Hi Ed... i miss you!... hahaha, thanks tomorrow i will check all the solutions
Best regards again friends
José
2010/11/13 Ed Kelly morph_2016@yahoo.co.uk
Or...
[bang( | | /-----[0( [spigot 1] | |\ | | -------------| | |
...or am I missing something? Metastudio 4 for Pure Data - coming soon! Metastudio 3 still available at http://sharktracks.co.uk/puredata
----- Original Message ---- From: Mathieu Bouchard matju@artengine.ca To: Jose Luis Santorcuato santorcuato76@gmail.com Cc: PD List pd-list@iem.at; cyrille henry ch@chnry.net Sent: Sat, 13 November, 2010 17:58:28 Subject: Re: [PD] Multiples toogles and bangs
On Fri, 12 Nov 2010, Jose Luis Santorcuato wrote:
Hi Cyrille and Mathieu, debounce (IMHE) only retards (delay) the
multiples
bangs in particular time(, I need to receive only one and locks, no more
bangs,
then you can reactivate such a delay, so you can return to a zero point
and
repeat a sequence, video or sound and does not occur jumpcut.
The solution I offered is destined to filter a hardware toggle, for example, such that a clean stream of toggle values can be produced from it. If you use it to filter a bang-like hardware button (that still has a 0 or 1 output) you need to retune my formulas with different numbers.
But what I proposed is just one way of doing things. I gave this solution because it can work for both the case of a hardware toggle and a hardware bang.
After that, converting 0,1 into pd bangs is a matter of [change]-[sel 1].
There are other solutions in the case that what you have is really a sequence of bangs at first (and not a sequence of 0,1 values that you happened to convert to bangs).
| Mathieu Bouchard ---- tél: +1.514.383.3801 ---- Villeray, Montréal, QC
Pd-list@iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list