Pd-list February 2003

pd-list@lists.iem.at

127 participants
210 discussions

Re: still clicks and crashes
by Kjetil S. Matheussen 21 Feb '03

21 Feb '03

(I'm posting this mail to the pd list too. In case some of the things I have written is wrong, someone will hopefully correct me. The pd in question is the development branch of V0.36 from sourceforge compiled with jack support running on the new type of hammerfall card.) On Thu, 13 Feb 2003, Natasha Barrett wrote: > Hello > > I tested the machine this morning. > > I still hear a lot of clicks. I think this is clearer > when reading and writing into and from an 'array' in Pd, > rather than when playing sound directly off the disk > with something like playsf~ > > I was running root, used Jack with both -R and -s flags. > > Also, Pd often crashes with the following message: > "engine has shut down socket; > stdout: Brokenpipe thread exiting" > That is not good, but I hope its because you are using a development branch of pd. There is an older version of pd with jack-support that might be more stable. > When I start Pd I get this message: > "use of function jack_set_buffer_size_callback() is deprecated" > Thats not a problem. > Any suggestions? Shall I bring the machine back in? > Does this suggest the clicks are due to the buffering > differences? > If the clicks are related to jack, it writes out a message to the shell. But you must not spesify the -s flag for that to happen. If the clicks are related to PD not able to supply enough data to jack, you should get a notice in the shell no matter what you do. If you get clicks but you see no message about it in the shells, the source of the clicks are most probably in your patch. > Natasha > > > "Kjetil S. Matheussen" wrote: > > > I have upgraded your machine heavily with packages > > from planet-ccrma, and installed a low-latency kernel > > and tuned the harddisk. And the result seems promising. > > > > When running jack and pd as root with realtime priority, > > I am unable to produce clicks or pops, even when starting > > and stopping heavy applications as emacs and mozilla. > > It does not seem necesarry to use the -s flag, but > > adding it will not hurt. > --

4 5

Re: [PD-announce] PiDiP 0.8.4 [ more streaming ]
by Yves Degoyon 21 Feb '03

21 Feb '03

grrr, ffmpeg is changing all the time. i had to modify pidip to compile with latest CVS snapshot, so, for those who had problems, please download pidip again. sorry for the inconvenience. sevy/yves Yves Degoyon wrote: > i've been reported some installatrion issues with ffmpeg, > in fact, you should use the CVS snapshot : > > http://ffmpeg.sourceforge.net/cvs/ffmpeg-cvs-2003-02-20.tar.gz > > cheers, > > sevy/yves > > Yves Degoyon wrote: > >> hi, >> >> hum, i had a real hard time doing this one >> and it's not even finished ( just kind of useable now ) >> >> i've added this object : pdp_live~ that enables >> you to receive a video stream ( at least from ffserver ). >> >> i would have liked to test it against >> a video stream form the web >> but i couldn't find a decent one ( 24h stream ?? ). >> if you know of such stream, let me know about it off-list. >> >> from CHANGES.LOG : >> >> 0.8.4 >> added pdp_live~ : receive a video feed, at least from a ffmpeg server >> ( ffserver ) >> fixed resampling in pdp_ffmpeg~ : resizing to a bigger image used to >> crash PD >> ( now, you can't resize to a bigger scale, blame it on libavcodec ) >> >> from KNOWN.BUGS : >> >> pdp_live~ : requires a huge block size to operate ( otherwise, sound >> is shitty ) >> pdp_live~ : sound is played a little bit faster, i guess it should be >> synchronized somehow ( it's not a resampling problem here ) >> >> enjoy!! >> >> sevy/yves >> >> >> _______________________________________________ >> PD-announce mailing list >> PD-announce(a)iem.kug.ac.at >> http://iem.kug.ac.at/cgi-bin/mailman/listinfo/pd-announce >> >> > > > > _______________________________________________ > PD-announce mailing list > PD-announce(a)iem.kug.ac.at > http://iem.kug.ac.at/cgi-bin/mailman/listinfo/pd-announce > >

1 0

Glitch
by Jordan J 21 Feb '03

21 Feb '03

My patch just seemed to slow to a halt and then I had to reboot. When I reloaded the patch it came up like this: http://defaced.net/buck/misc/pd-glitch.JPG . How often can I expect this to happen? I was drawing on multiple arrays to use as sequencers. Thanks. -Jordan

2 1

motu usb on OSX
by Alex from Idoia 21 Feb '03

21 Feb '03

Hi, I don' t manage to use my midi interface at all from pd. The Motu appears in AudioMidiSetUp application of OSX with the Device ID 19 but when I launch Pd, here is what I get: ---------------------------------------------- 0: CoreMIDI, All Cables (input) 1: CoreMIDI, All Cables (input) 2: CoreMIDI, All Cables (input) 3: CoreMIDI, All Cables (input) 4: CoreMIDI, All Cables (input) 5: CoreMIDI, All Cables (output) 6: CoreMIDI, All Cables (output) 7: CoreMIDI, All Cables (output) 8: CoreMIDI, All Cables (output) 9: CoreMIDI, All Cables (output) 10: CoreMIDI, All Cables (output) 11: CoreMIDI, All Cables (output) could not open midi output device number 1: Invalid device ID. using default input device number: 0 using default output device number: 1 Any MacBody?

