Pd-list March 2003

pd-list@lists.iem.at

143 participants
300 discussions

methods of storing table size
by Jonathan Gage 13 Mar '03

13 Mar '03

hello, i am wondering if there is any way to store or set Y axis table size in PD? using the resize message i can set the X axis easily, but there seems to be no way to set or save the Y axis. is there any work around? thanks, -jonathan

3 2

Re: [PD] gem-diskwriter? - pix_write
by bbogart＠ryerson.ca 13 Mar '03

13 Mar '03

----- Original Message ----- From: Marc Lavallée <odradek(a)videotron.ca> Date: Wednesday, March 12, 2003 12:14 pm Subject: Re: [PD] gem-diskwriter? > So pix_write must use offscreen rendering. > You should send your reply on the list. > -- > Marc > > Le mer 12/03/2003 à 11:38, bbogart(a)ryerson.ca a écrit : > > there is always pix_write and then reassemble... > > > > Ben > > > > ----- Original Message ----- > > From: Marc Lavallée <odradek(a)videotron.ca> > > Date: Tuesday, March 11, 2003 6:17 pm > > Subject: Re: [PD] gem-diskwriter? > > > > > Since Gem uses accelerated OpenGL, you would need to hack Gem > in order > > > to write video frames on the disk,one by one, using offscreen > > > rendering:http://www.mesa3d.org/brianp/sig97/offscrn.htm > > > > > > The easiest solution is to use a vga to composite converter > (or a > > > videocard that has a composite output) and grab the video from > the > > > converteroutput. I used this technique a few times. > > > -- > > > Marc > > > > > > Le mar 11/03/2003 à 16:57, Stefan Schauer a écrit : > > > > hi! > > > > > > > > is there anything that can write videos to disk > > > > directly out of pd/gem? > > > > > > > > > > > > thnx > > > > schaua > > > > > > > > > __________________________________________________________________> > > > > > > Gesendet von Yahoo! Mail - http://mail.yahoo.de > > > > Bis zu 100 MB Speicher bei http://premiummail.yahoo.de > > > > > > > > _______________________________________________ > > > > PD-list mailing list > > > > PD-list(a)iem.kug.ac.at > > > > http://iem.kug.ac.at/cgi-bin/mailman/listinfo/pd-list > > > > > > > > > _______________________________________________ > > > PD-list mailing list > > > PD-list(a)iem.kug.ac.at > > > http://iem.kug.ac.at/cgi-bin/mailman/listinfo/pd-list > > > > > > >

1 0

mac os x & midi - solutions?
by Peter Solderitsch 12 Mar '03

12 Mar '03

Hi all, I've been searching for this in the archives and haven't been able to find anything that solves the problem: I'm running the newest pd 0.36 "extended version installer" on Mac OS X. I have a Tascam US-428 midi interface set up that's recognized by Mac OS X's "Audio Midi Setup" application. When I launch Pd, though, I never receive any notein signals - When Pd starts up, I get the following trace in my terminal window: pd -midiindev 1 -nomidiout reading startup file: /Users/xxxx/.pdrc TASCAM US-428 MIDI Driver: New Unit 0 OnLine MIDIEndpointSetRefCons: entity: 0x09810007 dest: 0x09810009 con: 0x00057A48 cable: 0 MIDIEndpointSetRefCons: entity: 0x09810007 source: 0x09810008 con: 0x00057A48 cable: 0 MIDIEndpointSetRefCons: entity: 0x0981000A dest: 0x0981000C con: 0x00057A48 cable: 1 MIDIEndpointSetRefCons: entity: 0x0981000A source: 0x0981000B con: 0x00057A48 cable: 1 MIDIEndpointSetRefCons: entity: 0x0981000D dest: 0x0981000F con: 0x00057A48 cable: 2 MIDIEndpointSetRefCons: entity: 0x0981000D source: 0x0981000E con: 0x00057A48 cable: 2 TASCAM US-428 MIDI Driver: ServicePublished 0x0D3FF000 (13) using default input device number: 0 using default output device number: 2 nchan 2, flags 3, bufs 8, framesperbuf 256 I've tried it with -midiindev 0, -midiindev 1, -midiindev 2, nothing works for me, no signals actually get into Pd. Does anyone have any advice on how I might troubleshoot this problem further? Thanks, Peter

