar issue? Is there any solution?
Best,
Popesz
_______________________________________________Pd-list@lists.iem.at mailing list UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list
_______________________________________________Pd-list@lists.iem.at mailing list UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list
_______________________________________________Pd-list@lists.iem.at mailing list UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list
I don't know how preferences are handled on macOS and Pd.
Looks to me that when you "disable all externals" this doesn't get saved on the prefs. so you go back to point1)
:(
Mensaje telepatico asistido por maquinas.
On 11/24/2018 2:17 PM, Csaba Láng wrote: it is a loop
- crashes at startup
- on second start it prints in the console:
Pd seems to have crashed on startup. (re-save preferences to reinstate them) and no loading externals. Saving all preferences and restarting Pd causes an immediate crash, go back to point 1)
On Sat, Nov 24, 2018 at 6:01 PM Lucas Cordiviola <lucarda27@hotmail.commailto:lucarda27@hotmail.com> wrote:
On 11/24/2018 1:51 PM, Csaba Láng wrote: Lucas,
that is the same mirror. Tried both. When I load a patch created before, all the externals load immediately. But if I open Pd 0.49-1 and just want to patch, no externals are available. Very strange behaviour. Lets separate the issue(s):
Does it crash?
or
It just not load externals?
Mensaje telepatico asistido por maquinas.
On Sat, Nov 24, 2018 at 5:47 PM Lucas Cordiviola <lucarda27@hotmail.commailto:lucarda27@hotmail.com> wrote:
Try this one at:
http://msp.ucsd.edu/software.html
Mensaje telepatico asistido por maquinas.
On 11/24/2018 1:40 PM, Csaba Láng wrote: Downloaded from here: https://puredata.info/downloads/pure-data the first mac os x link to 64bit the same on Miller's page. Still crashes at load.
On Sat, Nov 24, 2018 at 5:35 PM Lucas Cordiviola <lucarda27@hotmail.commailto:lucarda27@hotmail.com> wrote:
https://github.com/pure-data/pure-data/issues/506
??
Mensaje telepatico asistido por maquinas.
On 11/24/2018 1:29 PM, Csaba Láng wrote: Very strange that Pd is called Wish on the top Menu bar, and it has a feather as the icon of Pd. Maybe it has something common with the problem?
On Sat, Nov 24, 2018 at 5:19 PM Csaba Láng <langcsaba@gmail.commailto:langcsaba@gmail.com> wrote: Dear list,
I planned to move to 0.49-1 as read all about the amazing new features, but unfortunately pd crashes at startup. After next startup it prints: Pd seems to have crashed on startup. (re-save preferences to reinstate them) Re-saving them causes a crash next time either. This means no externals are loaded.
Did anyone had a similar issue? Is there any solution?
Best,
Popesz
Pd-list@lists.iem.atmailto:Pd-list@lists.iem.at mailing list UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list
Pd-list@lists.iem.atmailto:Pd-list@lists.iem.at mailing list UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list
Pd-list@lists.iem.atmailto:Pd-list@lists.iem.at mailing list UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list
Pd-list@lists.iem.atmailto:Pd-list@lists.iem.at mailing list UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list
It looks like there is no permission for saving the preferences. I tried just in case once with sudo, but no differences
On Sat, Nov 24, 2018 at 6:29 PM Lucas Cordiviola lucarda27@hotmail.com wrote:
I don't know how preferences are handled on macOS and Pd.
Looks to me that when you "disable all externals" this doesn't get saved on the prefs. so you go back to point1)
:(
Mensaje telepatico asistido por maquinas.
