Pd-list April 2005

pd-list@lists.iem.at

141 participants
255 discussions

gridflow for pd OS X
by Patrick Pagano 27 Apr '05

27 Apr '05

hi folks been struggling this evening with getting gridflow to compile on OS X anyone have a success story with this yet? cheers Patrick Pagano, B.S.,M.F.A Research And Development Assistant Digital Worlds Institute University Of Florida (352) 294-2070

4 10

$0- question
by Lazzaro Nicolò Ciccolella 27 Apr '05

27 Apr '05

Dear all, I would want to create a message that transmits a list to an object "canvas", but the object "canvas" to which it must transmit, changes to every time, therefore also the message must change to every time (it take the parts that change of the message from the creation arguments of the abstraction). With "makefilename" and "pack" I am able to create a message like this: |; |$0-cnv_in_01_01 vis_size 98( but if I click on the message only a object like [r 0-cnv_in_01_01] (without the "$") receive the message. Seem that the "$" come deleted from the sender. How I can dynamically create a message for send lists to a canvas that has a "receive-symbol" like "$0-cnv_in_01_01" ? thanks for whichever aid -- Lazzaro

5 8

Re: Nord Modular instrument converter
by Juhana Sadeharju 27 Apr '05

27 Apr '05

Hello. I updated the nord2pd project at ftp://ftp.funet.fi/pub/sci/audio/devel/nordmodular/ The NOTES describes the algorithms of the modules. Not complete, nor correct explanations. Includes references to existing software and papers. I made screenshots of the PD files I have already written to. Screenshots are, e.g., for people who does not use PD. I included the parser codes from NMEdit project. OK. Only 14 of the 109 modules has some PD code. Only 3 modules are complete. 10 modules missing little things. Because I started this project 25 days ago, I expect I have finished this project at November with 109 modules having some code and only 23 modules completely finished. Then next 8 years and I give up. Clavia should not be worried about this project at all, I'm sure. Here are some thoughts the discussion has raised: (1) Volunteers should now read the NOTES file. The information I need is how you would implement the modules in PD or in any other system. Modulars: csound, alsamodular, supercollider, galan, ssm, beast, reaktor etc. Non-modulars: ladspa, vst, music-dsp code archive, etc. (2) The PD files includes now only trivial material. It should be easy to write them with the other systems. Please do it. (3) The free clone of Nord Modular is not important. I'm aiming at a minimal system which makes NM patches to run in other systems. The GUI for building the patches is not part of my project. The UI or GUI for controlling the patch parameters is part of my project. OSC control could be simplest way to add the control to the patches. (4) Only NM patches, not NM G2 patches. Tasks we have: (1) To write the NM file parser which only maps the patch data to a C data structures. E.g., module[4].name module[4].col module[4].row module[4].p[2] module[4].im[1] module[4].ih[1] module[4].ic[1] That could be simpler than expected. NMEdit already has parser code in "nmedit/libs/libnmpatch". I included a copy in my project package, no need to download NMEdit. Somebody expert should understand the code and write a standalone program for us. (2) Finish the PD modules. Or modules in any other system. (3) Update the parser with the patch conversion codes. Juhana -- http://music.columbia.edu/mailman/listinfo/linux-graphics-dev for developers of open source graphics software

1 0

usb_serial port
by wollscheid 27 Apr '05

27 Apr '05

Hi list - not sure whether this has been asked before - I checked the archive but.... I'm using a USB to serial converter but the comport object does not recognise this as RS232. Is there anything I can do within PD to let the object recognise the port? Cheers Achim

2 2

osx Gem Window Weirdness.
by timon botez 27 Apr '05

27 Apr '05

Hi, I got a G5 running pd-Gem with a Nvidea dual head graphics card (fast and optimized with memory). I have two 1024x768 projectors connected and want my image to go across. So I type in the dimensions into the window but it wont let me create. I get the error message: GemwinMac: width - 2048 height - 768 Mac: no info.context error: Gem: Unable to create window error: Gem: No window made The thing that puzzles me is that when I was testing this on a 1600x1200 monitor I was able to create an image as large as 2400x900 to do some high res screen grabs. So Im assuming its not down to the card or Gem. What could it be? Any clues? Thanks, Timon.

