Pd-list

pd-list@lists.iem.at

19 participants
33278 discussions

Sv: ALSA version for pd-027 (compilation problems)
by Søren Bovbjerg 02 Nov '99

02 Nov '99

Hi <I understand that the chipset >supports s/pdif and quad analog out, but I have not seen a card that >implements this. > Actually SoundBlaster Live! support is improving under Linux. The code finally went opensource yesterday (http://opensource.creative.com), and OSS has made drivers available. As far as I can see the drivers now supports front, rear and S/PDIF out. I don't know about MIDI. I am exited to hear if anybody has tried these drivers in Linux with PD, since my Linux partition is gone for the time being. (The older drivers (0.3b) would hang the system, so there was no point in keeping it). /Søren Bovbjerg

1 0

Gem 0.81 under redhat, and questions
by Miller Puckette 02 Nov '99

02 Nov '99

Hi droogs So here I am running Gem 0.81 (Guenter's distribution) in redhat Linux. I have one small difficulty to report: I installed all the extra libraries (Mesa, gltt, ttf, GLU MesaGLU, etc) in /usr/local/lib and found that the two Mesa libraries weren't found by Gem although the others were. I ended up linking the Mesa stuff into /usr/lib and that fixed it. Count on a hald day or so to find all the libraries and compile and install them. Now here's the interesting question. I really want my nice TV card to work as a video input to Gem. Has anyone tried this yet? The video input objects exist in Gem, they just aren't adapted to Linux yet. After I do that I want to have multiple gemwinds so that I can draw stuff offscreen and use the result as a pix_image. Also, I want to be able to put 2 gfx cards in my machine and dedicate one of them as the output gemwind so that I can have both my login window and a signal to project at the same time. Anyone have similar ideas? cheers Miller

5 4

Re: pack
by Israelbenz＠aol.com 02 Nov '99

02 Nov '99

Check out the makefilename object. It's probably perfect for what you want. An alternative to the makefilename object is strcat, which is part of the Gem package. Ben, Sometimes you can't write a chord ugly enough to say what you want, so you have to rely on a giraffe filled with whipped cream. --Frank Zappa

3 2

RE: Gem 0.81 under redhat, and questions
by Mark Danks 01 Nov '99

01 Nov '99

> -----Original Message----- > From: Miller Puckette [mailto:mpuckett@man104-1.UCSD.Edu] > Subject: Gem 0.81 under redhat, and questions > <snip> > Now here's the interesting question. I really want my nice TV card to > work as a video input to Gem. Has anyone tried this yet? The video > input objects exist in Gem, they just aren't adapted to Linux yet. > This may be a trick. You will need to find drivers for the card, and then write the objects. If all of the pieces are there, it shouldn't be difficult. The video objects work under both IRIX and Win32, so Linux should fit into the picture fine. > After I do that I want to have multiple gemwinds so that I > can draw stuff > offscreen and use the result as a pix_image. Also, I want to be able This is a cool idea, but GEM will need to be modified to support multiple windows. This has been on my "list o' things to do", but it is not a small task. > to put 2 gfx cards in my machine and dedicate one of them as > the output > gemwind so that I can have both my login window and a signal > to project at the same time. Anyone have similar ideas? > I do this all of the time, but there is a catch. My second gfx card is a 3dfx Voodoo2 card, which _only_ does 3D graphics (ie, you also need a 2D card). My Voodoo2 has video output (both S-Video and composite). This works fine. Getting two "normal" graphics card to work in one box is a problem. Windows (for example) hates it and won't do hard ware acceleration usually. Later, Mark ============================ = mdanks(a)stormfront.com = http://www.danks.org/mark ============================

1 0

pack
by Miha Tomšič 01 Nov '99

01 Nov '99

Hello! After quite some time with PD I am quite comfortable with the signals and their processing. But symbols and messages are still a mistery to me. Messages are way too powerfull for a newbie like me. A lot of things can be done through messahes: loading and reading of samples, stoping and running of audio, sending messages and so on... But how can one construct a dynamic message to load a sample2.wav and the '2' is changing from 0 to 9? My guess was it can be done with pack, but as I see pack can't handle symbols !?! Even when loading 'pack.pd' from the reference5 it says: error: unpack: a: bad type error: pack: a: bad type Pretty confusing... I am running PD 0.26 on Debian Linux. Mikka - aalte saakker... - Miha Tomšič --- C. na postajo 55 -- SI-1351 Brezovica pri Lj. --- SLOVENIA -