1 0

Re: [PD] [OT] multichannel soundcards
by Daniel Hawthorn 21 Feb '03

21 Feb '03

The way I got it working was under the ALSA sound drivers, check out www.alsa-project.org, or more specifically, http://www.alsa-project.org/alsa-doc/doc-php/template.php3?company=Midiman&… for information on how to install drivers and configure the device for ALSA. -Daniel justin c. rounds wrote: > could you please provide a link for quattro drivers and/or information > on using it under linux? > > thanks. > > _ > j > > > Daniel Hawthorn wrote: > >> I have a M-Audio Quattro that works wonderfully with Linux + Alsa + >> PD. I hear M-Audio's other devices work great under Linux as well. >> >> -Daniel >> >> Juha Vehviläinen wrote: >> >>> dear list, >>> >>> to keep it short: for multichannel sound in Linux, >>> are there other choices than the RME Hammerfall cards? >>> >>> greetings to all, >>> j. >>> >>> >>> _______________________________________________ >>> PD-list mailing list >>> PD-list(a)iem.kug.ac.at >>> http://iem.kug.ac.at/cgi-bin/mailman/listinfo/pd-list >>> >>> >> >> >> >> _______________________________________________ >> PD-list mailing list >> PD-list(a)iem.kug.ac.at >> http://iem.kug.ac.at/cgi-bin/mailman/listinfo/pd-list >> >> > >

1 0

Re: [PD] Compiling externs with gcc/mingw
by eskogen＠usfamily.net 21 Feb '03

21 Feb '03

my previous should read "pd externs" not buzz externs :P off-topic for my edification: when i reply to the list through a non-standard mail client, how should i format my subject line to reply to a current thread? ------ http://USFamily.Net/info - Unlimited Internet - From $8.99/mo! ------

1 0

re: [PD] Compiling externs with gcc/mingw
by eskogen＠usfamily.net 21 Feb '03

21 Feb '03

there are some good tips here on compiling VST dlls in mingw/gcc for win32, perhaps they can apply to buzz externs? http://www.u-he.com/vstsource/archive.php?classid=5#17 ------ http://USFamily.Net/info - Unlimited Internet - From $8.99/mo! ------

1 0

4 channel out on SBLive,kXdrivers // Latency on WIn98SE PentII350
by Herr Reinhard Gretzki 21 Feb '03

21 Feb '03

Hello, two questions this evening: 1) I tried to get 4 channel output with my win98SE+SBLive+kxProjectdrivers+ pd0.35-1 setup this evening, but when i specify "pd -audiooutdev 0,1" it says "separate audio device choice not supported, using sequential devices" and in fact overrides the "audioutdev" option. Then i tried "pd -asio -r 48000 -audiooutdev 0,1" and nothing changed. By typing "pd -asio -r 48000 -listdev" i came across that there is just one ASIO device (stereo) seen by puredata, despite the fact that the portaudio routines say "Maxoutputs 16". Can anyone give me a hint on this ? 2) ASIO Latency is 65ms on the my Win98SE,PentII350,SBLIVE+kXDrivers Box. MME about 110ms. Latency measured with Millers Latency test patch in the docs. Is this normal for such an old machine ? Or is there anyone out there having better results on an equivalent machine ? On SuseLinux7.1 with ALSA/OSS Emulation i get down to 10ms with the same machine... TIA Reinhard

1 0

sequencing question!!!!!!
by J. Scott Hildebrand 20 Feb '03

20 Feb '03

what kind of facility exists in Pd to do sequencing? inherently or via externals... etc. i've used csound and several windows GUI sequencers, but i don't know anything about how to do it in Pd. ALSO, is there any way to incorporate csound into Pd or have them inter-operable? thanks! scott -------------------------------------------------------------------- "640K ought to be enough for anybody." -- Bill Gates, 1981 --------------------------------------------------------------------

2 1

pd performances
by J. Scott Hildebrand 20 Feb '03

20 Feb '03

can anybody tell me about actual performances that have taken place using pd to do synthesis or to integrate live audio with live/pre-recorded video and/or graphics? i just want to get an idea of what's already been done with pd. happy valentines day! scott -------------------------------------------------------------------- "640K ought to be enough for anybody." -- Bill Gates, 1981 --------------------------------------------------------------------

6 7

← Newer
1
...
5
6
7
8
9
10
11
...
21
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

Pd-list February 2003