Pd-list November 2001

pd-list@lists.iem.at

69 participants
122 discussions

another bug fix ... pd 0.34-4 for NT and linux
by Miller Puckette 24 Nov '01

24 Nov '01

Hi all, The NT release 0-34-3 had bad binaries for the extras such as fiddle~... I've put out a version 0.34-4 to fix this problem (and I hope not introducing any new ones...) Also, in linux land, you can get 0-34-4 in .tar.gz form. The problem with netreceive in UDP mode is fixed... http://crca.ucsd.edu/~msp/software.html cheers Miller

1 0

Fwd: Re: [PD] Plugin~ object!
by Rory Walsh 23 Nov '01

23 Nov '01

mmmhhh...... my file sizes don't match those you posted? I'm using Netscape 4.7 for the downloads? Can I download to windows using a different browser, actually i'm interested in the windows version of plugin so if I could just download to windows it would be handy? --- Norbert Math <math(a)iem.kug.ac.at> wrote: > Date: Fri, 23 Nov 2001 19:14:55 +0100 (CET) > From: Norbert Math <math(a)iem.kug.ac.at> > To: Michal Seta <mis(a)creazone.com> > CC: pd-list(a)iem.kug.ac.at > Subject: Re: [PD] Plugin~ object! > > hello, > > i just succeeded to download from iem with linux > mozilla 0.9.5 > > anyway, as i see from the logs, all november > downloads of > plugin~0.1 (72369 Bytes) and 0.2 (117243 Bytes) > were complete. > please check the sizes against that of your > downloaded files. > > norbert > ... > > On Fri, 23 Nov 2001, Michal Seta wrote: > > > On 11/23/01 5:38 AM, Rory Walsh @ > rorytheroar(a)yahoo.com wrote: > > > > > > > > Ok, whenever I try to gunzip the file it says > error > > > 'unexpected end of file'? I ran the file "----" > > > command and it says its a standard gzip file?, > any > > > more ideas? I have tried with both of the files > > > available formt the ftp page. thanks again, > > > > > > > I've had a similar problems when downloading files > with netscape under > > linux. Try a different browser or, better yet, an > ftp client. > > > > HTH > > > > ./MiS > > > > > > > > __________________________________________________ Do You Yahoo!? Everything you'll ever need on one web page from News and Sport to Email and Music Charts http://uk.my.yahoo.com

2 1

Plugin~ object!
by Rory Walsh 23 Nov '01

23 Nov '01

I have been trying to download and use the plugin~ object but i keep getting errors when I try to unzip it? I have tried downloading both in linux and windows but I keep getting errors? Can anyone help? regards, ROry __________________________________________________ Do You Yahoo!? Everything you'll ever need on one web page from News and Sport to Email and Music Charts http://uk.my.yahoo.com

5 6

FW: [Framestein] 0.23 (Re: [PD] spectrum plotter)
by Michal Seta 23 Nov '01

23 Nov '01

oups... this meant to be directed to the list: ------ Forwarded Message From: Michal Seta <mis(a)creazone.com> Date: Thu, 22 Nov 2001 20:18:16 -0500 To: Juha Vehviläinen <jusu(a)iki.fi> Subject: Re: [Framestein] 0.23 (Re: [PD] spectrum plotter) Hi Juha, hi all this all sounds so interesting. Has anyone ported this thing to Linux yet? ./MiS On 11/19/01 9:49 AM, Juha Vehviläinen @ jusukoti(a)atp.fi wrote: > 0.23 > - fs.film > - fs.hist and example-hist.pd > - fs.sonogram and example-sonogram.pd > - mouserect_1 will report rectangle "drawn" in frame (mousetrack_1 must be > on) > > screenshot of sonogram: http://www.anoema.com/peedees/fshot04.jpg > > http://framestein.org > > juha > ------ End of Forwarded Message

1 0

expr
by Michael Iber 22 Nov '01

22 Nov '01

Hello, speaking of bugs: isn't "expr" supposed to accept "pow" or "^"? pow gives an error message, ^ works as substraction Cheers, Michael Michael Iber http://www.iberspace.de mailto://mail@iber-online.de

2 1

howto load fiddle~ lib?
by oliver stotz 22 Nov '01

22 Nov '01

hi, sorry, this seems quite obvious but i didn't make it: how do i load all those libraries from the "extra"-folder that comes with the windows-version of pd 0.34-3 ? i tried the usual way to load libraries "-lib /<pdpath>/extra/fiddle~" (also tried "fiddle" or "fiddletilde"), which worked fine for the zexy.dll, but always got a "can't load"-reply... do i have to do something first ? thanks for advice oliver

5 5

netreceive (udp)
by IOhannes m zmoelnig 22 Nov '01

22 Nov '01

hi list, hi miller ! the behaviour of the netreceive-object in UDP-mode has obviously changed back again to "old" behaviour (since 0.34-3, but i have somehow skipped this version (in the contect of netreceive/udp)) is it likely that it will change back ? i still consider it very dangerous, to be able to kill pd, write patches, format the harddisk,... via an open udp-connection. i am glad, that it seems to be somehow stable again (speaking in terms of "getting what i sent over the net and not scrambled bytes"), but it breaks all my patches (connecting various computers over the network, relying on udp to avoid crashes).... i would really be glad, if at least a "local" flag (like the "old" flag) could be added to have access to the save behaviour ? so what are the plans for future "netreceive" ? mfg.c.asdr IOhannes

