update :
ESI UGM6 seems to works fine with 2 inputs and 2 outputs but without ethernet see [1] to remove it
cheers
a
[1] : http://wiki.linuxaudio.org/wiki/raspberrypi
-- do it yourself http://antoine.villeret.free.fr
2013/5/2 Julian Brooks jbeezez@gmail.com
Hey Antoine,
Thanks for the info. When I have more time I'll have another go with the HD.
On 2 May 2013 16:33, Antoine Villeret antoine.villeret@gmail.com wrote:
it makes the Pi to reboot when you plug it in, maybe it's due to my power supply but after rebooting it works straight off
lsusb -d 2573: -vvv Bus 001 Device 004: ID 2573:0009 Couldn't open device, some information will be missing Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x2573 idProduct 0x0009 bcdDevice 1.00 iManufacturer 1 iProduct 2 iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 116 bNumInterfaces 2 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 250mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 0 bInterfaceClass 1 Audio bInterfaceSubClass 1 Control Device bInterfaceProtocol 0 iInterface 0 AudioControl Interface Descriptor: bLength 9 bDescriptorType 36 bDescriptorSubtype 1 (HEADER) bcdADC 1.00 wTotalLength 46 bInCollection 1 baInterfaceNr( 0) 1 AudioControl Interface Descriptor: bLength 12 bDescriptorType 36 bDescriptorSubtype 2 (INPUT_TERMINAL) bTerminalID 1 wTerminalType 0x0101 USB Streaming bAssocTerminal 0 bNrChannels 8 wChannelConfig 0x00ff Left Front (L) Right Front (R) Center Front (C) Low Freqency Enhancement (LFE) Left Surround (LS) Right Surround (RS) Left of Center (LC) Right of Center (RC) iChannelNames 0 iTerminal 0 AudioControl Interface Descriptor: bLength 16 bDescriptorType 36 bDescriptorSubtype 6 (FEATURE_UNIT) bUnitID 2 bSourceID 1 bControlSize 1 bmaControls( 0) 0x00 bmaControls( 1) 0x03 Mute Control Volume Control bmaControls( 2) 0x03 Mute Control Volume Control bmaControls( 3) 0x03 Mute Control Volume Control bmaControls( 4) 0x03 Mute Control Volume Control bmaControls( 5) 0x03 Mute Control Volume Control bmaControls( 6) 0x03 Mute Control Volume Control bmaControls( 7) 0x03 Mute Control Volume Control bmaControls( 8) 0x03 Mute Control Volume Control iFeature 0 AudioControl Interface Descriptor: bLength 9 bDescriptorType 36 bDescriptorSubtype 3 (OUTPUT_TERMINAL) bTerminalID 3 wTerminalType 0x0301 Speaker bAssocTerminal 0 bSourceID 2 iTerminal 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 0 bInterfaceClass 1 Audio bInterfaceSubClass 2 Streaming bInterfaceProtocol 0 iInterface 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 1 bNumEndpoints 1 bInterfaceClass 1 Audio bInterfaceSubClass 2 Streaming bInterfaceProtocol 0 iInterface 0 AudioStreaming Interface Descriptor: bLength 7 bDescriptorType 36 bDescriptorSubtype 1 (AS_GENERAL) bTerminalLink 1 bDelay 1 frames wFormatTag 1 PCM AudioStreaming Interface Descriptor: bLength 11 bDescriptorType 36 bDescriptorSubtype 2 (FORMAT_TYPE) bFormatType 1 (FORMAT_TYPE_I) bNrChannels 8 bSubframeSize 2 bBitResolution 16 bSamFreqType 1 Discrete tSamFreq[ 0] 44100 Endpoint Descriptor: bLength 9 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 9 Transfer Type Isochronous Synch Type Adaptive Usage Type Data wMaxPacketSize 0x0360 1x 864 bytes bInterval 1 bRefresh 0 bSynchAddress 0 AudioControl Endpoint Descriptor: bLength 7 bDescriptorType 37 bDescriptorSubtype 1 (EP_GENERAL) bmAttributes 0x01 Sampling Frequency bLockDelayUnits 0 Undefined wLockDelay 0 Undefined
but PD see it clearly
a
-- do it yourself http://antoine.villeret.free.fr
2013/5/2 Julian Brooks jbeezez@gmail.com
Cool - did the gigaport work straight off/recognised at boot/lsusb etc?
