Pd-list July 2001

pd-list@lists.iem.at

59 participants
80 discussions

RE: [PD] problems running pd/gem on suseppc
by Mark Danks 16 Jul '01

16 Jul '01

Have you tried running pd with audio and midi turned off? I could think of some nasty interactions if the dsp didn't get started up correctly. Later, Mark ============================ = mdanks(a)stormfront.com = Lead Programmer PS2 = http://www.danks.org/mark ============================ > -----Original Message----- > From: Nikolaus Passath [mailto:hnt@xarch.tu-graz.ac.at] > Sent: Sunday, July 15, 2001 8:30 AM > To: pd-list(a)iem.kug.ac.at > Subject: [PD] problems running pd/gem on suseppc > > > i m running pd/gem on a powerbook g3 with suseppc with ctwm as > windowmanager. > when i start pd, i have this failures: /dev/dsp (writeonly): > Permission > denied > /dev/dsp (readonly): Permission denied > error failed to open Midiportsd; continuing without midi > > i can start pd and open gem files, but when i create a > gemwindow, there is > some memory failure and pd_gui: pd process exited > > does anybody has an idea what the problem is ? > > thanks niki > >

1 0

Re: Self-construction &
by forum::für::umläute 16 Jul '01

16 Jul '01

> I curently don't kown : > * how removing an (obj/msg/etc..) in a patch. > * how unconnecting (obj/msg/etc..) > * how showing or hiding a sub patch > * what it's possible to do and what's is not... there is still no possibility to remove obj/msg/connections (as far as i know) sending the sub-patch a "vis 1" will make it pop-up, "vis 0" will make it disappear again something like: mfg.vef.ure IOhannes #N canvas 266 171 450 300 10; #N canvas 205 134 600 400 my-subpatch 0; #X restore 126 205 pd my-subpatch; #X msg 31 104 \; pd-my-subpatch vis 1; #X msg 191 103 \; pd-my-subpatch vis 0; #X text 41 84 pop-up; #X text 194 85 close;

1 0

Re: [PD] Where can I download Gem for Linux ( not a debian distribution)
by Rory Walsh 16 Jul '01

16 Jul '01

Cheers Guenter, I guess a bag load of ram and a new graphics card is in order! Ah well I will just have to put up with it until I return to the super computers of college studios! Thanks again, Rory. ____________________________________________________________ Do You Yahoo!? Get your free @yahoo.co.uk address at http://mail.yahoo.co.uk or your free @yahoo.ie address at http://mail.yahoo.ie

1 0

saving arrays
by Greg Rippin 16 Jul '01

16 Jul '01

Hello all, When the "save contents" box in the array creation dialog box is checked, how (and where) are the contents of the array saved? As part of the patch that it is in? I noticed that if you save the patch, the contents of the array are saved as well. However, if the patch containing the array is nested inside another patch, if you save the parent patch, the contents of the array (inside the sub-patch) are not saved. Is there a way to save the contents of the patch remotely, other than saving it to a text file? Thanks, Greg NYU -- Greg Rippin, Graduate Assistant Music Technology Program New York University 35 West 4th Street, Suite 777 New York, NY 10012 phone 212-998-5422 fax 212-995-4043 musictechgrad.info(a)nyu.edu www.nyu.edu

1 0

security hole in Pd under Linux; please update to 0.33 PATCH 2
by Miller Puckette 16 Jul '01

16 Jul '01

Hi all, This pertains only to Pd under Linux, not NT: There's probably a way to exploit Pd 0.33 and 0.33patch1's setuid property. I've closed the loophole in Pd 0.33 patch 2, available on the website, http://crca.ucsd.edu/~msp/software.html I urge anyone with Pd installed in Linux to do the upgrade soon... cheers Miller

1 0

GrIPD v0.0.2 is available
by Joseph A. Sarlo 15 Jul '01

15 Jul '01

Only small changes: should now work with Python 2.1 (thanks Uta, you were right), sending two "connect" messages is no longer a problem, and problem with using -nogui in Windows is fixed. http://mambo.peabody.jhu.edu/~jsarlo/gripd/ -- ______________________________ | | Joseph A. Sarlo | | jsarlo(a)mambo.peabody.jhu.edu |______________________________

