OK, I added two externals into svn at http://pure-data.svn.sourceforge.net/viewvc/pure-data/trunk/externals/mrpeac... [b2f] will take four bytes and return a float, while [f2b] takes a float and outputs four bytes. (This is really easy in c...) Of course it only works if the floating-point format is the same at both ends.
Martin
On 2013-03-14 13:41, Petar Jercic wrote:
Martin , thank you for everything, I got it working now even with floating point numbers, here is the rundown of the method
[solved] BUT BEFORE FOLLOWING THIS, NOTE THAT FLOATING POINT NUMBER IS SOMETHING THAT YOU DON'T WANT TO PARSE, IF YOU LIKE YOUR NERVES.
The first problem is
- Error was in using on the server side an ntohl() on a float number,
which corrupts it heavily. Mark my words, ntohl() is an enemy of the float. Just receive it reversed and manually work out the conversion, you HAVE to do it manually anyways :P
- Float is a complex standard, even more complex when Pure Data
converts everything to decimal partially per byte. Separate Mantissa, Exponent and Sign using bitwise operators [<<][>>], and work out the float conversion. Follow this thread for Mantissa, that one is the hardest Convert floating point number from binary to a decimal number http://stackoverflow.com/questions/15393113/convert-floating-point-number-from-binary-to-a-decimal-number/
Good luck ^^
//Petar
On 13/3/13 1:51 PM, Martin Peach wrote:
I attached a patch that should reconstruct a long if it's bigendian, although it doesn't give 1000000 for the sequence you provided...
The floating point numbers are more difficult, you need to separate the sign, exponent and mantissa and then put it all together.
Martin
On 2013-03-13 06:08, Petar Jercic wrote:
Wow, these methods you proposed made me realize that I was using the wrong endian method on my UNIX server, it has to be ntohl(). Now I got it correct, and I am receiving data (bytes) in the correct order.
*>>>: 0 0 0 2 0 10 114 26 0 0 0 51 0 16 242 78
Sample data might be 2 1000000 51 2000.56, which could be read in the data ... somewhat :)*
**Now my question is, how do I get four compact numbers to work with?* Now I have a series of bytes, but at least in the correct order.
I haven't been able to extract the data using [bytes2any] and [route], so I prepared a small patch to demonstrate the problem, maybe you can show me by modifying it?
//Petar
On 11/3/13 2:31 PM, Martin Peach wrote:
On 2013-03-10 17:58, Petar Jercic wrote:
Sorry, I can't use ASCII text as communication method, since I plan to send large quantities of data at high speed rates, I need to optimize it as much as possible. Compared to streaming bytes, ASCII is inefficient up to a several orders of magnitude.
Is there a method for correct endianness in Pure Data, like these C functions:
ntohs()--"Network to Host Short" ntohl()--"Network to Host Long"
You can do that with Pd like this (ntohs):
[unpack 0 0] | | [* 256] | | | [+ ] | [ \
or
[unpack 0 0] | | | [* 256] | | [+ ] | [ \
for littleendian.
Floats are harder but still possible. The main difficulty is in splitting the incoming stream in the right places. (I think ASCII is not orders of magnitude slower, and it is also less ambiguous).
Martin
On 09/3/13 5:15 PM, Martin Peach wrote:
It's probably safer to get the server to send the numbers as ASCII text, to avoid disagreements about endianness and floating-point representation. Then, to extract the numbers, you could use [moocow/bytes2any] or make a custom parser using [pdlua].
Martin
On 2013-03-09 10:55, Petar Jercic wrote: > Apparently [netclient] on the Pure Data side cannot receive nothing > else > than ; delimited messages. > So the solution for the problem: > *My question is, is there a way to send something other than string > message to Pure Data, like byte-stream or serialized number stream? > Can > Pure Data receive such messages?* > > The solution is to use [tcpclient], it can receive byte-stream data. > > Now I have another problem regarding the data read, on how to > convert it > back to usable numbers. > > From my UNIX server I am sending a structure > > typedef struct { > int var_code; > int sample_time; > int hr; > float hs; > } phy_data; > > Sample data might be 2 1000000 51 2000.56 > > When received and printed in Pure Data I get output like this: > > >>>: 2 0 0 0 104 34 9 0 51 0 0 0 235 50 48 69 > > You can notice number 2 and number 51 clearly, I guess the others > are > correct as well. Might be some network inversion of LSB/MSB. > > *How can I get these numbers back to a usable format and get them in > separate variables? > > *//Petar* > * > > > _______________________________________________ > Pd-list@iem.at mailing list > UNSUBSCRIBE and account-management -> > http://lists.puredata.info/listinfo/pd-list >
Pd-list@iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list