Pd-list April 2015

pd-list@lists.iem.at

71 participants
88 discussions

problems with pd-0.46-6 and jack
by mylists＠t-online.de 02 May '15

02 May '15

Hi everyone! I'm experiencing problems with pd-0.46-6 and jack: I built and installed pd with: sudo apt-get build-dep puredata make -f makefile.gnu JACK=true sudo make install -f makefile.gnu Trying to start pd (the jack server is running fine) with pd -jack pd segfaults immediately. Did I miss something? I'm on Ubuntu 14.04 64bit, using jack2 1.9.10 Thanks for any hints! /phil ---------------------------------------------------------------- Profitieren Sie von der sicheren E-Mail-Übertragung Ihrer Daten mit einer kostenlosen E-Mail-Adresse der Telekom. www.t-online.de/email-kostenlos

4 7

Re: [PD] Tcl error with [cursor], [mousestate], > [receivecanvas]
by rolfm＠dds.nl 01 May '15

01 May '15

is there a way to get (actual) info on donecanvasdialog besides diving into the source? -- so for what it's worth: with a reduced and pure Vanilla patch Vanilla 46.5 doesn't produce Tcl errors any more while playing with the slider however Pdext 43.4 does; unless i put a high speedlimit (300 ms) on the slider messages. my wild guess about donecanvasdialog doesn't apply here. i have attached a zip with a demonstration of the problem. i don't know how to implement a "cursor" object Vanilla 46.5. so that Tcl error is still under investigation. rolf

1 1

Tcl errors while changing a struct, was Tcl error with [cursor], [mousestate], > [receivecanvas]
by rolfm＠dds.nl 30 Apr '15

30 Apr '15

i changed the subject because this error has nothing to do with a "cursor" object. description: a struct displaying an array (size 1000 x 512) updating/changing the struct/array goes awry when the changes come to fast. as prevention a minimal delay time between changes is used. i've made an (new) automated patch to test the minimal dealy time needed (in my case). (zip attached) with Pdext 42.5 it can be as low as 5 msec without getting stuck. idem with Vanilla 46.4. with Pdext 43.4 even with 100 msec Tcl errors occur and after 2 errors or more the patch gets unusable. to me this looks like a bug. (i'm on Windows 7) rolf

1 0

[PD-spam] (must se AE!) donau festival in Krems
by jamal crawford 30 Apr '15

30 Apr '15

My very kind appologies, but for pd ultra nerds in Austria, there is Donau Festival in Krems. Autechre/Ryoji Ikeda/Clark wil be playing livesets on saturday. Wanna hook up? just look for a guy with a glowing ant in parantheses on his chest and talks in pd'ish. best regards ~/.jc

1 0

Re: [PD] Tcl error with [cursor], [mousestate], [receivecanvas]
by rolfm＠dds.nl 29 Apr '15

29 Apr '15

cont.. Vanilla 46.4 also gives Tcl errors. i'm working on a less complicated patch to locate the culprit. in the mean time a wild guess: has the donecanvasdialog been changed? rolf

3 2

priority 6 scheduling failed; running at normal priority
by Jonghyun Kim 28 Apr '15

28 Apr '15

hi list, I would to know what means this message on start up. "priority 6 scheduling failed; running at normal priority" I've never seen this message before. Is it like an error? How to fix it? I'm on Ubuntu 15.04. I just installed it. Pd 0.46.2 from ubuntu's repo. Not from source. Using ALSA. Not Jack. LG, akntk

2 2

update Pd on Odroid-U3 running on Debian Jessy
by Alexandros Drymonitis 28 Apr '15