1 0

PD firefox pluggin
by beau25＠access4less.net 27 Apr '05

27 Apr '05

Hello List, I am trying to use the PD firefox pluggin, but am having a tough time installing it because the zip downloads keep give me an error message: ! C:\Documents and Settings\bcasey.AACLABS\My Documents\Downloads\iars-pd.zip: The archive is either in unknown format or damaged I have tryed winzip and winrar? Are there anyother versions? has anyone got this working? -B www.cypod.co.nr

3 4

debugging pd
by Patrick Pagano 26 Apr '05

26 Apr '05

Hi i am also having an error when building pd from source gdb gives me Reading symbols for shared libraries .................................................. done Reading symbols for shared libraries . done Reading symbols for shared libraries . done Reading symbols for shared libraries . done Reading symbols for shared libraries . done Reading symbols for shared libraries . done Reading symbols for shared libraries . done Reading symbols for shared libraries . done Reading symbols for shared libraries . done Reading symbols for shared libraries . done Reading symbols for shared libraries . done Reading symbols for shared libraries . done Reading symbols for shared libraries . done Reading symbols for shared libraries . done Reading symbols for shared libraries . done Reading symbols for shared libraries . done Reading symbols for shared libraries . done Reading symbols for shared libraries . done Reading symbols for shared libraries . done Reading symbols for shared libraries . done Reading symbols for shared libraries . done Reading symbols for shared libraries . done Reading symbols for shared libraries . done Reading symbols for shared libraries . done Reading symbols for shared libraries . done Reading symbols for shared libraries . done Reading symbols for shared libraries . done Reading symbols for shared libraries . done Reading symbols for shared libraries . done Reading symbols for shared libraries . done Reading symbols for shared libraries . done Reading symbols for shared libraries . done Reading symbols for shared libraries . done Program received signal EXC_BAD_ACCESS, Could not access memory. 0x8fe18f88 in __dyld_local_relocation () how can i fix this? it seems to be onlyy when i build from source?? Patrick Pagano, B.S.,M.F.A Candidate Research And Development Assistant Digital Worlds Institute University Of Florida (352) 294-2070

4 8

New Pd.app beta
by Hans-Christoph Steiner 26 Apr '05

26 Apr '05

http://at.or.at/hans/pd/installers.html Finally, I put together a newer Pd.app beta. Its based on the Pd.app that Ben Bogart built for PixelTANGO since Miller and I haven't been able to figure out the magic that he worked to get Pd to build properly using Tcl/Tk 8.4.9. Tcl/Tk 8.4.9 brings lots of lovely improvements, including Jamie's CoreGraphics updates. Other notable addition: - GUI objects work again (unauthorized, [envgen], etc.) - [hid] and company are part of the build - [comport] serial port object - pmdp - help files were renamed to conform to the standard (NAME-help.pd) Notable omissions: - flext-based externals (the Pd.app build hasn't been updated for the new flext building) - pdp... its still quite hard to compile, but a solution seems near... As always, there is lots left to do... .hc ________________________________________________________________________ ____ "Information wants to be free." -Stewart Brand

3 3

registration for pure-data.info
by Thoralf Schulze 26 Apr '05

26 Apr '05

Hi list, sorry for sending this to the list, but pdmeister(a)puredata.info isn't answering ... I tried to register for puredata.info and never got a conformation mail, so I'm unable to log into my account. It would be great if someone could look into this - many thanks in advance. with kind regards, thoralf. ___________________________________________________________ Gesendet von Yahoo! Mail - Jetzt mit 250MB Speicher kostenlos - Hier anmelden: http://mail.yahoo.de

1 0

tryin' to load xsample 1.3 on windows PD 38.3
by lalo 26 Apr '05

26 Apr '05

Hi guys! when i try to load the xsample library ...well it loads but i'm no more able to load any .pd file.. simply the PD edit window does'nt show up anymore until i delete the '-lib ..\my path here\xsample' from my batch loading file anyone with the same problem? thanx lalo -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.308 / Virus Database: 266.10.3 - Release Date: 25/04/2005

2 1

← Newer
1
2
3
4
5
6
7
8
9
...
26
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

Pd-list April 2005