Pd-list October 2005

pd-list@lists.iem.at

144 participants
227 discussions

determine local IP address
by Urs Liska 04 Oct '05

04 Oct '05

Hello list, is there any method of getting the IP address of the computer the patch is running on? I would like to simplify the process of connecting two patches by sending the second patch the IP address of the first patch. Thanks Urs -- Urs Liska GlÃŒmerstr. 5 D-79102 Freiburg www.graft-music.com www.suonomobile.de [Pd 0.39.0, WinXP]

6 6

triggering vline~ compared with line~
by Enrique Erne 04 Oct '05

04 Oct '05

dear list triggering [0, 1 2 0( -> [vline~] by [bang( or [bng] and writing its outlet to an array with [tabwrite~] gives me a line starting at the beginning of the array. doing the same with a [metro] instead [bng] or [bang( gives me start position 'jumping' around . it seems that the [vline~] starts too late (after the [tabwrite~] has started) . [metro] | \ | [0, 1 2 0( | | | [vline~] | / [tabwrite~] I can't understand this behaviour and why a [line~] does start at the beginning (t3_line~ also). thanks for education :-) Enrique example compares [line~] and [vline~]

5 12

Identifying the position of notes in an (audio) array
by Urs Liska 04 Oct '05

04 Oct '05

Hello list, I'm feeling a little bit odd with my question because it may look kind of like I'm tool lazy to try for myself. But I will have a free (= patching) day tomorrow at my studio where I don't have internet and email access; so I would like to have some ideas that presumably will work before I go there. I have to find the exact positions of audio events in an array. Or more concrete: I will record sounds - a number of single, discrete sounds produced on (or in) a piano - into an array. I need a way to analyze this array to store the positions of the individual attacks to play them back in arbitrary order afterwards. BTW: what is the best solution to measure the time between two bangs in samples (i.e. the number of samples recorded into an array (when the recording is started and stopped manually))? I would be thankful for any helping ideas. Best Urs -- Urs Liska GlÃŒmerstr. 5 D-79102 Freiburg www.graft-music.com www.suonomobile.de [Pd 0.39.0, WinXP]

6 12

pidip and quicktime
by Ed Kelly 04 Oct '05

04 Oct '05

Hi all, I got pidip to compile OK, but when I try to load it it comes up with the error: udefined symbol: quicktime_close pidip: can't load library ?? I have libquicktime0.9.7 and ffmpeg from the cvs archive 20041201 12:00GMT Ed -> -> --> ---> -----> --------> -------------> r3search + praktik EK5perimenz ___________________________________________________________ To help you stay safe and secure online, we've developed the all new Yahoo! Security Centre. http://uk.security.yahoo.com

3 4

[ANN] dssi~ alpha
by Jamie Bullock 04 Oct '05

04 Oct '05

Hi, This is probably a bit premature, but since it is probably usable I should announce that an early version of my DSSI host is now available for keen alpha testers! The Linux binary and source can be found at: http://www.puredata.org/Members/jb/ under dssi~. On my machine, it supports Hexter, fluidsynth-dssi, xsynth, sineshaper, less_trivial_synth, and trivial_sampler. It is currently Linux only, but an OS X version is very high on my priority list. This very much work in progress, and things like the creation arguments will probably change. Also, only a single instance of each plugin is possible at the moment. Bug reports and suggestions are welcome, but please check that they are not listed near the top of dssi~.c before emailing me. Enjoy! -- Regards, Jamie

1 0

atom to unix fifo
by roc 04 Oct '05

04 Oct '05

yo how can i redirect the output of an atom to a unix fifo? tried [shell] but it went mad. saying "old process still running" sending a [mkfifo mypipe( to [shell] doesnt seem to work any ideas? gràcies r

4 5

Re: [PD] compressor~
by IOhannes m zmoelnig 04 Oct '05

04 Oct '05

don't forget the pd-list, since maybe someone else has the same problems... > gcc -c -o rms_tilde.o -I. -g -O2 -DPD rms_tilde.c > rms_tilde.c: In function `rms_new': > rms_tilde.c:109: error: `for' loop initial declaration used outside C99 > mode oh the joys of ansi-C. in line 109 change the "for(int i=0;" to "for(i=0;" and add a line "int i;" at the beginning of the function, where the other variables are declared (dunno which line, i don't have the code with me) > rms_tilde.c:131:2: warning: no newline at end of file > make: *** [rms~] Error 1 oh the joys of osX (i guess it is really just some fancy editor, which all people who code on osX are using) add a newline at the end of file mfg.ad.r IOhannes

1 0

OSC to SuperCollider
by Paul Crabbe 04 Oct '05

04 Oct '05

Début du message réexpédié : > De : Paul Crabbe <paul.crabbe(a)free.fr> > Date : 3 octobre 2005 21:39:20 HAEC > À : Lorenz Schori <lorenz.schori(a)gmx.ch> > Objet : Rép : [PD] OSC to SuperCollider > > > > Le 3 oct. 05 à 13:01, Lorenz Schori a écrit : > > >> make sure you are not trying to use the same port in different >> apps. if sc listens on 9999 you will not be able to listen to this >> port in pd (or any other app). further i recommend to use ipv4 >> addresses (e.g. 127.0.0.1) instead of hostnames (localhost) >> because osx tend to assign ipv6 sockets for machine internal >> communication. pd/libosc is not able to communicate via ipv6 afaik. >> >> - lorenz >> >> Am 03.10.2005 um 10:22 schrieb Paul Crabbe: >> > > it works . localhost was the problem, + I made a stupid typing > error about the port sc listened to. > thanks all. > > Paul

1 0

Gridflow install problems
by Brad Kligerman 04 Oct '05

04 Oct '05

Hey all :: I'm having problems compiling Gridflow on a fresh installation of FC4. I downloaded Gridflow from the CVS, _configure_ and then _make_ hangs... ... base/grid.h.fcs: In function 'Ruby PTR2FIX(const void*)': base/grid.h.fcs:144: warning: format '%08x' expects type 'unsigned int', but argument 3 has type 'long int' base/grid.h.fcs: At global scope: base/grid.h.fcs:498: error: explicit qualification in declaration of `void* operator new(size_t)' base/grid.h.fcs:499: error: explicit qualification in declaration of `void* operator new [](size_t)' base/grid.h.fcs:500: error: explicit qualification in declaration of `void operator delete(void*)' base/grid.h.fcs:501: error: explicit qualification in declaration of `void operator delete [](void*)' make: *** [base/grid.o] Error 1 Ruby 1.8.3 is installed. Any ideas?? Thanks, Brad.

2 3

balancing loudness
by hard off 04 Oct '05

04 Oct '05

any help on this will be appreciated: i have 2 samples, both normalised...but one is very LOUD and the other is very quiet. what process do i run them through to make them both sound equally loud? a compressor? a limiter? what pd objects am i looking for to do this? thanks list ! matt

6 10

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

Pd-list October 2005