Pd-list June 2003

pd-list@lists.iem.at

122 participants
165 discussions

re(3): pd & director
by Fares Kayali 24 Jun '03

24 Jun '03

> I would try to see if the external for PD called Flashserver works on OSX. i am not > sure about this, but si far is the best way to get bidireccional communication > between PD and director (at least under windows) The latest version has a binary for OS X included. It seems to work but I only did some short tests, no 'real life' conditions. http://www.akustische-kunst.org/puredata/flash/ hi! As soon as I get my new IBook I'm gonna try out the flshserver! Thanks! But isnt it possible to communicate between director and pd over the tcp protocol? I'm not sure what netsend/receive do, but shouldnt that be possible as well? cu Fares

6 5

Re: Pd on OSX...
by Mitchell Turner 24 Jun '03

24 Jun '03

Nick, I have tried several times but have not yet had full success. Audio: I can monitor an audio signal from PD though the Mbox but cannot get an audio signal into PD via the Mbox. I have not nailed down the nature of this problem yet. I think it is a PortAudio problem, but I am unsure. With most versions of PAv18, I can only get audio signals out of PD not in. Even the Built-in audio has this problem when compiled with certain versions of PortAudio. Alex was trying to get his system working as well and maybe he can provide more info. MIDI: I have used the Fastlane 2X2 but have had better results with a 1X1 MIDI interface (Roland UM-1). Hope this helps, Mitch > --__--__-- > > Message: 10 > Date: Tue, 24 Jun 2003 14:22:50 +0100 > From: Nick Fells <nick(a)music.gla.ac.uk> > To: pd-list(a)iem.kug.ac.at > Subject: [PD] Pd on OSX... > > Hi all, > > Sorry to bug the list with a question that came up a few months ago > (April I think). > > Has anyone had success with the following setup yet? > > PD with 2 channels duplex audio + MIDI i/o using OSX, Digidesign MBox, > and MOTU Fastlane... I'm using Adam Lindsay's 'unofficial' OSX > installer... > > I want to buy a number of machines with this setup but don't want to do > it until I know it is ok (and I have to do it in a real hurry... groan) > > Any advice/results appreciated. > > Cheers, > > Nick > -- > Dr Nick Fells, > Music Department, > University of Glasgow, Tel: +44 (0) 141-330 4096 > Glasgow G12 8QQ Fax: +44 (0) 141-330 3518 > UK. http://www.gla.ac.uk/music/staff/nick > http://www.gla.ac.uk/music/studio > > > > --__--__-- > > Mitchell Turner, Ph.D. Assistant Professor of Music LaGrange College 601 Broad Street LaGrange, GA 30240 USA Office: 706-880-8015 FAX: 706-880-8028 mturner(a)lagrange.edu http://mmturner.home.mindspring.com

2 1

String formating -> something like makefilename, /makesymbol/prepend
by bbogart＠ryerson.ca 24 Jun '03

24 Jun '03

Hi all, I need to create a message as follows (a gem pix_image open command) open ../../db/0/10 Where 0 and 10 are numbers generated by math objects, its a hierarhcy of Images I'm mapping to an equation. Its a lot like makefilename, but I need to do two subsitutions. Best solution would be something like printf which replaces a placeholder with incoming data: pack 0 10 | foo "open ../../db/%s/%s" fine if it can only do strings... I looked in the pdb without luck, any suggestions? Thanks Ben

12 11

wacom usb tablet as controller ?
by Andre Schmidt 24 Jun '03

24 Jun '03

hi, as i got a wacom usb tablet lying around, i was wondering if it would be possible to use it as a controller for PD ? so, - what settings (and where) do i have to add to get tablet activated ? (but NOT as mouse for Xserver, you know; i want to use my normal mouse for Xserver and the tablet ONLY for PD) - what external do i need for PD ? i found "many" things in archive but none "ready to use" solutions for PD... even "dirty hacks" would make my happy ;) (like copying tuner.o to tuner1.o to get 2 different tuner cards work with pdp) thnx@advance -andre

7 16

help with mic input in linux?
by David Merrill 24 Jun '03

24 Jun '03

Hi there - I'm struggling to get microphone input into pd from linux. I'm using ALSA, and the planet-ccrma version of Redhat 8.0 on an IBM thinkpad. The main things I don't understand are: - how do the settings in alsamixer affect how audio comes into PD? (the main reason I ask is that when I boost the level of the mic and/or line-in in alsamixer, I *hear* the microphone/line audio coming out of the speakers of my PC, but so far I haven't been able to get PD to grab it) - (relately), can I have the levels of mic/line turned down or even muted in alsamixer, but still get this audio into PD for processing? I don't actually want the audio to go straight through my system to my speakers (thus I want to turn down/off these levels in alsamixer), but I do want the audio to be available to PD for processing. - is there any good way to figure out how "-audioindev" devices are numbered in linux other than trial and error? (in the presence of my above problem, I'm not sure if "-audioindev 1" is any more likely to work than "-audioindev 10" based on the multitude of devices that show up in alsamixer..) much appreciated! -David Merrill

2 2

pd _exit
by Thomas Grill 23 Jun '03

23 Jun '03

Hi Miller, hi all, is there an explicit reason that pd quits with _exit() instead of exit() in sys_bail() ? I'm asking because i'm using the pd.dll from another host program and like to use atexit to quit cleanly. best greetings, Thomas

2 1

Speech synthesis
by Carlos Franco Galván 23 Jun '03

23 Jun '03

1 0

RE: [PD] suggestion about graph on parent to the developers
by Matthew Allen 23 Jun '03

23 Jun '03

Miller has stated that GOP is really in its infancy, so I guess any input towards its development will be appreciated. I have been doing quite a bit of GOP work, and its really trial and error. This post: http://old.iem.at/mailinglists/pd-list//2003-02//002297.html helps a bit, but it still is trial and error making sure your GOP parts line up correctly. m. > -----Original Message----- > From: Mark Khemma [mailto:mkhemma@orion.it.luc.edu] > Sent: Monday, June 23, 2003 11:23 AM > To: pd-list(a)iem.kug.ac.at > Subject: [PD] suggestion about graph on parent to the developers > > Hello, > > I don't know if this is possible (because my pd development skills > are null), but is there a way for you developers to code a specific box > which the sliders/bangs/etc could be set in so that when you look at the > parent abstraction, it will look exactly like how you set it up in the > child rather than appearing all scrunched up? The box could set the > pixel dimensions of the parent object in some way, and things that the > user didn't want to show in the parent could be left outside of the box. > If it could be done then the pd-design/layout would look much cleaner and > much more flexible. I hope this makes sense to more than just me. > -Mark .K > > > _______________________________________________ > PD-list mailing list > PD-list(a)iem.at > http://iem.at/cgi-bin/mailman/listinfo/pd-list > > > _________________________________________________ > Scanned for viruses on 23 Jun 2003 17:29:41 > No viruses found. > Virus scanning by http://erado.com

1 0

were find some patches PD
by jerome abel 23 Jun '03

23 Jun '03

hello, I would like to see some good patches on PD, do You known any websites where i can find them? thanks

5 4

pd and director
by --//-- 23 Jun '03

23 Jun '03

link to the director osc plugin: http://www.mat.ucsb.edu/~g.kling/OSC/oscar.html regards

2 1

← Newer
1
2
3
4
5
6
7
8
...
17
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

Pd-list June 2003