Pd-list December 2005

pd-list@lists.iem.at

127 participants
204 discussions

dumpOSCSerial
by James Baker 26 Dec '05

26 Dec '05

hey list! I've been doing a bit of research for my next project, an avr based controller. i was originally intending to go the midi route, but i would prefer to use open sound control. anyhow my question is - after shuffling through some ccrma lab pages i found reference to a modified dumpOSC extern, dumpOSCSerial (can be found at http://ccrma.stanford.edu/workshops/mid2005/communication/osc.html) where osc packets are transmitted via serial port and interpreted in pd. has anyone had any experience / luck / nightmares with this extern ? any other ideas suggestions are more than welcome ! cheers, james

2 1

Re: Connection with sensors - new devices? (Marc Lavall?e)
by Georges Babouche 26 Dec '05

26 Dec '05

I connected up to 16 Joysticks via 2 D-link USB hubs in cascade with and with an USB/ethernet/USB estension to reach 50m cable length. Adding 3m USB extension between Joysticks and hub and 5m USB extension between 1st and 2nd USB hub, and, against my expectations it worked fine! (all tha data is collected with maxMSP's hi, and i didn't check latency and i must admit that this is no hard real time but OK to play some music with 20 people and that's all is was about :-) Type: application/x-gtar Size: 1715 bytes Desc: not available Url : http://lists.puredata.info/pipermail/pd-list/attachments/20051224/2518ff28/… ------------------------------ Message: 2 Date: Sat, 24 Dec 2005 10:03:02 -0500 From: Marc Lavall?e Subject: Re: [PD] Connection with sensors - new devices? To: pd-list(a)iem.at Message-ID: <200512241003.03912.marc(a)hacklava.net> Content-Type: text/plain; charset="iso-8859-1" Le 23 DÃ©cembre 2005 14:12, Hans-Christoph Steiner a Ã©crit : > According to spec, 10BaseT has a maximum cable length of 100m. USB 1.0 > spec says 5m. I've used 100BaseT on cables well over 100m, so that > spec is quite conservative. I've heard about people having quite a few > troubles trying to get USB up to 20m. > > Plus you can get a 300m spool of CAT5 for US$40. Ethernet is really > far better than USB if you want to go for long cable lengths. Here's a few USB extension solutions, but they are expensive: http://www.usbgear.com/USB-Extenders.html http://www.everythingusb.com/hardware/USB_distance_extension/ http://www.cablestogo.com/product.asp?cat_id=201&sku=29341 http://www.icron.com/products/usb/usb_products.php -- Marc ------------------------------ Message: 3 Date: Sat, 24 Dec 2005 16:27:40 +0100 From: Christian Klippel Subject: Re: [PD] Connection with sensors - new devices? To: pd-list(a)iem.at Message-ID: <200512241627.40630.ck(a)mamalala.de> Content-Type: text/plain; charset="iso-8859-1" hi all, Am Freitag 23 Dezember 2005 20:12 schrieb Hans-Christoph Steiner: [...snip...] > > According to spec, 10BaseT has a maximum cable length of 100m. USB 1.0 > spec says 5m. I've used 100BaseT on cables well over 100m, so that > spec is quite conservative. I've heard about people having quite a few > troubles trying to get USB up to 20m. > yes, its true that usb cant extend that long with just a cable, also, the maximum length is _very_ dependant on the connected device. here i have a 5 meter cable, no problems. also, usb hubs are really cheap.... but for sure, adding hubs adds latency as well ..... > Plus you can get a 300m spool of CAT5 for US$40. Ethernet is really > far better than USB if you want to go for long cable lengths. > thats right. im just curious about the latency i can get, but we will see.... --------------------------------- Do you Yahoo!? New and Improved Yahoo! Mail - 1GB free storage!

