On Fri, 13 Jul 2001, uta wrote:
Thank you. I tried just "open Filename", then the GUI showed up, and after few seconds "Connection Timedout" dialog will pop up. It seems the GUI fails to connect to PD, so I changed Options -> configure -> Connection Address from "localhost" to 127.0.0.1 or so, but it still fails to connect.
This happens also under Windows2000.
Python2.1 wxPython 2.3.0 for python 2.1 and i installed python under C:/python21.
Are there a Python's version compatibility ploblem? Any ideas?
Hmmm, I suppose the first thing to do is figure out whether it's the PD object that's not accepting or the python GUI that's not connecting. What I would do is create a gripd object in pd with port 23 and telnet to it. Just put "gripd 23" in pd then send it a "connect" message, then open up your telnet client and connect to 127.0.0.1. If it connects, GrIPD will say so in the console. Then send a "disconnect" message to the PD object. Your telnet client should display "!disconnect:0|" and then disconnect if all is good.
To test the python part, I would go get a dummy server. You can get Tambu Dummy Server at: http://www.xploiter.com/tambu/tambudummy.shtml Set the port to 3490 and the protocal to TCP and have it start listening. Then open grip.py and connect (from the file menu). If you add a button control you should see something like "!setRcvr:rbutton0|" in the dummy server if all is good there.
-- ______________________________ | | Joseph A. Sarlo | | jsarlo@mambo.peabody.jhu.edu |______________________________