1 0

local arrays again
by jfm3 15 Jul '01

15 Jul '01

I too am trying to write a generic sampler object, and I too am having the "local arrays" problem. I tried Uta's solution from May: #N canvas 230 467 439 289 10; #X obj 17 40 openpanel; #X obj 17 155 soundfiler; #X floatatom 16 186; #X msg 17 13 bang; #X text 59 12 read file; #X obj 143 5 inlet; #X obj 19 66 t s b; #X obj 18 99 pack s s; #X obj 77 78 symbol \$1-table; #X obj -85 95 s \$1-filename; #X obj 17 209 s \$1-siz; #X obj 198 120 table \$1-tableL; #X obj 198 146 table \$1-tableR; #X msg 17 126 read -resize \$1 \$2L \$2R; #X obj 17 -13 r \$1-open; #X obj 121 41 r \$1-read; #X obj -44 158 outlet; #X connect 0 0 6 0; #X connect 0 0 9 0; #X connect 0 0 16 0; #X connect 1 0 2 0; #X connect 2 0 10 0; #X connect 3 0 0 0; #X connect 5 0 0 0; #X connect 6 0 7 0; #X connect 6 1 8 0; #X connect 7 0 13 0; #X connect 8 0 7 1; #X connect 13 0 1 0; #X connect 14 0 3 0; #X connect 15 0 6 0; But this does not work. When I bang it, I get: error: \$1-tableL: no such table Similarly, when I try to use |table $0-samp| and |read -resize sample.wav $0-samp< into |soundfiler|, I get errors on the name "0-samp". I am using PD 33 on Linux. Am I missing a patch or something? Thanks very much in advance. (jfm3)

3 3

max/msp --> net --> pd
by Johannes M Zmoelnig 13 Jul '01

13 Jul '01

hi all ! hope this fits in: i tried out the "pdnetsend" object (from ftp://fals.ch/pub/pdnets/ ) to control a pd-patch via max/msp. unfortunately only the first atom of a list seems to be send (a short look at the source code confirmed me). has anybody fixed this ? i do not have a C-compiler for macintosh (and if i had, i dunno whether i could use it - not that apple-freak) (the OSCthing of the cxc-external is documented far too badly, so i want give this a try as long as possible) mfg.cgd.jhf IOhannes

1 1

/dev/dsp (readonly): Device or resource busy
by mirko＠petrovich.net 13 Jul '01

13 Jul '01

Hi all ! I am running pd with redhat 7.1,audio card es1371 and OSS drivers but I can't open ADC and DAC or midiin and midiout at the same time. At startup I get the following message: $ pd -verbose Pd version 0.33 PATCH 1 compiled 00:15:30 Jul 12 2001 device 1: tried /dev/midi; returned 3 device 1: tried /dev/midi; returned -1 device 1: tried /dev/midi00; returned -1 device 1: tried /dev/midi0; returned -1 couldn't open MIDI output device 1 opened 1 MIDI input device(s) and 0 MIDI output device(s). opened audio output on /dev/dsp; got 2 channels bytes per sample = 2 setting nfrags = 6, fragsize 1024 audiobuffer set to 40 msec /dev/dsp (readonly): Device or resource busy input channels = 0, output channels = 2 port 5401 Waiting for connection request... TCL_LIBRARY=/usr/local/lib/pd/tcl/library TK_LIBRARY=/usr/local/lib/pd/tk/library /usr/local/lib/pd/bin/pd-gui 5401 ... connected $ pd -nodac -nomidiin -verbose Pd version 0.33 PATCH 1 compiled 00:15:30 Jul 12 2001 device 1: tried /dev/midi; returned 3 opened 0 MIDI input device(s) and 1 MIDI output device(s). opened audio input device /dev/dsp; got 2 channels bytes per sample = 2 setting nfrags = 6, fragsize 1024 audiobuffer set to 40 msec input channels = 2, output channels = 0 OSS: issuing first ADC 'read' ... ...done. port 5400 Waiting for connection request... TCL_LIBRARY=/usr/local/lib/pd/tcl/library TK_LIBRARY=/usr/local/lib/pd/tk/library /usr/local/lib/pd/bin/pd-gui 5400 ... connected I am new to Linux and I don't know how to solve this. Thank you MIRKO PETROVICH cl -- Get your firstname@lastname email for FREE at http://Nameplanet.com/?su

1 0

Re: [PD] GrIPD: A new front-end GUI builder for PD
by Yuuta Nakayama 13 Jul '01

13 Jul '01

Finally i installed python 1.52 and it works verrry fine! > Hmmm, I suppose the first thing to do is figure out whether it's the PD > object that's not accepting or the python GUI that's not connecting. What > I would do is create a gripd object in pd with port 23 and telnet to it. > Just put "gripd 23" in pd then send it a "connect" message, then open up > your telnet client and connect to 127.0.0.1. If it connects, GrIPD will > say so in the console. Then send a "disconnect" message to the PD object. > Your telnet client should display "!disconnect:0|" and then disconnect if > all is good. i tested this and got connection to PD, so gripd object seems to work. > To test the python part, I would go get a dummy server. You can get > Tambu Dummy Server at: > http://www.xploiter.com/tambu/tambudummy.shtml > Set the port to 3490 and the protocal to TCP and have it start listening. > Then open grip.py and connect (from the file menu). If you add a button > control you should see something like "!setRcvr:rbutton0|" in the dummy > server if all is good there. I wrote simple dummy server using python and tested, but still the GUI part failes to connect, so the ploblem is in this part. I think it must be compativility ploblem between python 1.52 and 2.1. Anyway, it is amazing that we can build my own gui like(rather, more effectively!) reaktor. thanks a lot! Uta.

2 1

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

Pd-list July 2001