Actually all I need to do is control two white lights which are connected to a DMX dimmer each. I've done a simple setup on lanbox's software, but can't really see how to control it via Pd. It's on channels 1 and 2, so I guess I need to send something like a list with the channel number and the brightness number, right? what's the exact syntax for [udpsend]?
On Sun, Mar 17, 2013 at 11:31 PM, brandt@subnet.at wrote:
i worked with it and as alexandros said it´s really easy. i once made a patch, which was a kind of simulation of an avolite board from the eighties. worked straight out the box
all the best
Zitat von dreamer dreamer@puikheid.nl:
On Sat, Mar 16, 2013 at 9:49 PM, Alexandros Drymonitis <adrcki@gmail.com
wrote:
Hi,
Has anyone used the Lanbox-LCX sending it control data from Pd? On
lanbox's
website I saw that it also receives TCP commands. Would mrpeach library's [tcpsend] do?
Yes I have. You can control the lanbox-lcx with simple TCP/UDP commands. At least we used [udpsend] to transmit the datapackets (looking back at my patches. it's also from mrpeach). But [tcpsend] should work just the same (we had to enable UDP-mode in the firmware afaik).
I have borrowed a prototype lcx+ but I don't have it working at the moment. All I can tell you that it is quite trivial to interface with the lanbox. If you need any more specific information I can get it from one of the devs if you want :)
grtz, drmr