1 0

gem-diskwriter?
by Stefan Schauer 12 Mar '03

12 Mar '03

hi! is there anything that can write videos to disk directly out of pd/gem? thnx schaua __________________________________________________________________ Gesendet von Yahoo! Mail - http://mail.yahoo.de Bis zu 100 MB Speicher bei http://premiummail.yahoo.de

3 3

which canvases open on patch startup?
by Nick Fells 12 Mar '03

12 Mar '03

Hi all, Dumb question that continues to fox me and that has been covered before... what determines the canvases that open when one starts up a patch? I have a top level canvas that should open two abstraction canvases; I can't seem to get this to happen. Cheers Nick -- Dr Nick Fells, Music Department, University of Glasgow, Tel: +44 (0) 141-330 4096 Glasgow G12 8QQ Fax: +44 (0) 141-330 3518 UK. http://www.gla.ac.uk/music/staff/nick http://www.gla.ac.uk/music/studio

4 5

Re: [PD] which canvases open on patch startup?
by CK 12 Mar '03

12 Mar '03

I read: > I have two abstractions: > > [avat 0] > > [avat 1] > > which load 'avat.pd' of course, with args 0 and 1 respectively - any > suggestions as to how I'd get these to open at startup? for different locations on screen you might want to save 2 copies of your abstraction (like avat_0.pd and avat_1.pd) for visibility see the attached patches > x@combat:~$ wc -c visible.tar.gz > 321 visible.tar.gz so I thought it was ok to attach it ... HTH, x -- chris(a)lo-res.org Postmodernism is german romanticism with better http://pilot.fm/ special effects. (Jeff Keuss / via ctheory.com)

1 0

Linux/Windows Compatibility
by matthew jones 12 Mar '03

12 Mar '03

Just a quick question I realised I didn't know the answer to. Do pd patches created in a windows environment automatically run the same under linux too? i.e. will my program, written and fully functioning on pd 0.35-1 for windows, run the same on the latest version of pd for linux? how about macOS? The only library the program uses is Zexy. cheers! M

2 1

Re: [PD] Linux/Windows Compatibility
by CK 12 Mar '03

12 Mar '03

I read: > Do pd patches created in a windows environment automatically run the same > under linux too? i.e. will my program, written and fully functioning on pd > 0.35-1 for windows, run the same on the latest version of pd for linux? > how about macOS? > > The only library the program uses is Zexy. cheers! can't see why not, zexy is available on all platforms AFAIK. regards, x -- chris(a)lo-res.org Postmodernism is german romanticism with better http://pilot.fm/ special effects. (Jeff Keuss / via ctheory.com)

1 0

8 bit 8000khz u-law files
by sven 12 Mar '03

12 Mar '03

hello would anybody know what the best way to get mono 8 bit 8000khz ccitt u-law encoded wav files into pd? i've been using sfread~ and they're coming out a little funny... the files come from a vxml application that only encodes things this way. just in case you were wondering why anyone would want such files in pd. thanks -sven

3 2

[gem] problems compiling
by Chris McCormick 12 Mar '03

12 Mar '03

Hi, echo ----------../Particles---------- make[1]: Entering directory `/home/chrism/software/gem-0.87/src/Particles' c++ -c -g -fPIC -I../ -I/usr/include/glib-1.2 -I/usr/lib/glib/include -I/usr/include/gltt -I../../../gem-0.84/src/AuxLibs/particle -I../../../gem-0.84/src/AuxLibs/liborb -I../../../GemLibs/glm -I/usr/local/include -I.. part_color.cpp -o part_color.o part_color.cpp:17: papi.h: No such file or directory make[1]: *** [part_color.o] Error 1 make[1]: Leaving directory `/home/chrism/software/gem-0.87/src/Particles' make: *** [subdirs] Error 255 GEM 0.87, Pd 0.36. Am I missing something stupid here? Where is papi.h meant to come from? I am fairly sure I have all the requisitie libraries installed on my debian 3.0 system. One thing I find curious is why it is including a non-existent directory "../../../gem-0.84/*". Regards, Chris. _________________________________ chris(a)mccormick.cx http://www.mccormick.cx http://www.sciencegirlrecords.com

2 2

← Newer
1
...
14
15
16
17
18
19
20
...
30
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

Pd-list March 2003