28 Apr '15

I've installed Pd with apt-get on an Odroid-U3 running on Debian Jessy, but I want to update it, as the Debian repositories now have Pd-0.46-2 and I have Pd-0.46-0. I did "apt-get update" and then "apt-get install puredata" but got these errors: dpkg: error processing package jackd2 (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of gconf2: gconf2 depends on python:any. dpkg: error processing package gconf2 (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of gstreamer0.10-gconf:armhf: gstreamer0.10-gconf:armhf depends on gconf2 (>= 2.28.1-2); however: Package gconf2 is not configured yet. dpkg: error processing package gstreamer0.10-gconf:armhf (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of gstreamer0.10-plugins-good:armhf: gstreamer0.10-plugins-good:armhf depends on gstreamer0.10-gconf; however: Package gstreamer0.10-gconf:armhf is not configured yet. dpkg: error processing package gstreamer0.10-plugins-good:armhf (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of jackd: jackd depends on jackd2 | jackd1; however: Package jackd2 is not configured yet. Package jackd1 is not installed. dpkg: error processing package jackd (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of python-numpy: python-numpy depends on python2.7:any. dpkg: error processing package python-numpy (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of python-gtk2: python-gtk2 depends on python-numpy (>= 1:1.8.0); however: Package python-numpy is not configured yet. python-gtk2 depends on python-numpy-abi9; however: Package python-numpy-abi9 is not installed. Package python-numpy which provides python-numpy-abi9 is not configured yet. dpkg: error processing package python-gtk2 (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of jack-mixer: jack-mixer depends on jackd; however: Package jackd is not configured yet. jack-mixer depends on python-gtk2; however: Package python-gtk2 is not configured yet. jack-mixer depends on gconf2 (>= 2.28.1-2); however: Package gconf2 is not configured yet. dpkg: error processing package jack-mixer (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of jack-stdio: jack-stdio depends on jackd; however: Package jackd is not configured yet. dpkg: error processing package jack-stdio (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of jack-tools: jack-tools depends on jackd; however: Package jackd is not configured yet. dpkg: error processing package jack-tools (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of libgksu2-0: libgksu2-0 depends on gconf2 (>= 2.28.1-2); however: Package gconf2 is not configured yet. dpkg: error processing package libgksu2-0 (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of libgnome2-common: libgnome2-common depends on gconf2 (>= 2.28.1-2); however: Package gconf2 is not configured yet. dpkg: error processing package libgnome2-common (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of libgnomevfs2-common: libgnomevfs2-common depends on gconf2 (>= 2.28.1-2); however: Package gconf2 is not configured yet. dpkg: error processing package libgnomevfs2-common (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of libgnomevfs2-extra:armhf: libgnomevfs2-extra:armhf depends on libgnomevfs2-common (= 1:2.24.4-6); however: Package libgnomevfs2-common is not configured yet. dpkg: error processing package libgnomevfs2-extra:armhf (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of qjackctl: qjackctl depends on jackd; however: Package jackd is not configured yet. dpkg: error processing package qjackctl (--configure): dependency problems - leaving unconfigured Errors were encountered while processing: jackd2 gconf2 gstreamer0.10-gconf:armhf gstreamer0.10-plugins-good:armhf jackd python-numpy python-gtk2 jack-mixer jack-stdio jack-tools libgksu2-0 libgnome2-common libgnomevfs2-common libgnomevfs2-extra:armhf qjackctl E: Sub-process /usr/bin/dpkg returned an error code (1) I can understand there's a configuration problem with each one of these packages, but I've no idea what I should do. Any help?

3 6

[pix_crop] for texture from [gemframebuffer]
by hi 28 Apr '15

28 Apr '15

Dear list, is there any way to use (an object like) [pix_crop] for textures out of [gemframebuffer]? I want to render a [pix_video] stream into a texture of a framebuffer and crop it afterwards dynamically according to my different mappings. I use windows7 + pd-extended, gem 93.3 at the moment thanks Johnny

4 5

audio bit resolution in Pd
by Alexandre Torres Porres 28 Apr '15

28 Apr '15

Hi, I know pd operates in 32bit precision, but that is for all numbers out there, which can be data control or audio streams. Now, output audio values is actually just from -1 to 1, so we can't say that the audio output in Pd is 32 bits. So I wonder what is the actual audio bit resolution that we have in Pd. Cheers

12 25

pd loosing keyboard input?
by Peter P. 27 Apr '15

27 Apr '15

Dear list, I am experiencing a weird issue about a current (git) Pd with an external monitor attached to my laptop and Gem displaying a fullscreen window on that external monitor: While editing a Pd patch on the laptop's monitor I frequently loose keyboard input, meaning that I am no longer able to type into object/message boxes, nor enter/leave edit mode. This happens without the mouse cursor leaving the patch window, and it is quite annoying of course. I am not at all sure if this is a Pd issue, but has anyone encountered a similar thing, or has anyone a clue what could be going on here? I am on Debian testing under fluxbox. Cheerio, P

1 0

← Newer
1
2
3
4
5
6
7
8
9
Older →

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

Pd-list April 2015