Hi,
Allen, Michael wrote:
I’m using a Teensy to get data from Pots and switches into PD on a RPi. The teensy sketch is set to open serial at 9600 baud. In PD I have [comport devicename 9600]. It won’t receive data. When I change the object to [comport devicename 115200] it immediately opens and starts receiving data. I’m specifying the device name since it seems to be switching between port 1 and 0 for unknown reasons upon power cycling or unplugging, etc.
for the device name you can use the [devicename ( message instead with port name rather than a port number.
Then use it like that:
[loadbang] | [devicename /dev/serial/by-id/the-id-of-you-teensy, baud 9600 ( | [comport]
This may solve the other problem.