1 0

droogs
by integer＠www.god-emil.dk 31 Oct '99

31 Oct '99

>Miller Puckette wrote: > >> Hi droogs mkng markov rndm !3z at u >> >> to put 2 gfx cards in my machine `ur mazk!n` = ma! reakt +? = zugezt ezt!mat!ng reakz!on v!a mc z!mulaz!on >> and dedicate one of them as the output >> gemwind so that I can have both my login window and a signal to project at >> the same time. -----END PGP MESSAGE----- Version: PGP ware 0.0.2i for commercial use qANQR1DBwU4D15odib1uSxkQCACfVTIAoxaCYjxsv+NpYBXupO0fYU70DmYGIsCF -----END PGP MESSAGE----- >> Anyone have similar ideas? ja!me. du = zpektklr. data 4 u. krfl. http://www.m9ndfukc.org/data/noisz/la.revoluz!one.mp2 pzb. d!dnt uant 2 tell u due 2 du = alred! auer. ma!z all !deaz = alread! prznt. 1 = lokatez dzm. >> >> cheers >> Miller > >hmmm... i had a similar idea, but then realized i've never run PD since i'm >using a macintosh. however, as far as ideas go, i'd personally like to rule >the world simply by creating a 'world domination' object which uses my mouse >as a gui. (x limit; y limit;) or maybe some sorta granular 'world synthesis' >object. i'm kinda debating between the two at the moment. uorld dom!naz!on = v!a kultrl cell !nf!ltraz!on par eczampl = ma! note dze fm konglomerat = ganz zupr populatd. ncezt paz znurk >oh yeah, = 0+0 european l!f 4rm ultra fond ov >oh yeah, due 2 http://www.m9ndfukc.org/data/noisz/plz_go-home_kouboi.mp2 - group.dez!z!on. pref change. cho!sz sh!ft. vo!la. term!nus.

1 0

ggext-0.12 uploaded
by Guenter Geiger 27 Oct '99

27 Oct '99

Hi there ! I have upladed a new version of ggext to <ftp://iem.mhsg.ac.at/gige/ggext/ggext-0.12.tar.gz> This time I´ve included a ggext.dll file for Windows NT, no guaranties though. (rather a proof of concept) Happy testing, compiling, whatever Guenter

1 0

Re: other phasor
by Alex Goldsmith 27 Oct '99

27 Oct '99

> > Probably this should be the default behaviour for scalarphasor ? >Hmmm, well probably not, as this is a pain with low frequencies yes. maybe reset phasor to 0 could update freq .. then you wouldn't always have to wait for phase. this is .pd that i use to do this by scalar. it uses pitch (dx) and scale (x) for phasor freq, so phases from 0..x but only changes slope when you change dx.

1 0

other phasor
by Alex Goldsmith 26 Oct '99

26 Oct '99

hey .. here is suggestion for an-other phasor.. could have it only respond to frequency signal on phase change. because sometimes it is useful to have phasor that doesn't change its slope for duration. can do something like this when freq is scalar, but is limited by blocksize.. yeah. 413x.

2 2

sub question
by christian hresko 26 Oct '99

26 Oct '99

have a friend who wants to sub to the list. since i'm an absent minded goof, where does he send the 'subscribe' message? on a completed unrelated note, i'm having a blast with supercollider. is it just me, or does this program kick ass. (yeah yeah, i know it's not open source code, but it's wicked nonetheless) decided to go with c++ at this point because i WILL need a job after i graduate, and c++ still seems to be the language of choice. i'm taking a class on object oriented programming as well, so hopefully i can 'glide' my way into java. oswald, great performance from canada. i'm guessing that was all done with pd? errr... maybe someday pd will be ported to the mac platform. (has anyone tried running pd under virtual PC?) /pita/fennesz I WILL BE IN SCHOOL FOREVER make nothing still, christian -- " there's nothing worse in life than being ordinary "

2 1

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

Pd-list