Should I try to upload a older firmata?
:Pierre
2011/7/5 Hans-Christoph Steiner hans@at.or.at
The Uno board was troublesome back when I first tried it, but that was a while ago. I didn't make that StandardFirmata_2_2_for_Uno_0_3 firmware, so I don't know what changes it has. Is anyone having these problems on boards older than an Uno?
.hc
On Jul 5, 2011, at 3:32 PM, Pierre Massat wrote:
It makes no difference at all.
Here's what happens : Inputs 2 through 7 work fine. Inputs 8 and 9 work fine.
But if i use any of the inputs within the 2-7 group, and then use any input of the second group (8 and 9), i have to trigger the later twice before i can see something is happening.
It goes like this : (in group 2 to 7) First guy : "Pushed button 3." Second guy (Pd) : "Ok, pushed button 3." First guy : "Pushed button 7." Second guy : "K, you pushed button 7." First guy : "Pushed button 8." Second guy : "Come again?" First guy : "PUSHED BUTTON 8!" Second guy : "Oh, yeah, button 8..." First guy ; "Pushed button 3." Second guy : "I'm sorry, what button?" First guy : "BUTTON 3!!" Second guy : "Yep, button 3.
I hope it is clear now what the problem is.
Pierre
2011/7/5 Pierre Massat pimassat@gmail.com
Ok, I checked in Windows XP, with a custom sketch, and all of my inputs work flawlessly. (The IDE seem to work much better in Windows than in Linux btw).
So the problem has to be somewhere between firmata and pduino.
I will try with the latest pduino...
Thanks for your help!
Pierre
2011/7/5 Hans-Christoph Steiner hans@at.or.at
It would good to nail down the source of this and fix it. Which version of Firmata are you using? Which firmware? Also, there was a bug like that a while back that was fixed, so make sure you have the latest Pd patch too:
http://at.or.at/hans/pd/objects.html#pduino
.hc
On Jul 5, 2011, at 2:49 PM, Ingo wrote:
I fixed it by replacing the mapping object by a custom patch which deals with the first two switches seperately.**** I’ll look it up tomorrow and send you my fix.****
And where does the problem lie? In the board, firmata, or pduino?****
It suppose fermata since the wrong numbers arrive at pduino.****
Ingo****
*Von:* Pierre Massat [mailto:pimassat@gmail.com pimassat@gmail.com] *Gesendet:* Dienstag, 5. Juli 2011 20:41 *An:* Ingo Scherzinger *Cc:* Ingo Scherzinger *Betreff:* Re: [PD] Arduino (is drivin me mad****
Can we fix that??
Pierre**** 2011/7/5 Ingo Scherzinger ingo@fixitinthemix.de**** I happens when switching from the first two switches to the others within a 8-bit block. Since the block has the wrong header it will ignore the "on" message and send the first "off". So you have to press the button twice. Once pressed it works until you press another button within that block and return to the first one.
Ingo
Von: Pierre Massat [mailto:pimassat@gmail.com] Gesendet: Dienstag, 5. Juli 2011 19:56 An: Ingo Scherzinger Betreff: Re: [PD] Arduino (is drivin me mad****
Glad to know i'm not the only one with this problem! Sorry for starting a new thread. I have problems with inputs 8 and 9, or 9 and 10 (the first two on the second digital input socket).
Pierre 2011/7/5 Ingo Scherzinger ingo@miamiwave.com This is the same problem I had described several times before. There is an error in the 8-bit block where the digital ins 2+3 are coming in. It can be traced somewhere in the mapping section. I'll try to finally look it up tomorrow.
Ingo
Von: pd-list-bounces@iem.at [mailto:pd-list-bounces@iem.at] Im Auftrag von Pierre Massat Gesendet: Dienstag, 5. Juli 2011 19:36 An: pd-list Betreff: [PD] Arduino (is drivin me mad
Hi All,
I apologie if this is off-topic. Please let me know if you think it is.
I have been working on my arduino-based pedal, and im faced with a peculiar problem right now. I'm using 8 digital inputs ( 6 on the first socket of the board, inputs 2 through 8, and 2 on the second digital socket, inputs 9 and 10). The first 6 inputs work perfectly, but when i want to use any of the last two inputs (9 and 10), i have to trigger them twice before they start working. Then i'm faced with the exact same problem when i get back to the first 6 inputs. I am pretty sure that i used the very same wiring for all 8 inputs.
So... I thought that maybe this could be a problem with firmata or pduino (no offense, Hans!). I have been spending the last hour trying to write a simple program in the arduino software in order to print in serial monitor the values of my digital inputs.
Now my question... Is the arduino software just really really bad? Or was it just not designed to work on an ubuntu machine? It is randomly very slow at start-up, it randomly disables the serial port menu in Tools, it randomly decides to prevent me from uploading the program in the board, or warns me that serial port dev/ttyACM0 is already in use, or can't be found. The fact that i unplug and replug the board, or change the usb port, or restart the software doesn't seem to make any difference.
This is beginning to look more like witchcraft than computer science to me.
Please help me, or i'll teach it how to fly out my window.
Thank you.
Pierre
Pd-list@iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list
Man has survived hitherto because he was too ignorant to know how to realize his wishes. Now that he can realize them, he must either change them, or perish. -William Carlos Williams
Computer science is no more related to the computer than astronomy is related to the telescope. -Edsger Dykstra