On 11/24/2018 2:17 PM, Csaba Láng wrote:
it is a loop
- crashes at startup
- on second start it prints in the console:
Pd seems to have crashed on startup. (re-save preferences to reinstate them) and no loading externals. Saving all preferences and restarting Pd causes an immediate crash, go back to point 1)
On Sat, Nov 24, 2018 at 6:01 PM Lucas Cordiviola lucarda27@hotmail.com wrote:
On 11/24/2018 1:51 PM, Csaba Láng wrote:
Lucas,
that is the same mirror. Tried both. When I load a patch created before, all the externals load immediately. But if I open Pd 0.49-1 and just want to patch, no externals are available. Very strange behaviour.
Lets separate the issue(s):
Does it crash?
or
It just not load externals?
Mensaje telepatico asistido por maquinas.
On Sat, Nov 24, 2018 at 5:47 PM Lucas Cordiviola lucarda27@hotmail.com wrote:
Try this one at:
http://msp.ucsd.edu/software.html
Mensaje telepatico asistido por maquinas.
On 11/24/2018 1:40 PM, Csaba Láng wrote:
Downloaded from here: https://puredata.info/downloads/pure-data the first mac os x link to 64bit the same on Miller's page. Still crashes at load.
On Sat, Nov 24, 2018 at 5:35 PM Lucas Cordiviola lucarda27@hotmail.com wrote:
https://github.com/pure-data/pure-data/issues/506
??
Mensaje telepatico asistido por maquinas.
On 11/24/2018 1:29 PM, Csaba Láng wrote:
Very strange that Pd is called Wish on the top Menu bar, and it has a feather as the icon of Pd. Maybe it has something common with the problem?
On Sat, Nov 24, 2018 at 5:19 PM Csaba Láng langcsaba@gmail.com wrote:
Dear list,
I planned to move to 0.49-1 as read all about the amazing new features, but unfortunately pd crashes at startup. After next startup it prints: Pd seems to have crashed on startup. (re-save preferences to reinstate them) Re-saving them causes a crash next time either. This means no externals are loaded.
Did anyone had a similar issue? Is there any solution?
Best,
Popesz
_______________________________________________Pd-list@lists.iem.at mailing list UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list
_______________________________________________Pd-list@lists.iem.at mailing list UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list
_______________________________________________Pd-list@lists.iem.at mailing list UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list
_______________________________________________Pd-list@lists.iem.at mailing list UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list
On 11/24/18 6:14 PM, Csaba Láng wrote:
Here you are:
something's wrong here. i meant the output of the terminal (not the Pd-console). but it seems that you are not starting Pd correctly (as i think you don't get anything on the terminal). should be something like:
- open the terminal
- run (as a single line): /Applications/Pd-0.49-1.app/Contents/Resources/bin/pd -stderr
-verbose 2>&1 | tee pd.log
the log file will be in pd.log
gfmdasr IOhannes
PS: i'd prefer plain-text files (as in the above example) over rtf-files, as i can read them everywhere.
/Applications/Pd-0.49-1.app/Contents/Resources/bin/pd -stderr -verbose 2>&1 | tee pd.log
input channels = 2, output channels = 2
Pd-0.49.1 ("") compiled 09:22:07 Oct 12 2018
port 5400
"/Applications/Pd-0.49-1.app/Contents/Resources/../MacOS/Pd" 5400
Waiting for connection request...
... connected
skipping loading preferences... Pd seems to have crashed on startup.
(re-save preferences to reinstate them)
2018-11-24 19:04:01.591 Pd[11864:88395] Persistent UI failed to open file file://localhost/Users/EMV/Library/Saved%20Application%20State/org.puredata.pd.pd-gui.savedState/window_2.data: Operation not permitted (1)
Apologise, could not locate pd.log
2018-11-24 18:57:15.379 Pd[11530:84397] Persistent UI failed to open file file://localhost/Users/EMV/Library/Saved%20Application%20State/org.puredata.pd.pd-gui.savedState/window_2.data: Operation not permitted (1) On Sat, Nov 24, 2018 at 6:40 PM IOhannes m zmölnig zmoelnig@iem.at wrote:
On 11/24/18 6:14 PM, Csaba Láng wrote:
Here you are:
something's wrong here. i meant the output of the terminal (not the Pd-console). but it seems that you are not starting Pd correctly (as i think you don't get anything on the terminal). should be something like:
- open the terminal
- run (as a single line): /Applications/Pd-0.49-1.app/Contents/Resources/bin/pd -stderr
-verbose 2>&1 | tee pd.log
the log file will be in pd.log
gfmdasr IOhannes
PS: i'd prefer plain-text files (as in the above example) over rtf-files, as i can read them everywhere.
