Pd-list March 2005

pd-list@lists.iem.at

166 participants
274 discussions

how to do a http request from pd to a webserver and get the results
by Marc Boon 08 Mar '05

08 Mar '05

For the first part (sending the request) I could simply use [netsend], but how do I get the response from the server back into pd? [netreceive] is not appropiate here. I thought of using the [system] object calling wget, but than again, how do I get wget's output back into pd? Ideas welcome! m@rc

7 7

and supercollider
by vincent rioux 08 Mar '05

08 Mar '05

i can vaguely remember that i saw a pd object related to sc but cannot find anything about it anymore any idea? otherwise does anybody know any references which demonstrate their combined use (thanks to osc i suppose). best, vincent

3 2

joystick and osx
by vincent rioux 08 Mar '05

08 Mar '05

Dear list, is there any object similar to Joseph Sarlo's joystick for Linux available on osx? i am willing to use a usb joystick. vincent

2 1

Re: [PD] and supercollider
by Ian Smith-Heisters 08 Mar '05

08 Mar '05

oops, didn't send to the list. -------- Original Message -------- Subject: Re: [PD] and supercollider Date: Mon, 07 Mar 2005 18:18:24 -0800 From: Ian Smith-Heisters <heisters(a)0x09.com> To: vincent rioux <vincent.rioux(a)no-log.org> References: <422CD1D0.3040108(a)no-log.org> CVS->externals->sc4pd I've never tried it. -Ian vincent rioux wrote: > i can vaguely remember that i saw a pd object related to sc > but cannot find anything about it anymore > any idea? > > otherwise does anybody know any references which demonstrate their > combined use (thanks to osc i suppose). > > best, > vincent > > > _______________________________________________ > PD-list(a)iem.at mailing list > UNSUBSCRIBE and account-management -> > http://iem.at/cgi-bin/mailman/listinfo/pd-list -- http://www.0x09.com -- http://www.0x09.com

1 0

RE: [PD] colored/swooping cables
by robertgarvin＠bellsouth.net 07 Mar '05

07 Mar '05

Well.. I looked online at the program and saw how the lines were set up. I can sort of see how this would make reading the patch a bit eaiser, but you have to think, if you're making a patch that's got a command going to several different objects and you're pressed for space, then you're going to have a lot of cables very close to one another. if you have segmented lines stretching across the patch, and bending like they are in those schematics, it'd get very confusing to read. that might be where the color can come in... what did you mean by "easier to make"? does this express pcb just make circuit diagrams, or does it also show you what your schematic will do (ie if you have blinking LED's, can you run it and it show you blinking LEDs)? -Robert -----Original Message----- From: federico [mailto:xaero@inwind.it] Sent: Monday, March 07, 2005 3:20 PM To: robertgarvin(a)bellsouth.net; jsynthlib-list Subject: Re: [PD] colored/swooping cables robertgarvin(a)bellsouth.net wrote: >I was looking around online and saw this website: >http://lab.andre-michelle.com/ >if you scroll down to the "velocity" category, and click on cables, it bring up a very interesting idea. Is there an extern that makes one of the following: >1. colored cables (in the main window, not some gui thing. but in the place where most patches are normally made). >OR >2. Swooping cables (i think this would be rather bothersome though, having cables swoop all over the place, etc.) >thanks, >Robert > > i would prefer "intelligent cables". this is a feature that PCB software has (tools for designing circuits). given a netlist (here, a collection of inlets) with nodes that should be connected together, the program find the best path for each connection, i.e. by following a grid. (there are well known algorithms about this) this "best" path should be a segmented (or bezier, or exp, or ...) line that try to not accross wires nor objects, to make reading (and MAKING) a patch easier, especially in the cases of many->one inlet or vice-versa (or other situations i don't remember ;)). what do you think about it? -- Federico

2 1

Re: [linux-audio-user] Repairing wav files written by pd 64bit
by thewade 07 Mar '05

07 Mar '05

> On Mon, 7 Mar 2005 11:27:32 -0700 > \"thewade\" <pdman(a)aproximation.org> wrote: >> hello, >> >> I have been asking that the developers of PD help me by repairing the >> wave file read and write objects in the 64-bit environment as the >> headers of the PD written files are all messed up, and PD cant read >> in wav files without the user having to overide the headers. I am >> patient an hopefully something will happen there soon. > > > How about replacing the current WAV read/write objects with a wrapper > around the libsndfile routines. This will allow you to read and write > much more than just WAV files, the code works with either endian-ness > and works on 64 bit systems. > > libsndfile is already used for file I/O in SuperCollider and I believe > John ffitch (spelling?) is also working on using in Csound. > > Erik Is this the way writeanysf~ works? What package is that object in? I learned how to repair the wav file headers from the linux-audio-users list: remove all the data leading up to the \'data\' text in the wav file, then run: sox -t raw -r 48000 -swc2 broken-wave.raw corrected.wav That worked, but in order to fix my source can you tell me how to see data in the wav files raw so I can do a diff and see what is different? I used vi to delete the header info for the repair, but all data that wasnt ascii just showed up as ^@. Thanks for the help! -thewade