2 1

Re: [PD] Pd-0.38.4-extended-RC6 release
by Patrice Colet 26 Dec '05

26 Dec '05

Date: Sun, 25 Dec 2005 08:21:18 -0000 X-Mailer: YahELite Content-Type: text/plain; charset=ISO-8859-1 In reply to: >From: Hans-Christoph Steiner <hans(a)eds.org> >Subject: Re: [PD] Pd-0.38.4-extended-RC6 release >Date: Sun, 25 Dec 2005 00:01:24 -0800 > > >I've installed Pd-0.38.4-extended-RC6.exe on two computers, and on both >of them, the file was here: c:\Program Files\pd\pd-settings.reg > >Its not there on your computer? > >.hc > hello, I've downloaded the pd-settings.reg here: http://cvs.sourceforge.net/viewcvs.py/pure-data/packages/win32_inno/ and used it. With this file, libraries into pd/extra are loaded with this reg key so we don't have to add the lines -lib in .bat file for loading "static" libraries as far as I understood. Is there a way to load -path with that .reg file? here is a part of the pd start up message on windows with using the pd-settings.reg: iemabs: can't load library iemmatrix: can't load library ix: can't load library memento: can't load library markex: can't load library load_object: Symbol "mjlib_setup" not found mjlib: can't load library motex: can't load library rradical: can't load library pixelTANGO: can't load library smlib: can't load library toxy: can't load library unauthorized: can't load library Patco

2 1

Tour coming up!
by Spencer Russell 25 Dec '05

25 Dec '05

Hey there, Just wanted to let all y'all know that my band, Capillary Action is going to be touring the South and East Coast from Dec. 28th to Feb. 2nd. I play bass in the band and do some laptop stuff on my gentoo box with PD. I'm probably not going to be incorporating the laptop stuff at the beginning of the tour, cause I'm still working out some kinks, but maybe if you catch one of the later shows. Check out the tour dates: http://www.capillaryaction.net/tours.shtml Thanks for letting me abuse the list! -spencer

1 0

Patching in Tongues: The PureData Translation Project
by Mathieu Bouchard 25 Dec '05

25 Dec '05

.--------------/ | Introducing < `-o------------\ | | ,-o---------. | drumroll~ | `-o---------' | | `---> Patching in Tongues: The PureData Translation Project http://artengine.ca/mailman/listinfo/patching-in-tongues _ _ __ ___ _____ ________ _____________ _____________________ ... | Mathieu Bouchard - tél:+1.514.383.3801 - http://artengine.ca/matju | Freelance Digital Arts Engineer, Montréal QC Canada

10 15

dynamically abstraction creatiion with connection
by yukio kuroiwa 25 Dec '05

25 Dec '05

hi list, is it possible to create connections between abstractions dynamically? i want to create abstractions dynamically and i would like that my new abstractions appears connected with a subpatch.. how can i do this? thanx yukoi -- yukio kuroiwa yukio_kuroiwa(a)fastmail.fm -- http://www.fastmail.fm - The professional email service

4 3

Re: [PD] Pd-0.38.4-extended-RC6 release
by Hans-Christoph Steiner 25 Dec '05

25 Dec '05

I've installed Pd-0.38.4-extended-RC6.exe on two computers, and on both of them, the file was here: c:\Program Files\pd\pd-settings.reg Its not there on your computer? .hc On Dec 22, 2005, at 9:36 AM, cyborgk(a)nocturnalnoize.com wrote: > I just searched all files in the pd folder, and there is no such file. > Any > ideas? I'm sure I'm missing something simple... > > ~David > >> >> You have to load the libraries. Did you install pd-settings.reg? >> Just >> double-click it and that will do it for you. Its in C:\program >> files\pd once you've installed the package. >> >> .hc >> >> On Dec 21, 2005, at 8:43 PM, cyborg(a)nocturnalnoize.com wrote: >> >>> Hi, most of the objects seem to be missing in Windows! >>> >>> For example, GEM isn't there, and not much else seems to be there >>> either... For example, I tried GrIPD, RRadical, and Vst~ and none of >>> them >>> worked - is there some problem in the latest installer? >>> >>> Thanks, >>> David >>> >>> >>>> Also when trying different patches some objects cannot be found - >>>> are >>>> there some more packages that should be included in the startup >>>> list? >>>> Some examples >>>> freeverb~ >>>> all rrad... >>>> ezdac~ >>>> /Anders >>>> >>>> >>>> Hans-Christoph Steiner wrote: >>>> >>>>> >>>>> http://at.or.at/hans/pd/installers.html >>>>> >>>>> This is a big Windows release, and a bugfix release for GNU/Linux >>>>> and >>>>> Mac OS X. >>>>> >>>>> What's new: >>>>> >>>>> * The Windows release is now compiled with MinGW and has all of the >>>>> same patches to the core as the other two. >>>>> * Preliminary international character support. It seems to work >>>>> fine >>>>> in comments, not yet in objects and messages. >>>>> >>>>> .hc >>>>> >>>>> ___________________________________________________________________ >>>>> __ >>>>> ___ >>>>> ____ >>>>> >>>>> News is what people want to keep hidden and everything else is >>>>> publicity. >>>>> - Bill Moyers >>>>> >>>>> >>>>> _______________________________________________ >>>>> PD-list(a)iem.at mailing list >>>>> UNSUBSCRIBE and account-management -> >>>>> http://lists.puredata.info/listinfo/pd-list >>>> >>>> >>>> _______________________________________________ >>>> PD-list(a)iem.at mailing list >>>> UNSUBSCRIBE and account-management -> >>>> http://lists.puredata.info/listinfo/pd-list >>>> >>> >>> >> >> ______________________________________________________________________ >> __ >> ____ >> >> "Terrorism is not an enemy. It cannot be defeated. It's a tactic. >> It's about as sensible to say we declare war on night attacks and >> expect we're going to win that war. We're not going to win the war on >> terrorism." >> - >> retired U.S. Army general, William Odom >> >> > > ________________________________________________________________________ ____ As we enjoy great advantages from inventions of others, we should be glad of an opportunity to serve others by any invention of ours; and this we should do freely and generously. - Benjamin Franklin

