Le 15/08/2016 à 14:43, Lucas Cordiviola a écrit :
Totally,
Martin suggested something using what Ray already had (arduino – L298), but these chips seems perfect.
/> and can easily be control thanks to a line out and small electronic circuit (OP AMP) /
You meant: (square wave) --> [dac] --> line out --> op amp --> Step (logic)
(square wave) --> [dac] --> line out --> op amp --> driver board -> Stepper
cheers c
Right?
Mensaje telepatico asistido por maquinas.
*From:* Pd-list pd-list-bounces@lists.iem.at on behalf of cyrille henry ch@chnry.net *Sent:* Monday, August 15, 2016 9:50 AM *To:* pd-list@lists.iem.at *Subject:* Re: [PD] stepper control
hello,
electronic circuit like : http://reprap.org/wiki/Pololu_stepper_driver_board http://reprap.org/wiki/Pololu_stepper_driver_board
Pololu stepper driver board - RepRap - RepRapWiki http://reprap.org/wiki/Pololu_stepper_driver_board reprap.org Please note: Pololu stepper driver boards has 0.05 ohm sense resistors instead of StepStick 0.2 ohm. A Pololu stepper driver board is a well known RepRap machine ...
or http://www.schmalzhaus.com/EasyDriver/ can control the steeper in a more acurate way than what you can do with an audio amplifier. (see datasheet for more info about the way this chip control a motor).
they are inexpensive and can easily be control thanks to a line out and small electronic circuit (OP AMP)
I think you will have better result using this dedicated chip than hacking an audio amplifier.
cheers c
Pd-list@lists.iem.at mailing list UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list