On 2 May 2013 16:20, Antoine Villeret antoine.villeret@gmail.comwrote:
Hi,
I got an ESI Gigaport HD+ to work on the RPi 8 outputs at 48kHz / 24bit, no input with alsa backend without dwc_otg.speed=1 option
I also tested ESI UGM6 (2 high-Z inputs, 2 line output) It works well with alsa when input is disabled I got lots of crackle with input enabled I can't get it to work at all with dwc_otg.speed=1
I've updated the Wiki page
cheers
a
-- do it yourself http://antoine.villeret.free.fr
2013/4/28 Antoine Villeret antoine.villeret@gmail.com
hi,
thanks for feedback I bought yesterday a Gigaport HD+ I hope it will work at least on my Ubuntu laptop and I'll test it on RPi too and update the wiki page
I also bought at the same time a ESI UGM96 (2 Hi-Z input, 1 stereo output and 2 headphone out - but i don't how many separates outputs) to use on the Pi, I'm not sure it will work because the user manual doesn't say anything about USB and USB Audio class compliance while the HD+ manual does...
And yes, the UDJ6 works great on the pi, 6 outputs (a stereo headphone jack output and 4 RCA)
cheers
antoine
-- do it yourself http://antoine.villeret.free.fr
2013/4/28 Julian Brooks jbeezez@gmail.com
Sorry,
Just noticed the question about the hub: No hub - not sure why you're asking but if it's relevant the Pi was connected to 5.2v/2a power cable, and running most recent firmware.
On 28 April 2013 01:16, Julian Brooks jbeezez@gmail.com wrote:
> Hi Antoine, > > The one I added is the HD (not HD+). This one has the same casing > as the 'AG' so was hopeful but no, nada. > > Initially thought the one I tested was broken as there was no sign > of it on the pi. Plugged it into my debian lappy and boom - > all recognized and working. Pah. > > Currently sat on the 'not sure what to do with pile'. It would have > been great; 6 outs for not much money (plus the > recycling redundant technology thing). > > You seem to have had good results from the 'UDJ' card which seems to > be currently the other choice for multiple audio outs on the RPi? > > Julian > > > On 27 April 2013 16:25, Miller Puckette msp@ucsd.edu wrote: > >> I can't report about that but I have another compliant USB 1.1 >> interface, >> Edrol UA25, which I've never been able to get to work with a pi. >> So I think >> this is confirmation that that can indeed sometimes happen (if it >> were just >> one of us perhaps it could have been a fluke). >> >> cheers >> M >> >> On Sat, Apr 27, 2013 at 11:18:06AM +0200, Antoine Villeret wrote: >> > hi all, >> > >> > someone added the ESI Gigaport HD+ as a "not working sound card" >> few days >> > ago on http://puredata.info/docs/raspberry-pi >> > >> > I'm quite surprised because this sound card is USB Audio Class 1 >> compliant >> > and USB spec version 1.1 compliant and also fully compatible to >> USB 2.0 >> > host controllers >> > >> > Moreover, I had a confirmation this sound card works on Linux and >> it's >> > previous version ESI Gigaport Ag works on the Pi. >> > >> > Thus i was thinking Gigaport HD+ will work on the RPi; >> > Who made the test ? >> > Could you tell me more about the setup ? (mainly if you use a USB >> hub or >> > not) >> > >> > Cheers >> > >> > a >> > >> > >> > -- >> > do it yourself >> > http://antoine.villeret.free.fr >> >> > _______________________________________________ >> > Pd-list@iem.at mailing list >> > UNSUBSCRIBE and account-management -> >> http://lists.puredata.info/listinfo/pd-list >> >> >> _______________________________________________ >> Pd-list@iem.at mailing list >> UNSUBSCRIBE and account-management -> >> http://lists.puredata.info/listinfo/pd-list >> > >