Hello, My problem has been solved by running alsamixer with flags to Delta-1010LT, and raising input levels there. So, if indeed you (tim) have exactly the same problem, then this should solve it.
J
On Sun, Nov 9, 2008 at 10:30 AM, Miller Puckette mpuckett@imusic1.ucsd.eduwrote:
Wierd. I have out-of-the-box Fedora 9 running (it's a terrible Fedora release, by hte way, I'm going to switch to 10 when it comes out later this month) and my delta1010LT runs fine. So if it's an ALSA bug it must have been fixed meanwhile.
BTW, there are 4 jumpers on the 1010LT card; if they are missing the first two inputs might not work (but the other 6 should anyway.)
cheers Miller
On Sun, Nov 09, 2008 at 04:56:48PM +0100, tim wrote:
hello Jamie and list,
exact same problem here. Delta1010LT outputs work, inputs don't. I tried on ubuntu hardy and pure:dyne. I checked all there is to check in envy24 control. btw, There are also other problems showing up with alsa lately. For example, the Echo Layla 3G stopped working altogether. I'll try Bryan's suggestions later...
Tim
On Sun, 2008-11-09 at 12:36 +0100, Bryan Jurish wrote:
morning Jaime,
I have the same card in my desktop here under debian testing/unstable, and have also successfully used all the analog in- and outputs with pd.
The only potential causes for your problem that occur to me are
"stupid"
ones that you've probably already checked, e.g. routing problems on the card [have you run "envy24control" and checked that the input levels (tab page "analog volume") are all up where they should be?] Did you start pd with "-channels 8"?
I also vaguely remember hearing of problems with the alsa mixer API (alsamixer, amixer, etc.) for envy24 cards -- the conventional wisdom seems to be: "avoid ALSA's mixer and use only envy24control for this card". You might also check whether your distro is doing something sneaky like calling "amixer" behind your back when the driver module (snd_ice1712) is loaded (e.g. as a post-install operation declared in /etc/modules.conf)... other than that, I'm pretty much out of ideas...
I haven't found any file /etc/modules.conf, but I did find /etc/asound.conf
#SWCONF #DEV 0 defaults.pcm.card 0 defaults.pcm.device 0 defaults.ctl.card 0
marmosets, Bryan
On 2008-11-09 09:06:25, "Jaime Oliver" jaime.oliver2@gmail.com
appears
to have written:
Hello all,
I have an M-Audio Delta 1010LT in Fedora 8. I never installed any drivers since it seemed to work right out of the box. I have managed
to
use the 8 channels OUT, but can't get a signal into pd in any of the
8
channels IN. Has anyone else seen something like this?
best,
J
-- Jaime E Oliver LR
joliverl@ucsd.edu mailto:joliverl@ucsd.edu www.realidadvisual.org/jaimeoliver http://www.realidadvisual.org/jaimeoliver www-crca.ucsd.edu/ http://www-crca.ucsd.edu/ www.realidadvisual.org http://www.realidadvisual.org
858 202 1522 9168 Regents Rd. Apt. G La Jolla, CA 92037 USA
-- ................................... www.timvets.net info@timvets.net, timvets@gmail.com 0032 474 89 66 86 skype: tim167_ ...................................
Pd-list@iem.at mailing list UNSUBSCRIBE and account-management ->
http://lists.puredata.info/listinfo/pd-list
Pd-list@iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list