Pd-list March 2003

pd-list@lists.iem.at

143 participants
300 discussions

[OT] ae
by Chris McCormick 27 Mar '03

27 Mar '03

http://www.chris-j.co.uk/autechre.doc http://www.chris-j.co.uk/ae1.jpg http://www.chris-j.co.uk/ae2.jpg http://www.chris-j.co.uk/ae3.jpg Chris. _________________________________ chris(a)mccormick.cx http://www.mccormick.cx http://www.sciencegirlrecords.com

2 1

flext and threading
by august 27 Mar '03

27 Mar '03

anyone know of an external or example where flext is used to make audio in a thread? thanks -august.

3 4

pd, text to speech, and windows
by astroboy2520 27 Mar '03

27 Mar '03

i know that there is an object for text to speech under linux port, but what about windows? i'm not real strong with programming, but is there a way to utilize something like the ms speech sdk? i've just downloaded it and is looking to explore it somewhat. is there a way to have pd "talk" to the speech engine? any suggestions would be greatly appreciated.

2 1

best practice
by Chris McCormick 27 Mar '03

27 Mar '03

Hi, I'd like your opinions on the best way to store a single value in a GOP patch. For example, I have a GOP patch which has a slider in it. I instansiate this patch in a higher level patch and whenever I load the patch the slider is reset. Let's say my slider has a name of (for example) $1-slider. So when i instantsiate it i do it like this [gop-patch myname] and then if i want to set the slider position i can do [s myname-slider]. What I am trying to figure out is how I can make a list of slider-names (such as "myname-slider") and have their values stored and recalled each time i load the patch up. It feels to me like this should be easy, but I can't think of the clean way to do it. Any ideas are appreciated. This is for a series of patches for stored-automation and sequencing I am building. Kind Regards, Chris. _________________________________ chris(a)mccormick.cx http://www.mccormick.cx http://www.sciencegirlrecords.com

3 3

RE: [PD] [OT] ae
by mprims＠skynet.be 27 Mar '03

27 Mar '03

What's that good for? m Original Message: ----------------- From: Chris McCormick chris(a)mccormick.cx Date: Thu, 27 Mar 2003 15:52:33 +0800 To: pd-list(a)iem.kug.ac.at, csoundtekno(a)plot.bek.no Subject: [PD] [OT] ae http://www.chris-j.co.uk/autechre.doc http://www.chris-j.co.uk/ae1.jpg http://www.chris-j.co.uk/ae2.jpg http://www.chris-j.co.uk/ae3.jpg Chris. _________________________________ chris(a)mccormick.cx http://www.mccormick.cx http://www.sciencegirlrecords.com _______________________________________________ PD-list mailing list PD-list(a)iem.kug.ac.at http://iem.kug.ac.at/cgi-bin/mailman/listinfo/pd-list -------------------------------------------------------------------- mail2web - Check your email from the web at http://mail2web.com/ .

3 2

MIDI question
by J. Scott Hildebrand 27 Mar '03

27 Mar '03

this is probably ridiculously simple, but i can't figure it out! how do i read incoming MIDI data from a particular channel and a particular device? also how do i create midi data inside of a patch? i looked at the MIDI page in Pd's "pure documentation," but it didn't give me a clear idea of what to do. at home i have a yamaha USB midi interface with two synths and a POD, while running win XP. at work i'm running on one machine with win 2K with a Delta 1010, and on another machine redhat linux with a midiman of some sort. thanks, scott -------------------------------------------------------------------- "640K ought to be enough for anybody." -- Bill Gates, 1981 --------------------------------------------------------------------