Pd-list@lists.iem.at mailing list UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list
just do:
/Applications/Pd-0.49-1.app/Contents/Resources/bin/pd -stderr -verbose 2>&1 | tee ~/Desktop/pd.log
Then the log is on your desktop
On Sat, Nov 24, 2018 at 1:08 PM Csaba Láng langcsaba@gmail.com wrote:
/Applications/Pd-0.49-1.app/Contents/Resources/bin/pd -stderr -verbose 2>&1 | tee pd.log
input channels = 2, output channels = 2
Pd-0.49.1 ("") compiled 09:22:07 Oct 12 2018
port 5400
"/Applications/Pd-0.49-1.app/Contents/Resources/../MacOS/Pd" 5400
Waiting for connection request...
... connected
skipping loading preferences... Pd seems to have crashed on startup.
(re-save preferences to reinstate them)
2018-11-24 19:04:01.591 Pd[11864:88395] Persistent UI failed to open file file://localhost/Users/EMV/Library/Saved%20Application%20State/org.puredata.pd.pd-gui.savedState/window_2.data: Operation not permitted (1)
Apologise, could not locate pd.log
2018-11-24 18:57:15.379 Pd[11530:84397] Persistent UI failed to open file file://localhost/Users/EMV/Library/Saved%20Application%20State/org.puredata.pd.pd-gui.savedState/window_2.data: Operation not permitted (1) On Sat, Nov 24, 2018 at 6:40 PM IOhannes m zmölnig zmoelnig@iem.at wrote:
On 11/24/18 6:14 PM, Csaba Láng wrote:
Here you are:
something's wrong here. i meant the output of the terminal (not the Pd-console). but it seems that you are not starting Pd correctly (as i think you don't get anything on the terminal). should be something like:
- open the terminal
- run (as a single line): /Applications/Pd-0.49-1.app/Contents/Resources/bin/pd -stderr
-verbose 2>&1 | tee pd.log
the log file will be in pd.log
gfmdasr IOhannes
PS: i'd prefer plain-text files (as in the above example) over rtf-files, as i can read them everywhere.
Pd-list@lists.iem.at mailing list UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list
Pd-list@lists.iem.at mailing list UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list
no difference between the pd.log and the terminal output, but as you wish:
On Sat, Nov 24, 2018 at 7:10 PM me.grimm megrimm@gmail.com wrote:
just do:
/Applications/Pd-0.49-1.app/Contents/Resources/bin/pd -stderr -verbose 2>&1 | tee ~/Desktop/pd.log
Then the log is on your desktop
On Sat, Nov 24, 2018 at 1:08 PM Csaba Láng langcsaba@gmail.com wrote:
/Applications/Pd-0.49-1.app/Contents/Resources/bin/pd -stderr -verbose 2>&1 | tee pd.log
input channels = 2, output channels = 2
Pd-0.49.1 ("") compiled 09:22:07 Oct 12 2018
port 5400
"/Applications/Pd-0.49-1.app/Contents/Resources/../MacOS/Pd" 5400
Waiting for connection request...
... connected
skipping loading preferences... Pd seems to have crashed on startup.
