Yep... pd/doc/3.audio/examples/G04.control.blocksize.pd
details in chapter 7 of my book to appear in a week or so..
cheers Miller
On Wed, Nov 19, 2003 at 04:59:16PM +0100, Thurstan wrote:
Hello,
while trying to make a simple Karplus/Strong model I ran into something I cannot figure out. I cannot seem to get the delaytime smaller than 1.55 seconds thus the highest note is about 660 Hz. I can visually get the delaytime smaller in the numberbox but this had no effect on the actual delaytime whatsoever.
Does this have to do with the I/O blocksize and if so which value should I give this? If not is there another solution to get a smaller delay than 1.55 ms?
I used the [vd~] and [delread~] to generate the simple feedback model. I also used a [lop~] but switched this off to measure the highest pitch the delay model could generate. For the loss in a filterless model I used [*~].
Grtz Wilf
PD-list mailing list PD-list@iem.at http://iem.at/cgi-bin/mailman/listinfo/pd-list