Hi,
Thanks for helping with this. I finally got it working, by changing
the Octamic to ADAT2 and then defining all the channels from
-audioindev 11.
Thanks alot for the help.
-Mika
Quoting marius schebella marius.schebella@gmail.com:
hi mika,
have you tried -audioindev 4,7 -inchannels 12? I think you should be able to use different soundcards, but maybe there is no possibility to use 4 from the one and 8 from the other, but rather all channels from both soundcards?? but I don't know about that. maybe -audioindev 4,5,7,8,9,10? on the other hand, if the octamic pre-amp is connected to adat1 can you do -audioindev 1, and -inchannels 36, does that give you all inchannels? marius.
Mika Ristimäki wrote:
Hi again,
I've been searching the list archives even more and I've found
several posts that say that this can be done and that the
instructions can be found from the archives. However I haven't been
able to find any instructions. =) So any ideas how to do it in
Windows XP? Sorry for nagging, but I really like using Pd, but if
there is not support for my hardware I might have to change the
software.-Mika
Hi all,
I have a problem how to use multiple audio devices in Pd. I tired to search the archives but didn't find anything useful. Anyway...
I have RME Fireface 800 audio interface and RME Octamic microphone pre-amplifier. Octamic is connected to Fireface with ADAT. I'm using Windows XP. I have connected 8 mics to Octamic and 4 mics to Fireface (it also has 4 mic level inputs). The problem is that I don't know how to get all 12 channels to work in Pd.
when I start Pd with -listdev, I get
audio input devices: 0. Live! Cam Optia AF (Mic)
- Fireface Analog (1+2) MME
- Fireface Analog (3+4) MME
- Fireface Analog (5+6) MME
- Fireface Analog (7+8) MME
- Fireface Analog (9+10) MME
- Fireface SPDIF MME
- Fireface ADAT1 (1+2) MME
- Fireface ADAT1 (3+4) MME
- Fireface ADAT1 (5+6) MME
- Fireface ADAT1 (7+8) MME
- Fireface ADAT2 (1+2) MME
- Fireface ADAT2 (3+4) MME
- Fireface ADAT2 (5+6) MME
- Fireface ADAT2 (7+8) MME
- Fireface Analog (1+2)
- Fireface Analog (3+4)
- Fireface Analog (5+6)
- Fireface Analog (7+8)
- Fireface Analog (9+10)
I can have the 8 Octamic channels if start Pd with -audioindev 7 -inchannels 8. Or the 4 Fireface channel by -audioindev 4 -inchannels 4. But when I try to define both like this, -audioindev 4,7 -inchannels 4,8 pd gives an error "separate audio device choice not supported; using sequential devices."
-audioindev 4 -inchannels 12, does not work either.
So is it impossible to get the two different devices working simultaneously or is there some kind of hack?
Thanks for any help
-Mika
Pd-list@iem.at mailing list UNSUBSCRIBE and account-management ->
http://lists.puredata.info/listinfo/pd-list