Roman Haefeli wrote:
thanks for the info.
On Fri, 2009-05-08 at 19:27 +0000, martin.peach@sympatico.ca wrote:
just out of curiosity: if there is a solution, that works well for [tcpserver], couldn't it be applied also to [comport]?
Maybe. But I think you should be able to use [comport] with no hardware handshaking enabled and send data even if no cable is attached. Sometimes the absence of one of the two input handshake signals prevents the serial hardware from sending. Also if an error occurred in the reception of serial data it may not be handled properly in [comport]. So I'm not sure what is causing this particular crash, since HC said that it happened when the remote device was disconnected but gave no further detail.
iirc, on linux at least, [comport] makes pd hang, _whenever_ the other end disappears. i.e.:
- pulling out the usb-cable, while the arduino is connected
- turning off an rfcomm device
This looks like something related to the usb interface. I think pulling out an RS-232 cable has no effect, as the serial driver can only be closed by [comport]. With a usb adapter the usb driver can close the port. I suspect that the comport_tick routine, which is called periodically to check for received characters, tries to access the serial port after the usb driver has closed it. The non-Windows code in comport_tick looks like this:
unsigned char serial_byte; fd_set com_rfds; int count = 0;
FD_ZERO(&com_rfds); FD_SET(fd,&com_rfds);
while((err=select(fd+1,&com_rfds,NULL,NULL,&null_tv)) > 0) { err = read(fd,(char *) &serial_byte,1); outlet_float(x->x_data_outlet, (t_float) serial_byte); ++count; }
As you can see the select call only checks for the presence of received characters with com_rfds, and doesn't check the write or exception status. I suppose the select call should also check the exception fd_set, as the usb driver has no other way of informing [comport] that it has closed the port, it should have flagged it there. (Although if the fd itself is no longer valid I don't know what to do...using non-existent file descriptors is a good way to crash Pd)
ATM I only have 'legacy' RS-232 ports on my hardware so I can't test it, but I can change the code.
Martin