Dear Ivica, I did as You suggested. Make install installed a file pd in /usr/local/lib/pd-l2ork There I've executed ./pd but I've got
sh: 1: /usr/local/lib/bin/pd-gui: not found
What has been my mistake? 2012/7/5 Ivica Bukvic ico@vt.edu
You don't need any. Just install the burrito supreme binary version by running sudo make install inside the folder (or sudo make uninstall to remove). You will need to install tkpng lib though by doing sudo apt-get install tkpng.
Cheers! On Jul 5, 2012 12:04 PM, "Stefan Thomas" kontrapunktstefan@gmail.com wrote:
I coulnd't find debian packages on their site!
2012/7/5 Ivica Bukvic ico@vt.edu
FWIW You can try pd-l2ork. Those were built on Ubuntu.
Best wishes,
Ico On Jul 5, 2012 11:44 AM, "Stefan Thomas" kontrapunktstefan@gmail.com wrote:
Dear Kaj, thanks for Your help. I've installed the lowlatency kernel and I've also reinstalled qjackctl and pd, from the ubuntu repositorys. But I still do have the problem, that I don't hear any sound. I opened Your patch signal-example and I can see the "cables". But I can't hear any sound! I don't have the option "compute" audio. When I click DSP, nothing happens. Shall I install a newer or older version from source?
2012/7/4 Kaj Ailomaa kaj.ailomaa@mousike.me
On Wed, 2012-07-04 at 08:20 +0200, Stefan Thomas wrote:
Dear Iain, I did as You suggested, the problem remains the same. One problem might be: When I reinstall PD some of the other PD-related packages will be reinstalled to. But I've read in the meantime, that my problem could be a bug,
related
to my version of PD. It seems to be the same problem like the one, I have read on this site: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=645041
Yep. It seems to be a bug with that release.
I've added an example as an attachment. Should be enough to check if everything works.
Alsa works for me, but it doesn't work well at lower latencies. Jack is preferred for that. Only, to get lower latencies with jack, you'll need to install linux-lowlatency (low latency capable linux kernel) and set up realtime privilege (all this is done if you installed Ubuntu Studio).
To set up realtime privilege, you'll need to do a few things.
First, install linux-lowlatency: sudo apt-get install linux-lowlatency
Second, you need to answer yes when asked about this when installing jack. If unsure, see that the file /etc/security/limits.d/audio.conf is not named /etc/security/limits.d/audio.conf.disabled. To rename it, do this in a terminal: sudo mv /etc/security/limits.d/audio.conf.disabled /etc/security/limits.d/audio.conf Inside that file, you need to have these two lines uncommented (they should be by default):
@audio - rtprio 95 @audio - memlock unlimited
If the file doesn't exist, just create it: sudo nano /etc/security/limits.d/audio.conf ..and add the two lines above.
The third thing to do is to add yourself to audio group: sudo usermod -a -G audio $USER
Then, reboot.
Latency is adjusted separately for both jack and pd. I believe jack handles audio latency when used with pd, while pd handles its' internal data latency. Good latency for me is 64 frames/period in qjackctl settings, and around 5-10 ms in pd jack settings.
|---------------- kaj.ailomaa@mousike.me ---------------------|
Pd-list@iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list
Pd-list@iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list