Pd-list

pd-list@lists.iem.at

19 participants
33278 discussions

Re: [PD] Creating/editing patches on android?
by Dan Wilcox 07 Apr '23

07 Apr '23

Howdy Matevz, I don't believe so, although I must include the caveat tat I do not use Android, so perhaps there is something out there I am not aware of. Running patches via libpd in a mobile app is much easier than creating a live, graphical *editor* as with desktop Pd as: 1. the interaction metaphors are different 2. libpd does not have a way to tap into the core pd editing logic (yet) That being said (written?), it's certainly possible to create something that can automate writing a Pd file which can then be loaded by libpd, however, once things complicated enough, you basically end up duplicating most of the core logic with the detriment that you have to carefully try to keep it up to date with whatever version of pd / libpd you are using. In short: it's a lot of thankless work that is best *not* done without lots of interest, resources, and support. The closest thing I can think of is rooting the device to install a Linux distro so you can run *desktop* Pd, however I don't think this is where your question is focused. As the author of PdParty, which utilizes libpd on iOS, I made a clear decision early on to *not* tackle on-device editing, mainly for the reasons mentioned above. > On Feb 23, 2023, at 12:00 PM, pd-list-request(a)lists.iem.at wrote: > > Message: 2 > Date: Thu, 23 Feb 2023 10:44:58 +0100 > From: Matevz Leskovsek <matevz.leskovsek(a)gmail.com <mailto:matevz.leskovsek@gmail.com>> > To: pd-list(a)lists.iem.at <mailto:pd-list@lists.iem.at> > Subject: [PD] Creating/editing patches on android? > Message-ID: > <CAEsQPf7MQ+SLkCzqo848OQ9LweoCUzjVPVHXvQYSfvKZ+Gt5qg(a)mail.gmail.com <mailto:CAEsQPf7MQ+SLkCzqo848OQ9LweoCUzjVPVHXvQYSfvKZ+Gt5qg@mail.gmail.com>> > Content-Type: text/plain; charset="UTF-8" > > Hi all, as I remember all those PD on Android platforms (mobmuplat, > pddroid) only allowed running patches and not editing those, meaning > that one needed a desktop computer to create and edit patches. Is this > still the case or is it possible now to use Android device for > creating and running pd patches. Thanks! -------- Dan Wilcox @danomatika <http://twitter.com/danomatika> danomatika.com <http://danomatika.com/> robotcowboy.com <http://robotcowboy.com/>