2 1

Still cannot compile Gem on Linux RH 7.1
by Martin Dupras 21 Nov '01

21 Nov '01

Hi, I am still confused as to why I cannot compile Gem successfully on my linux system. Any help would be greatly encouraged. I have a brand new Dell system pre-configured with RedHat linux 7.1, and as I understand, it's the default "install everything" install. I've got pd 0.34-1 installed and running succesfully from the rpm distro; iemlib and sexy, successfully installed and running as well. As per the instructions for Gem 0.84, I have Mesa 4 (which inclues GLUT), tiff, freetype and gltt (and also gltt-devel). I assume that the jpeg library that is referenced in the README.build file in the Gem sources is installed, although the readme file is not too specific on exactly why that is (and the link to it is broken anyway). ./makeauxlibs is successful; ./configure also. make breaks with the error messages listed further below. If anyone's got a clue, I'd be very very grateful. Thanks, - martin --- error messages from 'make': --- make[1]: Entering directory `/usr2/martin_stuff/PD_stuff/gem-0.84/src/Base' c++ -c -g -fPIC -I../ -I/usr2/martin_stuff/PD_stuff/gem-0.84/src/Gnu/../../../gem-0.84/src/AuxLibs/particle -I/usr2/martin_stuff/PD_stuff/gem-0.84/src/Gnu/../../../gem-0.84/src/AuxLibs/liborb -I/usr2/martin_stuff/PD_stuff/gem-0.84/src/Gnu/../../../gem-0.84/src/AuxLibs/td -I/usr2/martin_stuff/PD_stuff/gem-0.84/src/Gnu/../../src/Base -I.. -I/usr/include/gltt GemGluObj.cpp -o GemGluObj.o In file included from ../Base/GemShape.h:16, from GemGluObj.h:16, from GemGluObj.cpp:15: ../Base/GemBase.h:25:8: warning: extra tokens at end of #endif directive GemGluObj.cpp: In method `void GemGluObj::typeMess (t_symbol *)': GemGluObj.cpp:83: `strcmp' undeclared (first use this function) GemGluObj.cpp:83: (Each undeclared identifier is reported only once for each function it appears in.) make[1]: *** [GemGluObj.o] Error 1 make[1]: Leaving directory `/usr2/martin_stuff/PD_stuff/gem-0.84/src/Base' make: *** [subdirs] Error 255 --- end of error messages ---

3 2

more GEM problems under linux
by chris clepper 21 Nov '01

21 Nov '01

ok time to add my troubles with GEM and linux: At 4:51 PM +0100 11/20/01, Bastien Baltazar wrote: >I tried to add in *.cpp : #include <string.h> > And it compiled as well. i had to do the same thing under redhat 7.1, but when i try to run gem, i get an error like 'undefined gxx_personality_v.0'. i think ld is having some trouble finding libraries. this seems to be a problem with the redhat 7.x dists, which seem to be pretty bad all around for compiling cpp stuff... my other big problem is getting gem to run on a PowerPC box. i have tried a few dists and a g3 tower and powerbook but i get the same result: whenever i try to open the gemwindow using the 'create' message pd seg faults. perhaps there is a ppc specific issue here?? or maybe it is related to this: At 12:42 PM +0100 11/21/01, guenter geiger wrote: >Unde linux the create message to gemwin can have an >argument telling onwhich display the window should be created. >Obviously somehow this argument applied in your case,I can immediately see >if this is a bug in Gem or somewhere else... >Can you try to use "create :0" instead of just create and see what happens >? openGL is working fine on each these machines. so any help with these two problems would be greatly appreciated. thanks cgc

1 0

problems with gem'installation on linux
by Bastien Baltazar 21 Nov '01

21 Nov '01

If someone has any experience on GEM with linux platform !! I compiled pd and it work fine. It's not the same for GEM, it don't want to compile because of the abscence of the strcmp function : primTri.cpp: In method `void primTri::typeMess (t_symbol *)': primTri.cpp:126: `strcmp' undeclared (first use this function) primTri.cpp:126: (Each undeclared identifier is reported only once for each function it appears in.) make[1]: *** [primTri.o] Erreur 1 make[1]: Quitte le rÃ©pertoire `/usr/local/src/gem-0.84/src/Geos' make: *** [subdirs] Erreur 255 I tried to add in *.cpp : #include <string.h> And it compiled as well. My openGL environement is working fine with mesademo binaries. When I lauch pd, with verbose and lib flags, it's return all ok : tried /usr/local/lib/pd/externs/Gem.pd_linux and succeeded GEM: Mark Danks GEM: ver: 0.84-5 GEM: compiled: Nov 20 2001 audio I/O stuck... closing audio At the time I create un windows, it returns on std : error: GEM: Could not open display <I error: GEM: Error creating const context error: GEM: A serious error occured creating const Context error: GEM: Do not continue GEM: window created After that, pd crashes when I click in any pd's childrens windows. I wondered if the "display <I" has any link with the $DISPLAY env variable, so I type; on prompt : # echo $DISPLAY :0.0 If someone has a idea ... Regards -- Bastien Baltazar bastien(a)smeuh.org

3 2

← Newer
1
2
3
4
5
6
7
8
...
13
Older →

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

Pd-list November 2001