5 Jun
2013
5 Jun
'13
9:07 p.m.
Hi,
Ingo wrote:
Yes, that works fine but it mixes up the port number of the arduino and the serial adapter. I can't get the two to be assigned to the same port number each time Pd starts. They both show up as /dev/ttyUSB0 or /dev/ttyUSB1 on the [comport].
There are some udev rules floating on the net for that.
You can also use the files in /dev/serial/by-id/ instead of /dev/ttyUSB* and select by serial number.
hth,
--
Charles