4 7

Re: [PD] Pd-list Digest, Vol 217, Issue 5
by M P 05 Apr '23

05 Apr '23

Sent from my iPad > On Apr 5, 2023, at 8:06 AM, pd-list-request(a)lists.iem.at wrote: > > Send Pd-list mailing list submissions to > pd-list(a)lists.iem.at > > To subscribe or unsubscribe via the World Wide Web, visit > https://lists.puredata.info/listinfo/pd-list > or, via email, send a message with subject or body 'help' to > pd-list-request(a)lists.iem.at > > You can reach the person managing the list at > pd-list-owner(a)lists.iem.at > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of Pd-list digest..." > > > Today's Topics: > > 1. Re: [tof/pmenu] is the any way for setting the font size? (Ingo) > 2. Re: [tof/pmenu] is the any way for setting the font size? (Ingo) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Wed, 5 Apr 2023 13:52:55 +0200 > From: "Ingo" <ingo(a)miamiwave.com> > To: "'Fred Jan Kraan'" <fjkraan(a)electrickery.nl>, > <pd-list(a)lists.iem.at> > Subject: Re: [PD] [tof/pmenu] is the any way for setting the font > size? > Message-ID: <000201d967b5$28cdae90$7a690bb0$(a)miamiwave.com> > > Hi Fred! > >> No there is currently no such option. Would it be helpful if the menu > would zoom with the rest of the patch? > > I'm not sure what you mean by "zoom with the rest of the patch". > > I have dozens of menus within a single editor patch. > Each of them has a different size / number of entries. > If the menu would "zoom with the rest of the patch" wouldn't they be > different? > > Or did I miss a new zoom feature of Pd? > I'm still using Pd 0.49 for compatibility reasons with older hardware units > that have to run my software. > > I had used xrandr for actually zooming certain patches but there is a > compatibility problem between Intel / AMD processors. > So I would like to enlarge smaller patches by making them bigger to fit Full > HD instead of zooming. > This makes the menus smaller in relation to the entire patch since I cannot > enlarge them as well by the same factor. > > Thanks! > Ingo > > > > > -----Original Message----- > From: Pd-list [mailto:pd-list-bounces@lists.iem.at] On Behalf Of Fred Jan > Kraan > Sent: Wednesday, April 05, 2023 9:06 AM > To: pd-list(a)lists.iem.at > Subject: Re: [PD] [tof/pmenu] is the any way for setting the font size? > > Hi Ingo, >> Is the any way for setting the font size on [tof/pmenu] ? >> >> I'm having problems with the readability (or hitting the menu entries) >> on small touch screens. > No there is currently no such option. Would it be helpful if the menu would > zoom with the rest of the patch? >> >> Thanks! >> Ingo > > Greetings, > > Fred Jan > >> >> >> >> >> _______________________________________________ >> Pd-list(a)lists.iem.at mailing list >> UNSUBSCRIBE and account-management -> >> https://lists.puredata.info/listinfo/pd-list > > > > _______________________________________________ > Pd-list(a)lists.iem.at mailing list > UNSUBSCRIBE and account-management -> > https://lists.puredata.info/listinfo/pd-list > > > > > > > > ------------------------------ > > Message: 2 > Date: Wed, 5 Apr 2023 14:04:56 +0200 > From: "Ingo" <ingo(a)miamiwave.com> > To: "'Fred Jan Kraan'" <fjkraan(a)electrickery.nl>, > <pd-list(a)lists.iem.at> > Subject: Re: [PD] [tof/pmenu] is the any way for setting the font > size? > Message-ID: <000301d967b6$d6f26960$84d73c20$(a)miamiwave.com> > Content-Type: text/plain; charset="us-ascii" > > Forgot to illustrate my problem. > Here's an example of two dropdown menus at 1280x720 and 1920x1080: > > > > > > > > At a resolution of 1280x720 the menus are still readable on a 10" touch > screen and you can hit the numbers with your fingers. > > At a resolution of 1920x1080 this becomes impossible. > > > > > > Ingo > > > > > > > > -----Original Message----- > From: Ingo [mailto:ingo@miamiwave.com] > Sent: Wednesday, April 05, 2023 1:53 PM > To: 'Fred Jan Kraan'; 'pd-list(a)lists.iem.at' > Subject: RE: [PD] [tof/pmenu] is the any way for setting the font size? > > > > Hi Fred! > > > >> No there is currently no such option. Would it be helpful if the menu > would zoom with the rest of the patch? > > > > I'm not sure what you mean by "zoom with the rest of the patch". > > > > I have dozens of menus within a single editor patch. > > Each of them has a different size / number of entries. > > If the menu would "zoom with the rest of the patch" wouldn't they be > different? > > > > Or did I miss a new zoom feature of Pd? > > I'm still using Pd 0.49 for compatibility reasons with older hardware units > that have to run my software. > > > > I had used xrandr for actually zooming certain patches but there is a > compatibility problem between Intel / AMD processors. > > So I would like to enlarge smaller patches by making them bigger to fit Full > HD instead of zooming. > > This makes the menus smaller in relation to the entire patch since I cannot > enlarge them as well by the same factor. > > > > Thanks! > > Ingo > > > > > > > > > > -----Original Message----- > > From: Pd-list [ <mailto:pd-list-bounces@lists.iem.at> > mailto:pd-list-bounces@lists.iem.at] On Behalf Of Fred Jan Kraan > > Sent: Wednesday, April 05, 2023 9:06 AM > > To: <mailto:pd-list@lists.iem.at> pd-list(a)lists.iem.at > > Subject: Re: [PD] [tof/pmenu] is the any way for setting the font size? > > > > Hi Ingo, > >> Is the any way for setting the font size on [tof/pmenu] ? > >> > >> I'm having problems with the readability (or hitting the menu entries) > >> on small touch screens. > > No there is currently no such option. Would it be helpful if the menu would > zoom with the rest of the patch? > >> > >> Thanks! > >> Ingo > > > > Greetings, > > > > Fred Jan > > > >> > >> > >> > >> > >> _______________________________________________ > >> <mailto:Pd-list@lists.iem.at> Pd-list(a)lists.iem.at mailing list > >> UNSUBSCRIBE and account-management -> > >> <https://lists.puredata.info/listinfo/pd-list> > https://lists.puredata.info/listinfo/pd-list > > > > > > > > _______________________________________________ > > <mailto:Pd-list@lists.iem.at> Pd-list(a)lists.iem.at mailing list > > UNSUBSCRIBE and account-management -> > <https://lists.puredata.info/listinfo/pd-list> > https://lists.puredata.info/listinfo/pd-list > >