1 0

Error at 'pd' startup : bad option "map": must be compare, first, index, last, length, match,
by Jacques Lav!gnotte 07 Mar '05

07 Mar '05

Hello, Sorry is this is a FAQ, Google returned noting about his. I just finish compiling puredata with the sources from CVS on an Ubuntu linux box. gcc (GCC) 3.3.4 (Debian 1:3.3.4-9ubuntu5) pd -version Pd version 0.39 TEST 0 compiled 23:14:14 Mar 5 2005 I ran "automake", "configure" then "make all" No error are reported and the binaries are generated. At startup $ /home/jacques/pd-stuff/sources/pd/bin/pd I get : bad option "map": must be compare, first, index, last, length, match, range, tolower, toupper, trim, trimleft, trimright, wordend, or wordstart When browsing 'config.log' one can find : configure:2149: gcc -c -g -O2 conftest.c >&5 conftest.c:2: error: parse error before "me" configure:2155: $? = 1 configure: failed program was: | #ifndef __cplusplus | choke me | #endif then configure:2603: gcc -E conftest.c conftest.c:9:28: ac_nonexistent.h: No such file or directory configure:2609: $? = 1 configure: failed program was: | /* confdefs.h. */ | | #define PACKAGE_NAME "" | #define PACKAGE_TARNAME "" | #define PACKAGE_VERSION "" | #define PACKAGE_STRING "" | #define PACKAGE_BUGREPORT "" | /* end confdefs.h. */ | #include <ac_nonexistent.h> Can anyone help me to find what's going wrong ? Thanks, Jacques

4 6

PD and waveform~
by Robert Gruendler 07 Mar '05

07 Mar '05

hello list, i hope this issue hasn't been discussed here, haven't found anything about this in the list. If yes, i apologize for a double post. As i used to work with max until now, i'm wondering if there's any gui-external similar to waveform~ in Max. I have search for it but couldn't find anything. My main problem is, i'd like to edit loop-length, start- and end point with the mouse at once. If there's no external with those capabilities, maybe there's a workaround how i can achieve the same effect in pd. Thanks for your help Robert -- DSL Komplett von GMX +++ Supergünstig und stressfrei einsteigen! AKTION "Kein Einrichtungspreis" nutzen: http://www.gmx.net/de/go/dsl

3 4

VERY strange OSX PDP install problem
by derek holzer 07 Mar '05

07 Mar '05

Dear PD-listers, This might not be the first time I've said it, but I SWEAR I'm not crazy!!! ;-) Here's the deal: I've been sucessfully installing PDP for OSX 10.3+ users now for over a half a year using these instructions: http://umatic.nl/INSTALL.txt Essentially, install the Mac developers tools, then X11User package, TclTkAqua-8.4.4 and PureData-0.37.1_MacOSX-(0.2.5)-TclTk8.4, followed by unpacking the pdp_pidip_osx.tar.gz in the / directory. On every machine I've installed on in Europe, this is sufficient. However, on every machine I've tried it on the last couple months in the US, it doesn't work! Here's the error, consistant every time: dyld: /usr/local/bin/pd can't open library: /sw/lib/libdl.0.dylib (No such file or directory, errno = 2) pd_gui: pd process exited Trace/BPT trap Is there something different about American Macs that I need to know!?! All US machines in question were OSX 10.3.7 or 10.3.8, to the best of my knowledge. Is it possible that something got dropped by Apple in the latest 10.3 versions? And, of course, how to fix? I assume that installing "dlcompat" with Fink would fix it, but that is really another big step in an already-complicated install process that leaves most Mac folks bewildered! CC'd above are a couple "test cases" that haven't worked out yet. Please include them in all replies. Thx! best, derek -- derek holzer ::: http://www.umatic.nl ---Oblique Strategy # 36: "Consult other sources -promising -unpromising"

4 3

Re:Girbaud fashion show video (using PD/Gem)
by derek holzer 07 Mar '05

07 Mar '05

Hi Cyrill, congrats! The day I dream of comes closer every day, when media artists get sponsered by international fashion designers, and we all look absolutely fantastic hiding behind our laptops! d. cyrille wrote: > hello, > I already send this mail few days ago, but never receive it... > > > La kitchen have been working on a fashion show in september. > I made all video projection on the ground with pd/GEM. > > if you are interested you can find a video of the interesting part of > the show : > http://www.la-kitchen.fr/download/mfg -- derek holzer ::: http://www.umatic.nl ---Oblique Strategy # 36: "Consult other sources -promising -unpromising"

1 0

← Newer
1
...
20
21
22
23
24
25
26
27
28
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

Pd-list March 2005