----- Original Message ----
From: Mathieu Bouchard <
matju@artengine.ca>
To: Jose Luis Santorcuato <
santorcuato76@gmail.com>
Cc: PD List <
pd-list@iem.at>; cyrille henry <
ch@chnry.net>
Sent: Sat, 13 November, 2010 17:58:28
Subject: Re: [PD] Multiples toogles and bangs
On Fri, 12 Nov 2010, Jose Luis Santorcuato wrote:
> Hi Cyrille and Mathieu, debounce (IMHE) only retards (delay) the multiples
>bangs in particular time(, I need to receive only one and locks, no more bangs,
>then you can reactivate such a delay, so you can return to a zero point and
>repeat a sequence, video or sound and does not occur jumpcut.
The solution I offered is destined to filter a hardware toggle, for example,
such that a clean stream of toggle values can be produced from it. If you use it
to filter a bang-like hardware button (that still has a 0 or 1 output) you need
to retune my formulas with different numbers.
But what I proposed is just one way of doing things. I gave this solution
because it can work for both the case of a hardware toggle and a hardware bang.
After that, converting 0,1 into pd bangs is a matter of [change]-[sel 1].
There are other solutions in the case that what you have is really a sequence of
bangs at first (and not a sequence of 0,1 values that you happened to convert to
bangs).
_______________________________________________________________________
| Mathieu Bouchard ---- tél: +1.514.383.3801 ---- Villeray, Montréal, QC