1 0

EQs - FIR or Biquad or others
by Phillip Stearns 24 Dec '05

24 Dec '05

Hello! I'm looking to build a couple of parametric EQs with 4 to 6 poles. At the moment I'm looking at the biquad equations in the help file and can't make heads or tails of them. I can't find anything helpful on the internet either on how those equations relate to the frequency response of the filter. I'm getting into FIR filters but am equally confused. Any suggestions? Has anyone else built parametric EQ modules for me to tinker with? Thanks! Phil __________________________________ Yahoo! for Good - Make a difference this year. http://brand.yahoo.com/cybergivingweek2005/

5 4

2d control surface using GOP datastructures
by Chris McCormick 24 Dec '05

24 Dec '05

Hi, This is a 2 dimensional control surface. The number box adds new controllable points. Banging the inlet outputs a sequence of values (n x y) where n is the number of the controllable point, x is it's normalised x value, and y is it's normalised y value. You can unpack these to assign different points to parameters in your patches. http://mccormick.cx/viewcvs/*checkout*/s-abstractions/s-controlsurface.pd Example usage: http://mccormick.cx/viewcvs/*checkout*/s-abstractions/examples/controlsurfa… This requires pd 0.39-2 and no other externals. Best, Chris. ------------------- chris(a)mccormick.cx http://mccormick.cx

2 2

Re: 2d control surface
by Chris McCormick 23 Dec '05

23 Dec '05

On Fri, Dec 23, 2005 at 07:21:40PM +0100, pd-list-request(a)iem.at wrote: > > Message: 9 > Date: Sat, 24 Dec 2005 03:22:26 +0900 > From: hard off <hard.off(a)gmail.com> > Subject: Re: [PD] Re: PD-list Digest, Vol 9, Issue 95 > To: Jason Plumb <jason(a)noisybox.net> > Cc: pd-list(a)iem.at > Message-ID: > <161320dd0512231022s464fd583wc4719af93a79ab99(a)mail.gmail.com> > Content-Type: text/plain; charset=ISO-8859-1 > > > It seems that I had > > to click in the upper left hand corner of the controller point boxes to > > be able to drag them. > > if you right click on the boxes, and have a look at their properties, > it's possible to set the value for selection area. I don't think this is true. At least, I can't get it to work for me. > The other issue is that it's > > possible to drag those guys outside the canvas (at least temporarily, > > they snap back inside), causing it to provide values outside the the > > 0->1 range. > > (in) > | > [moses 0] > | > [moses 1] > | > (out) Good idea, I'll add this to the patch until such a time as it becomes possible to restrict array values. Chris. ------------------- chris(a)mccormick.cx http://mccormick.cx

1 0

← Newer
1
2
3
4
5
6
7
8
...
21
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

Pd-list December 2005