Hi Matijoncek,
Thanks for your suggestion. Unfortunately it doesn't work. Adding 'localhost to the .py file made no difference. Also, the Pd receive patch has [udpreceive] which only takes the port address as an argument.
Must admit that I'm now distracted by this post '[PD] Pd --> Python, IPC, FUDI, pdreceive, et cetera !' which works here but is quite a lot more involved. More steep learning curves.
All the best,
Julian
On 6 May 2013 09:17, matijoncek prdoncek ilovedrisk@gmail.com wrote:
Try changing the IP in the python script to "localhost"
client.connect(('127.0.0.1', 9001)) to client.connect(('localhost', 9001))
make sure it is also set to "localhost" in the pd patch.
On Sun, May 5, 2013 at 10:38 PM, Julian Brooks jbeezez@gmail.com wrote:
Hey Alex / all,
This could be stupidly obvious but I'm completely new to python so bear with me please:
I'm following the tutorials that Alex put up here: https://github.com/alx-s/RPi_tutorials/tree/master/OSC_python-pd
First off, many thanks for the tutorials Alex:)
I can't seem to get the test python program to connect/receive from Pd.
https://github.com/alx-s/RPi_tutorials/blob/master/OSC_python-pd/OSC_send_py...
When I do this: python OSC_send_python.py with the corresponding pd patch up and running I get: not connected In the console where the py file is running from.
Must be something simple as the py file has very little in it.
On the RPi pd 0.44-2 iemnet/[udpreceive]
Send examples work btw
Does anyone have a quick fix/some wisdom?
Best wishes,
Julian
Pd-list@iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list