1 0

[PD-announce] WebPd 1.0.0 alpha released !
by s p 05 Apr '23

05 Apr '23

Announcing the first alpha release of WebPd 1.0.0 ! WebPd is a highly modular compiler for Pure Data, allowing to run .pd patches on web pages. It converts the audio graph and processing objects from a patch into plain human-readable JavaScript or WebAssembly which can then be integrated directly into any web application. So far : - 120 objects implememted (https://github.com/sebpiq/WebPd/blob/main/ROADMAP.md) - An online patch player and compiler (https://sebpiq.github.io/WebPd_website) - Several compilation outputs : JavaScript, WebAssembly, WAV, etc. Test the new WebPd with the online compiler (https://sebpiq.github.io/WebPd_website) or using the CLI (https://github.com/sebpiq/WebPd/#using-the-cli). Many patches won't work yet, as many features are still missing and many bugs are still waiting to be found. I'm counting on your input and your bug reports to move this release closer to a 1.0.0 ! The project is also welcoming motivated contributors (doc is still mostly missing, but I can help you getting started). More info about WebPd here (https://github.com/sebpiq/WebPd). Many thanks to Guillaume Pellerin & Guillaume Piccarreta from IRCAM WAM team, and to Thor Magnusson & Francisco Bernardo from University of Sussex for their invaluable support in pushing this through. Many thanks also to the sponsors : IRCAM & the DAFNE+ project (https://dafneplus.eu/), University of Sussex, and all the generous donours at open collective (opencollective.com/webpd) 💜. Please use and share 💖 ! -- Sébastien Piquemal ----- @sebpiq ----- https://github.com/sebpiq ----- https://second-hander.com _______________________________________________ Pd-announce mailing list Pd-announce(a)lists.iem.at https://lists.puredata.info/listinfo/pd-announce

1 0

WebPd 1.0.0 alpha released !
by s p 05 Apr '23

05 Apr '23

1 0

[PD-announce] WebPd 1.0.0 alpha released !
by s p 05 Apr '23

05 Apr '23

1 0

phase locked loop
by Simon Iten 28 Mar '23

28 Mar '23

hi list, does somebody have a patched version of a PLL (phase locked loop) in PD? or building blocks of it... cheers

4 16

redraw array while recording into it
by Simon Iten 28 Mar '23

28 Mar '23

hi list, i was wondering if i can somehow force a redraw of an array while it is recorded into via [tabwrite~] ? as it is now, the array only displays the new data once tabwrite~ has finished writing. i would like to use the array as a UI element in an art installation and ideally it should look like in a DAW that records, so the waveforms should appear every 300ms or so while recording. sound output will be muted during the 5 second recording, in case the redraw could interfer with sound output. sound input should be consistent though since i record into the buffer :-) cheers

6 8

JACK2 + PD 0.53-2 issue on Windows 11 (can't find ASIO:JackRouter)
by padovani 28 Mar '23

28 Mar '23

Hi, I primarily use Manjaro and macOS, but since my students typically have Windows machines, I'd like to introduce them to PD + Jack. Therefore, I attempted to install Jack and PD 0.53-2 on a Windows 11 machine with an updated OS. While I can select ASIO:JackRouter from Reaper, I'm unable to locate the ASIO:JackRouter device in Pd. Is there a known solution for this issue? Does anyone have a setup recipe that I could try? I've noticed in older posts that people were able to locate the device in PD, and I'm unsure if I'm making a mistake or if it's a version-specific problem with either Windows, JACK2, or PD. Any hints are appreciated! thanks! padovani

1 1

[Deken] Wildcard does not work for 'kiosk*'?
by Roman Haefeli 28 Mar '23

28 Mar '23

Hi all When search 'kiosk-plugin' in 'Find externals', the plugin is listed. When searching 'kiosk*', no results are found. Using wildcards in the suggested example 'freeverb*' correctly returns 'freeverb~'. Why does the wilcard character work for freeverb~ but not for kiosk- plugin? Roman

2 2

pd patch fullscreen on rpi4
by Simon Iten 28 Mar '23

28 Mar '23

what is the current best practice to display a pd patch fullscreen on a raspberry pi? i have pd 0.53.1 installed. there was the kiosk plugin back in the days, but i could not find it on deken...

2 1

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

Pd-list