(re-save preferences to reinstate them)
2018-11-24 19:04:01.591 Pd[11864:88395] Persistent UI failed to open file file://localhost/Users/EMV/Library/Saved%20Application%20State/org.puredata.pd.pd-gui.savedState/window_2.data: Operation not permitted (1)
Apologise, could not locate pd.log
2018-11-24 18:57:15.379 Pd[11530:84397] Persistent UI failed to open file file://localhost/Users/EMV/Library/Saved%20Application%20State/org.puredata.pd.pd-gui.savedState/window_2.data: Operation not permitted (1) On Sat, Nov 24, 2018 at 6:40 PM IOhannes m zmölnig zmoelnig@iem.at wrote:
On 11/24/18 6:14 PM, Csaba Láng wrote:
Here you are:
something's wrong here. i meant the output of the terminal (not the Pd-console). but it seems that you are not starting Pd correctly (as i think you don't get anything on the terminal). should be something like:
- open the terminal
- run (as a single line): /Applications/Pd-0.49-1.app/Contents/Resources/bin/pd -stderr
-verbose 2>&1 | tee pd.log
the log file will be in pd.log
gfmdasr IOhannes
PS: i'd prefer plain-text files (as in the above example) over rtf-files, as i can read them everywhere.
Pd-list@lists.iem.at mailing list UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list
Pd-list@lists.iem.at mailing list UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list
-- ____________________ m.e.grimm, m.f.a, ed.m. cornell u., tc3 megrimm.net ____________________
you try?
rm /Users/EMV/Library/Preferences/org.puredata.pd.pd-gui.plist && rm /Users/EMV/Library/Preferences/org.puredata.pd.plist
and maybe
rm -r /Users/EMV/Library/Saved\ Application
State/org.puredata.pd.pd-gui.savedState/
you also might want to try repairing your disk permissions... something on you system is fucked
:)
On Sat, Nov 24, 2018 at 1:31 PM Csaba Láng langcsaba@gmail.com wrote:
no difference between the pd.log and the terminal output, but as you wish:
On Sat, Nov 24, 2018 at 7:10 PM me.grimm megrimm@gmail.com wrote:
just do:
/Applications/Pd-0.49-1.app/Contents/Resources/bin/pd -stderr -verbose 2>&1 | tee ~/Desktop/pd.log
Then the log is on your desktop
On Sat, Nov 24, 2018 at 1:08 PM Csaba Láng langcsaba@gmail.com wrote:
/Applications/Pd-0.49-1.app/Contents/Resources/bin/pd -stderr -verbose 2>&1 | tee pd.log
input channels = 2, output channels = 2
Pd-0.49.1 ("") compiled 09:22:07 Oct 12 2018
port 5400
"/Applications/Pd-0.49-1.app/Contents/Resources/../MacOS/Pd" 5400
Waiting for connection request...
... connected
skipping loading preferences... Pd seems to have crashed on startup.
(re-save preferences to reinstate them)
2018-11-24 19:04:01.591 Pd[11864:88395] Persistent UI failed to open file file://localhost/Users/EMV/Library/Saved%20Application%20State/org.puredata.pd.pd-gui.savedState/window_2.data: Operation not permitted (1)
Apologise, could not locate pd.log
2018-11-24 18:57:15.379 Pd[11530:84397] Persistent UI failed to open file file://localhost/Users/EMV/Library/Saved%20Application%20State/org.puredata.pd.pd-gui.savedState/window_2.data: Operation not permitted (1) On Sat, Nov 24, 2018 at 6:40 PM IOhannes m zmölnig zmoelnig@iem.at wrote:
On 11/24/18 6:14 PM, Csaba Láng wrote:
Here you are:
something's wrong here. i meant the output of the terminal (not the Pd-console). but it seems that you are not starting Pd correctly (as i think you don't get anything on the terminal). should be something like:
- open the terminal
- run (as a single line): /Applications/Pd-0.49-1.app/Contents/Resources/bin/pd -stderr
-verbose 2>&1 | tee pd.log
the log file will be in pd.log
gfmdasr IOhannes
PS: i'd prefer plain-text files (as in the above example) over rtf-files, as i can read them everywhere.