2 1

Re: [PD] Linux question
by Dirk Offringa 27 Mar '03

27 Mar '03

Hello That's very kind of you, thanks! I stumbled upon a magazine that had the 3cd's for the Mandrake distro bundled with it, so I installed that one (for the time being.). I unfortunately didn't manage to get my isdn adapter to be recognized (usb adapter), although it is supposed to be supported (yes, read all the faq's, man's, doc's I could find, and tried different scripts I found on the web dealing with this, but it just doesn't work :-( So I still have to boot back to Windows to get on the Internet , that's a drag........In any case, I am impressed how good Linux has become. As soon as Ardour (apparently the most advanced DAW for Linux) will be operational, I guess I will not need Windows at all anymore. Would you mind, Julian, if I mail you in private for some assistance? I wouldn't want to go OT on this list to much. Thanks all Dirk ----- Original Message ----- From: julian <julian(a)selectparks.net> To: <dirk.offringa(a)free.fr> Sent: Tuesday, March 25, 2003 2:51 AM Subject: Re: [PD] Linux question > i will gladly give you help installing debian on your machine should you choose to do so. it might take a little longer at the outset but it is very low maintenance and never requires a reinstall. regardless of your choice of distribution there are many of us on this list using linux, you will always be near assistance. > > > julian oliver > > > On Sun, 23 Mar 2003 09:50:56 +0100 > "Dirk Offringa" <dirk.offringa(a)free.fr> wrote: > > file://Hi > // > file://Well, I spent the last few days studying pd , and I must say that I like it > file://very much indeed. The creative possibilities are very inspiring. > file://I decided though that I should finally get into Linux as well. (Using msw > file://until now). I must keep msw on my computer, so I'll do a dualboot set-up. > file://Having never used Linux before, are there any preferred distributions for > file://use with audio, or doesn't that matter at all? > // > file://Thanks > file://Dirk > // > // > file://_______________________________________________ > file://PD-list mailing list > file://PD-list@iem.kug.ac.at > file://http://iem.kug.ac.at/cgi-bin/mailman/listinfo/pd-list > // > // >

1 0

GridFlow 0.7.1 errata
by Mathieu Bouchard 27 Mar '03

27 Mar '03

bug #1: jpeg decoding fails solution: in format/jpeg.c find the line that says "rewind_if_needed" and replace the whole line by: if (feof(f)) return Qfalse; bug #2: the jmax plugin doesn't install in the proper place (e.g. instant crash on startup, or cannot load, etc.; look for gridflow.so installed in /opt/lib/jmax instead of /usr/lib/jmax) solution: in bundled/jmax/Makefiles/Makefile.linux replace the /opt by a /usr ________________________________________________________________ Mathieu Bouchard http://artengine.ca/matju

1 0

real-time support information
by Luis Filipe Tavares 26 Mar '03

26 Mar '03

Hello! I'm new in this forum, and not very experienced with pdata. I don't know if this is possible, but I would like to get some information on how the real-time operation is implemented in pdata. I'm involved in a project for the University of Oporto Mostly, and my task is to add real-time support to an event-driven multimedia application that is currently operating in a best-effort phylosophy. I'd like to know something about the following issues: - Data transport mechanism - Synchronization and temporization - Delay handling any information would be appreciated Thank you Luis

2 2

problem with Py
by David Brynjar Franzson 26 Mar '03

26 Mar '03

Hope this is the right list for this, but I am having bed luck with compiling py/pyext on my planet-ccrma-redhat 8.0. after setting all the environment paths and runing the sh script, it drops out with this error message.... g++ -c -O6 -mcpu=pentiumpro -DPD -DFLEXT_THREADS -I/usr/include/python2.2 -I /usr/lib/pd/flext source/modmeth.cpp -o pd-linux/modmeth.o source/modmeth.cpp: In static member function `static PyObject* py::py_priority(PyObject*, PyObject*)': source/modmeth.cpp:175: `ChangePriority' undeclared (first use this function) source/modmeth.cpp:175: (Each undeclared identifier is reported only once for each function it appears in.)make: *** [pd-linux/modmeth.o] Error 1 anyone know what I am missing? David B Franzson

2 1

← Newer
1
2
3
4
5
6
7
8
...
30
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

Pd-list March 2003