Pd-list@lists.iem.at mailing list UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list
Pd-list@lists.iem.at mailing list UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list
-- ____________________ m.e.grimm, m.f.a, ed.m. cornell u., tc3 megrimm.net ____________________
Pd-list@lists.iem.at mailing list UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list
Mark,
indeed, I had locked those folders from a previous attempt. With locking them I could prevent from reopening windows again if I killed pd from terminal. now all works except that libdir is not loading.
Popesz
On Sat, Nov 24, 2018 at 7:56 PM me.grimm megrimm@gmail.com wrote:
you try?
rm /Users/EMV/Library/Preferences/org.puredata.pd.pd-gui.plist && rm /Users/EMV/Library/Preferences/org.puredata.pd.plist
and maybe
rm -r /Users/EMV/Library/Saved\ Application
State/org.puredata.pd.pd-gui.savedState/you also might want to try repairing your disk permissions... something on you system is fucked
:)
On Sat, Nov 24, 2018 at 1:31 PM Csaba Láng langcsaba@gmail.com wrote:
no difference between the pd.log and the terminal output, but as you wish:
On Sat, Nov 24, 2018 at 7:10 PM me.grimm megrimm@gmail.com wrote:
just do:
/Applications/Pd-0.49-1.app/Contents/Resources/bin/pd -stderr -verbose 2>&1 | tee ~/Desktop/pd.log
Then the log is on your desktop
On Sat, Nov 24, 2018 at 1:08 PM Csaba Láng langcsaba@gmail.com wrote:
/Applications/Pd-0.49-1.app/Contents/Resources/bin/pd -stderr -verbose 2>&1 | tee pd.log
input channels = 2, output channels = 2
Pd-0.49.1 ("") compiled 09:22:07 Oct 12 2018
port 5400
"/Applications/Pd-0.49-1.app/Contents/Resources/../MacOS/Pd" 5400
Waiting for connection request...
... connected
skipping loading preferences... Pd seems to have crashed on startup.
(re-save preferences to reinstate them)
2018-11-24 19:04:01.591 Pd[11864:88395] Persistent UI failed to open file file://localhost/Users/EMV/Library/Saved%20Application%20State/org.puredata.pd.pd-gui.savedState/window_2.data: Operation not permitted (1)
Apologise, could not locate pd.log
2018-11-24 18:57:15.379 Pd[11530:84397] Persistent UI failed to open file file://localhost/Users/EMV/Library/Saved%20Application%20State/org.puredata.pd.pd-gui.savedState/window_2.data: Operation not permitted (1) On Sat, Nov 24, 2018 at 6:40 PM IOhannes m zmölnig zmoelnig@iem.at wrote:
On 11/24/18 6:14 PM, Csaba Láng wrote:
Here you are:
something's wrong here. i meant the output of the terminal (not the Pd-console). but it seems that you are not starting Pd correctly (as i think you don't get anything on the terminal). should be something like:
- open the terminal
- run (as a single line): /Applications/Pd-0.49-1.app/Contents/Resources/bin/pd -stderr
-verbose 2>&1 | tee pd.log
the log file will be in pd.log
gfmdasr IOhannes
PS: i'd prefer plain-text files (as in the above example) over rtf-files, as i can read them everywhere.
Pd-list@lists.iem.at mailing list UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list
Pd-list@lists.iem.at mailing list UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list
-- ____________________ m.e.grimm, m.f.a, ed.m. cornell u., tc3 megrimm.net ____________________
Pd-list@lists.iem.at mailing list UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list
-- ____________________ m.e.grimm, m.f.a, ed.m. cornell u., tc3 megrimm.net ____________________ _______________________________________________ Pd-list@lists.iem.at mailing list UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list
-
Csaba Láng -
IOhannes m zmölnig -
Lucas Cordiviola -
me.grimm